sunlite 85461-SU 1X4 LED Flat Panel Instruction Manual
- June 4, 2024
- sunlite
Table of Contents
sunlite 85461-SU 1X4 LED Flat Panel
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING: Avoid fire or electric shock. Follow installation instructions carefuly. If unsure about electrical installation, consult a qualified electrician. Wear rubber-soled shoes and work on a sturdy wooden ladder. Ground fixture to avoid potential electric shock. Handle metal parts carefully to prevent cuts. To avoid a hazard to children, account for all parts and destroy all packing materials. This product is only suitable for indoor damp applicatiorns.
CAUTION: Turn off the power at fuse or circuit breaker box before
installation and maintenance. Fixture must be installed according to National
Electric Code and local building codes. If you are unsure about wiring,
consult a qualified electrican. maintenance. Fixture must be installed
according to National Electric Code and THIS FIXTURE BODY IS ONE PIECE, DO NOT
DISASSEMBLE OR MAKE ALTERATIONS.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interence,
and (2) this device must accept any interence received, including that may
cause undesired operation.
Models
- FOR 1×4 LED FLAT PANEL
- 2×2 LED FLAT PANEL
- 2×4 LED FLAT PANEL
INSTALLATION
INSTALLATION STEPS
- Figure 1 &2: Place panel light above the keel (G) of suspended ceiling.
- Figure 3: Connect Land N wires as shown.
- Figure 4: If using 0-10V dimming, connect wires to the DIM+and DIM- interface as shown.
SALE on Sunlite @ www.BulbAmerica.com take additional 5% Off with coupon code 5PDF
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>