INDESIT UI6 F2T W Vertical Freezer User Guide
- June 17, 2024
- INDESIT
Table of Contents
QUICK START GUIDE
Read the Instructions for Use carefully before using the appliance.
- Control panel
- LED’s lighting*
- Ice packs*
- Ice Mate or Ice tray
- Drawer divider*
- Bottle rack*
- Glass shelves
- Rating plate with commercial name
- Door reversibility kit
- Area for freezing fresh food or to store frozen food
- Area for storing frozen foods
- Door seal
- Available on selected models
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, it starts the operation automatically. After starting the appliance, wait at least 4-6 hours before placing food into the appliance. When the appliance is connected to the power supply, the display lights up and all the icons appear on the display for approximately 1 second. The default (factory) values of the freezer compartment settings light-up.
HOW TO REVERSE THE DOOR SWING
– see enclosed Instructions for Use (Version_2)
Is recommended to reverse door swing by two persons.
There is not foreseen door reversibility for:
– models with integrated handle
– models with glass panel on the door.
Specifications, technical data and images may vary from model to model
To receive the assistance call the number shown on the warranty booklet or follow the instruction on the web sitewww.indesit.com
1. ALARM indicator (see the below Alarms Table)
2. ECO NIGHT indicator
3. BLACK OUT ALARM
Long Black-out Alarm indicator. (see the Instructions for Use)
4. ECO NIGHT (NIGHT TIME RATE) button
Press to activate/deactivate the Eco Night function. The Eco Night function
enables appliance energy consumption to be concentrated in the reduced rate
hours, generally at night (see the Instructions for Use)
5.STOP ALARM button
Press in case of alarm.
6. TEMPERATURE/FAST FREEZE button
Temperature Setting
The appliance is normally factory-set for operation at the recommended
temperature of -18°C.
The internal temperature can be adjusted between -16°C and – 24°C, proceeding
as follows:
• Press the temperature setting button (°C). The storage temperature can be
changed by -1°C with each pressure of the button: the value changes cyclically
between -16°C and -24°C.
Fast Freeze
• Press for 3 seconds to activate the Fast Freeze function (see the
Instructions for Use)
The function switches off automatically after about 50 hours.
7.PARTY MODE button
Press to activate/deactivate the Party Mode function. Use this function to
chill drinks inside the freezer compartment.
Important: do not leave the bottle inside the freezer compartment longer
than the function is active (30 minutes).
8. ON/STANDBY button
To put the product in Stand-by, press and hold for 3 seconds. All the icons
turn off except On/Standby indicator . To reactivate the appliance press once
(briefly) this button.
9. FAST FREEZE indicator
10. ON/STANDBY indicator
11. PARTY MODE indicator
12. TEMPERATURE DISPLAY
ALARMS TABLE
| ALARM TYPE | Signal | Cause | Cure |
|---|---|---|---|
| Door open alarm | The acoustical alarm is activated and the Alarm Indicator | ||
| blinks. | The door has remained open for more than 2 minutes | Close the door or |
press the Stop Alarm to mute the acoustical alarm.
Temperature alarm| The Temperature display blinks (°C) and the Alarm Indicator
remains on.| The inside temperature is not adequate.| Press the Stop Alarm
button ; the acoustical alarm stops, the Temperature Display (°C) and the
Alarm Indicator remain on until a temperature < -10°C is reached.
Party Mode alarm| The Party Mode Indicator blinks and the acoustical alarm is
activated. | 30 min. elapsed since Party Mode function has been activated. It
is time to take out the bottle from the freezer (see Instructions for Use for
more details).| Press the Party Mode button or alternatively Stop Alarm button
to deactivate the Party Mode alarm – and remove the bottle from the freezer.
Long black-out alarm| The Black Out Alarm icon remains on, the Alarm indicator
blinks and the Temperature display (°C) blinks, showing the maximum
temperature reached during blackout.| Prolonged power failure, able to cause
the inside temperature to increase to 0°C.| Press the Stop Alarm button ; the
acoustical alarm stops, the Temperature Display (°C) and the Alarm Indicator
remain on until a temperature < -10°C is reached.
Malfunction| The letter “F” blinks on the display (°C).| Product malfunction.|
Contact the After-sales Service.
5897110402
Printed in Italy 04/17
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>