Backyard DISCOVERY Ridgedale 8 ft. x 8 ft. White Steel Modern Cabana Pergola Owner’s Manual

Backyard DISCOVERY Ridgedale 8 ft. x 8 ft. White Steel Modern Cabana

Pergola

Safety Warnings and Maintenance Instructions

WARNING
IT 15 IMPORTANT TO CHECK AND TIGHTEN ALL HARDWARE AT THE BEGINNING AND DURING THE SEASON AS THEY MAY LOOSEN DUE TO EXPANSION AND CONTRACTION.

• DO NOT climb or walk on the roof for any reason
• Requires two or more people to assemble safely
• Check for underground utilities before digging or driving stakes into the ground.
• Check carefully for overhead lines and ensure there is at least 6ft (2m) clearance from any overhead electrical wires.
• Permanent structures may require a building permit. As the purchaser and or installer of this product you are advised to consult local planning, zoning and building inspection departments for guidance on applicable building codes and/or zoning requirements.
• Wear gloves to avoid injury during installation.
• During installation, follow all safety warnings provided with your tools and use safety glasses.
• Check all nuts and bolts twice monthly during the usage season and tighten as required. It is particularly important that this procedure be followed at the beginning of each season.
• Oil all metallic moving parts monthly during the usage period.
• Check all coverings for bolts and sharp edges twice monthly during usage season to be certain they are in place. Replace when necessary. It is especially important to do this at the beginning of each new season.
• For rusted areas on metallic members such as hinges, brackets, etc. sand and repaint, using a non lead-based paint meeting the requirements of Title 16 CRF Part 1303.
• Touch up paint is available through Backyard Discovery. Please have the product number tag available for reference for customer support. This insures the correct color will be provided.

Assembly Tips & Tools Required

ASSEMBLY TIP :  Keep and eye out for these boxes which will contain helpful pictures and information making the assembly process as quick and painless as possible.

Sorting Parts

When removing the parts from the boxes we recommend arranging them by part number before you begin assembly. This will allow for faster assembly and easily identify any parts that may be missing or damaged.

Hardware Identification

Hardware is identified with a seven digit alpha-numeric part number. During assembly you only need to reference the last three digits of the part number as noted in each step. This will make finding the correct hardware easier.

Tools Required

• Some steps in the assembly process will require a second set of hands. Make sure you have a helper available.
• For proper assembly you will need to ensure that your structure is level before proceeding to the next step.
• A ladder will be needed for assembly. DO NOT stand or climb on any part of the structure at any point. Doing so may result in injury.
• A Phillips head screw driver will be used in an assembly step.
• You will need to make sure that your assembly is square before fully tightening your bolts.
• A tape measure may be needed to check overall dimensions to ensure structure is square.
• A rubber mallet may be useful during the assembly process.

 Basic Setup Dimensions & Assembly

It is critically important that you start with square and level footings, concrete pad or deck to attach your structure
• Pay close attention to the items needed for each step. Make sure you are using the correct hardware for each step. Using incorrect hardware may result in improper assembly
• Remember to double check for underground utilities and overhead electrical lines
Post mounts are provided with your structure which allows you to permanently install your structure to a pre-existing or new wood or concrete surface.
• The hardware to attach the post mounts to the structure is included.
• The hardware to mount the structure permanently to a concrete surface is NOT included.
• The hardware to mount the structure permanently to a wood deck is NOT included and will need to be purchased separately. You must ensure there is ample structural support under the deck before permanently attaching.

Metal Roof Assembly
Remove plastic covering from metal roof panels before installing each piece. Place roofing materials on a nonabrasive, flat surface before and after assembly as it could bend, dent or scratch

Overall Dimensions

Documents / Resources

| Backyard DISCOVERY Ridgedale 8 ft. x 8 ft. White Steel Modern Cabana Pergola [pdf] Owner's Manual
Ridgedale 8 ft. x 8 ft. White Steel Modern Cabana Pergola
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>