sunlite 89308-SU Led Recessed Eyeball Ceiling Fixtures Instruction Manual
- June 5, 2024
- sunlite
Table of Contents
sunlite 89308-SU Led Recessed Eyeball Ceiling Fixtures
INSTALLATION INSTRUCTIONS
IMPORTANT: Read all instructions before installing fixtures. Retain for
future reference.
SAFETY: For your safety, this fixture must be wired in accordance to
local electrical codes and ordinances. All work should be done by a qualified
electrician.
WARNING:
- Make certain power is OFF from the electrical panel before starting installation or attempting any maintenance. Indoor installation only.
- Do not co-mingle different sizes and style of Dim to Warm fixtures on the same dimmer, not all fixtures will exhibit the same correlated color temperatures at the same dimming level.
TOOLS REQUIRED:
- Saw
- Measuring Tape
- Electrical Wiring (use type and gauge suitable for application to connect the fixtures)
ASSEMBLY INSTRUCTIONS
Installation
- Turn power OFF from the electrical panel before starting installation. (Fig. 1)
- Locate a suitable position to place the fixture and open a hole in accordance to the cut-hole dimensions.(Fig. 2)
- Run the electrical wire from the switch (power supply) through the mounting hole – use NMD90 Romex or BX cable.
- Open the hardwire box swing cover and remove the appropriate knockout(s).
- Insert the electrical supply cable through the knockout and secure with a cable connector.
- Wire box using supplied quick connect push-in terminals. Connect green ground wire of cable to green wire on box. Connect white wire of cable to white wire of box. Connect black wire of cable to black wire of box. (Fig. 3)
- Place all wiring and connections back in to the box and close the cover.
- New construction applications: Hardwire box shall be firmly secured to studs, joists, or similar fixed structural units. Remodel applications: Do not require the hardwire box to be firmly secured after the mounting plates, studs, joists, or structural units that have been concealed. Connect the DC terminals, and then insert hardware box into ceiling (Fig. 4).
- Push spring loaded clips on the fixture upwards and insert fixture base in to the mounting hole. Release the clips and fixture will be pulled flush to the ceiling. (Fig.5)
- Once assembly is complete, turn on power to confirm fixture is working properly.
Sunshine Lighting Company • 744 Clinton Street Brooklyn, NY 11231, USA • T. 718.768.7000 • F. 718.768.0970 •www.sunlite.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>