JBC WS140 High Temperature Precision Wire Stripper Tweezers Instruction Manual
- June 13, 2024
- JBC
Table of Contents
JBC WS140 High Temperature Precision Wire Stripper Tweezers
This manual corresponds to the following reference:
WSST-A
Packing List
The following items are included:
Stand for WS140 ………………………………………………………………………………………………………………….. 1 unit
Features and Connections
Adjustable Cable Collector
Changing W140 Cartridges
-
Removing
Loosen the screws and remove the cartridges. -
Inserting
Insert the cartridge until the reference ring touches the wire stripper. Take the ring as a reference and check that both tips match.
Important: It is essential to insert the cartridge all the way in (up to the ring) for a good connection. -
Positioning
Align the tip edges and fi x the cartridge in its working position. -
Fixing
Tighten the screw.
Important: It is essential to tighten the screws for the tool to function.
Operation
Depending on where the tool is located, the soldering station switches between three different statuses: Work, Sleep and Hibernation.
Troubleshooting
Station troubleshooting available on the product page at
www.jbctools.com
Cartridge Range
WS140-A is compatible with W140 Blade Cartridge Range. Find the model that best suits your soldering needs on www.jbctools.com
Cartridge
Ref.
| Tip Hole ø
mm / in
| AWG
Solid
| AWG
Stranded
| | |
---|---|---|---|---|---|---
W14040G| | 40| x
W14038G| | 38| x
W14037G| | 37| x
W14036G| | 36| x
W14034G| | 34| 36 (7×44)
W14032G| | 32| 34 (7×42)
W14030G| | 30| 32 (19×44)
W14028G
|
0,32 / 0,0126
|
28
| 30 (7×38)
30 (19×42)
W14026G| 0,40 / 0,0157| 26| 28 (19×40)
27 (7×35)
W14024G
|
0,51 / 0,0201
|
24
| 26 (19×38)
26 (10×36)
Cartridge
Ref.
| Tip Hole ø
mm / in
| AWG
Solid
| AWG
Stranded
| | |
---|---|---|---|---|---|---
|
W14022G
|
0,64 / 0,0252
|
22
| 24 (19×36)|
24 (7×32)|
W14020G| 0,81 / 0,0319| 20| 22 (19×34)|
W14018G
|
1,02 / 0,0402
|
18
| 20 (42×36)|
20 (19×32)|
20 (7×28)|
Cartridge
Ref.
| Tip
mm / in
|
---|---|---
W14003F
|
Flat Tip 3 / 0.118
Cartridge
Ref.
| Tip
mm / in
| ****
---|---|---
W14005F| Flat Tip 5 / 0.197
If an application requires a special tip design, contact JBC by mail customtips@jbctools.com for special blade cartridges.
Accessories
Maintenance
Before carrying out maintenance or storage, always unplug the stand from the station and the tool.
- Use a damp cloth to clean the stand. Alcohol can be used only when cleaning the metal parts.
- Check periodically that the metal parts of the tool/stand are clean so that the station can check the tool’s status.
- Periodically check all cables and tube connections.
- Replace any defective or damaged parts. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
Safety
It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion.
Warning
- Do not touch the blade or the metal parts around.
- Do not allow the blade be close to flammable materials.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when working to avoid personal harm.
- This appliance can be used by children over the age of eight and also persons with reduced physical, sensory or mental capabilities or lack of experience provided that they have been given adequate supervision or instruction concerning use of the appliance and understand the hazards involved.
- Maintenance must not be carried out by children unless supervised.
- Place the tool on the stand when is not in use.
- Turn off the power when not in use, changing parts or storing.
Caution
- Do not use the Wire Stripper for other applications than wire stripping.
- Do not modify or customize the Wire Stripper.
- Do not hit the blade against workbench to eliminate stripped insulation debris. This behavior would damage the blade.
- Remove power from the tool by holding the plug, not the wires.
- Be careful with the fumes produced when stripping. We recomend to use our fume extractor.
Specifications
WSST
Stand for WS140 High-Temperature Precision Wire Stripper Tweezers
Ref.: WSST-A
- Total Net Weight 1.30 kg / 2.97 lb
- Package Dimensions/Weight 342 x 155 x 120 mm / 1.64 kg
(L x W x H) 13.46 x 6.10 x 4.72 in / 3.61 lb
Warranty
JBC’s 2 year warranty covers this equipment against all manufacturing defects,
including the replacement of defective parts and labour.
Warranty does not cover product wear or misuse. In order for the warranty to
be valid, equipment must be returned, postage paid, to the dealer where it was
purchased.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at
the end of its life must be collected and returned to an authorized recycling
facility.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>