sunlite 85221-SU LED Lay-In Troffer Fixture Instruction Manual

June 4, 2024
sunlite

sunlite 85221-SU LED Lay-In Troffer Fixture

sunlite 85221-SU LED Lay-In Troffer Fixture

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING: Avoid fire or electric shock. Follow installation instructions carefully. If unsure about electrical installation, consult a qualified electrician. Wear rubber-soled
shoes and work on a sturdy wooden ladder. Ground fixture to avoid potential electric shock. Handle metal parts carefully to prevent cuts. To avoid a hazard to children, account for all parts and destroy all packing materials. This product is only suitable for indoor applications.

CAUTION: Turn off the power at fuse or circuit breaker box before installation and maintenance. NOTE: This fixture should be used on a 120-Volt fused circuit (check fixture labeling). Fixture must be installed according to National Electric Code and local building codes. If you are unsure about wiring, consult a qualified electrican.
THIS FIXTURE BODY IS ONE PIECE, DO NOT DISASSEMBLE OR MAKE ALTERATIONS.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interence, and (2) this deivce must accept any interence received, including that may cause undesired operation.

Installation

sunlite 85221-SU LED Lay-In Troffer Fixture-1

Installation Steps:

sunlite 85221-SU LED Lay-In Troffer Fixture-2

  • Figure 1: Bend out mounting tab 90 degrees on each corner.
  • Figure 2: Use side cutters to adjust each tab to height of T-grid.
  • Figure 3: Lay fixture into T-grid.
  • Figure 4: Bend tabs flush against T-grid in order to clear corner for ceiling tile.
  • Figure 5: Use a #8×1/4″ sheet metal screw to fasten fixture to T-grid and use a hanger wire to tie off appropriately in accordance with local building codes (screws and hanger wires not included)
  • Figure 6: Ensure that the wiring of the last fixture in the row is properly terminated. Then make all electrical connections to the fixture. Attach the wiring access cover plate.

SALE on Sunlite @ www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

sunlite User Manuals

Related Manuals