ZKTECO Aurora T1 User Guide

ZKTECO Aurora T1

 Overview

• * Front View

  • Rear View
  • Side View

 Packing List

• Device
• 5V Power
• 3M Tape
• User Guide
• Screws

Device Installation

1. Mount on the Desk
   •  Hold the Device with both the hands, and rotate the back cover to 180 degree to disassemble the Device.
   •  Pass the power cable through the wiring hole of the back cover and insert it into the power interface.
   •  After wiring the power cable, push the back cover onto the Device, and rotate it in the clockwise direction to close it.
   •  Use the 3M double-sided tape to fix the device on the desktop
2. Mount on the Wall

   •   *  Hold the Device with both the hands, rotate the back cover to disassemble the Device.

   •  Pass the power cable through the wiring hole of the back cover and insert it into the power interface.
   •  Push the back cover on the wall then drill holes, and then fix it with expansion tubesand screws.
   •  Attach the Device onto the back cover, and rotate the Device in the clockwise direction to close it.

CONNECT  THE DEVICE

Step 1: Software Application Access

In the software, the users need to be added and set with Mobile App access on the Web in advance. Then the users can activate the Mobile App account and login to the mobile App. Each account can only be bound to one phone.

• Email: The account for logging in to the App.
• User Permission: Select the User Role with Admin access.
• APP Access: Select Enable APP Access to enable the user to use the APP.
• Assign License: Click to assign App license for the users.

Step 2: Create the Area

In the software, the device areas need to be created on the Web in advance. Click Work > Device >Area on the Web. Code: Enter the serial number of the device. Area Name: Create the name of the area.

Step 3: Download APP

Step 4: Activate and login the APP account

Open the ZKBioCloud APP, enter the registered account and password on the App interface, and then login after the account is activated.

Step 5: Bind Device

Power on the Device. Switch to the Work interface in the ZKBioCloud APP; tap Device to enter the Device management interface; tap + in the upper right corner to add the Device; select the Bluetooth Device, and the phone will automatically search for the device.

NOTE

• *  In the mobile phone turn on the bluetooth function, and the location service.

  •  The device needs to be close to the phone to avoid the search failure.

 After the bluetooth connection is successful, it will automatically navigate to the “Network Setup” page. Select the corresponding wifi, and enter the password. (The Device flashes yellow when it connects the Wifi successfully, and after it is successfully connected to the server, the light turns to green.) When the Device is successfully connected to the network, the Device name, Time Zone and Area can be changed according to the actual requirement. MAfter the successful connection of the Device, the server automatically sends data to the Device.

Enroll Fingerprint

Switch to the Work interface in the ZKBioCloud APP, tap My Team in the Attendance list interface, and then select the employee who needs to enroll fingerprint. Tap Enroll Biometric Template, then select the Enroll Fingerprint, and then register the fingerprint on the Device according to the prompts of the Device.

Punch/Verify

After successful enrollment, the user can punch on the device, or through the APP. The following figure shows the punch records on the APP:

Export Attendance Report

On the ZKBioCloud web side, select Reports and enter the information of the required employee to generate the report. There are 9 types of reports that can be viewed, as shown below:

Note: For more details, please refer to the ZKBioCloud User Manual or the ZKBioCloud APP User Manual.

FCC RULES

Warning; Any Changes or modifications not expressly approwed by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not accur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by Tuning the equipment off and on, the user is encouraged to try to correct the interforence by one or more of the following measures: Reorient or relocate the receiving antenna. increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealeror an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the follawing two conditions:

•  This device may not cause harmful interference
•  This device must accept any interference received, including interference that may cause undesired operation.

ZKTeco Industrial Park, No. 26, 188 Industrial Road, Tangxia Town, Dongguan, China. Phone +86 769-82109991 Fax 486 755-89602394 www.zkteco.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>