ZKTECO VE06A01 Video Door Entry Multiunities Installation Guide
- October 30, 2023
- ZKTECO
Table of Contents
ZKTECO VE06A01 Video Door Entry Multiunities
Please read the instructions carefully before use to ensure correct and proper operation.
Product Description
This set of products is a visual color home intercom doorbell. The system consists of an outdoor unit and an indoor unit. The indoor unit is powered by network cable to realize doorbell call, intercom monitoring, remote unlocking and network cable connection.
- The display screen is LCD, the image is clear and transparent, and the color is gorgeous without distortion.
- The camera has an HD CMOS sensor.
- The outdoor unit can use an ID card to open the door.
- In case the outside light is insufficient, it will automatically start the infrared night vision lighting.
- The door can be opened from the indoor unit.
- Outdoor unit requires 12-15V independent power supply, also indoor unit requires independent power supply.
- The panel needs 12-15V power supply (recommended to use class V or VI network cable for connection, 2-core or 1-core), and the maximum service distance is 150m.
Product Introduction
The indoor unit has the following features:
- LCD a Color
- Microphone Silence
- Adjust volume and replace ringtone
- Monitor Open
- Speak
- Connection for another indoor unit volume adjustment
- DC 15V power supply
- Brightness adjustment
- Color adjustment Connection with another external drive
The outdoor unit has the following features:
- Camera
- Infrared LED
- Speaker
- Bell button
- Card reading area
- Microphone
- Area address setting zone
- Electronic lock sign
Parameters
- Monitoring time: 90 seconds
- Communication time: 90 seconds
- Ringtone: 25 tones
- Installation Mode: Wall Mounted
- Signal Interface: 5P x 2.54
- Outdoor unit CMOS HD camera Material: Aluminum Alloy
- Cards: Number of cards – 500
- IR distance: 0.2-1m
- Power supply: Special power adapter
Indoor unit operation
Set indoor unit ringtone
- Ringtone setting: In indoor unit standby mode, firstly press the button to turn on the screen, and then press the button to turn off the buzzer and intercom, without affecting the image display. If you need to turn on the doorbell and intercom, please press the button again in monitor mode. The interruption-free mode will be activated after activating the mute function.
- Change ringtone: In indoor unit standby mode, press the button first to turn on the display, and then press the button to turn on the ringtone and enter change ringtone setting. The system comes with 25 ringtones of different lengths. The last ringtone will be the ringtone when the system is powered on.
- Ringtone volume adjustment: In indoor unit standby mode, press the button first to turn on the display. Press the button, the buzzer will ring to enter the buzzer setting, it has three levels: large, medium and small. Press for two seconds at a time to gradually increase or decrease the volume. If the device is powered off, all ringtone settings will be restored to factory settings.
Instructions for the operation of the doorbell
- When any visitor presses the call button of the outdoor unit, the screen of the indoor unit will display the outdoor image in real-time and the doorbell will sound.
Machine Translated by Google
Please read the instructions carefully before use to ensure correct and proper operation.
Product Description
Product Introduction
This set of products is a visual color home intercom doorbell. The system
consists of an outdoor unit and an indoor unit. The indoor unit is powered by
network cable to realize doorbell call, intercom monitoring, remote unlocking
and network cable connection.
The display screen is LCD, the image is clear and transparent, and the color
is gorgeous without distortion. The camera has an HD CMOS sensor. The outdoor
unit can use an ID card to open the door. In case the outside light is
insufficient, it will automatically start the infrared night vision lighting.
The door can be opened from the indoor unit. Outdoor unit requires 12-15V
independent power
supply, also indoor unit requires independent power supply.
The panel needs 12-15V power supply (recommended to use class V or VI network
cable for connection, 2-core or 1-core), and the maximum service distance is
150m.
Product introduction
- Camera
- Infrared LED
- speaker
- Bell button Card
- microphone reading area
- Area address setting zone
- electronic lock sign
Parameters
Indoor unit operation
Set indoor unit ringtone
Ringtone setting
In indoor unit standby mode, firstly press “ ” button to turn on the screen,
and then press ” ” button to turn off the buzzer and intercom, without
affecting the image display.
If you need to turn on the doorbell and intercom, please press the “ “ button
again in monitor mode “ ”.
The interruption free mode will be activated after activating the mute
function.
Change ringtone
In indoor unit standby mode, press “ “ button first to turn on the display,
and then press “ button to turn on ringtone and enter “change
“
ringtone” setting. The system called is by equipped anyone. with 25 ringtones
of different lengths. The last ringtone will be the ringtone when the system
is
Ringtone volume adjustment In indoor unit standby
mode, press “ “ button first to turn on the display.
Press “ ” button, the buzzer will ring to enter the buzzer setting, it has
three levels: large, medium and small. Press for two seconds
at a time to gradually increase or decrease the volume.
If the device is powered off, all ringtone settings will be restored to
factory settings.
Instructions for the operation of the doorbell
-
When any visitor presses the call button of the outdoor unit, the screen of the indoor unit will display the outdoor image in real time and the doorbell will sound.
-
The indoor user will be able to press the button “ to talk to the visitor.
Note: press the “ button for the first time to open the call, the second time you press call. The screen will automatically will close the turn off after 30 seconds of no response. -
In intercom mode, indoor user can press “ “to open the door.
-
In intercom mode, indoor user can press “talk” button, it will end automatically in 90 seconds.
-
5.If it is necessary to resume the conversation after hanging up, press the “ “ button first and then the “ button to talk to the visitor.
-
In indoor unit standby mode, press “ ” button first and then “ ” button to open the door; the screen will turn off automatically in 90 seconds, “ or you can turn it off by pressing the “ a turn.
ID card instructions
- Management card creation: management switch key up, the outdoor unit is turned on (sounds “Di”), the first system defaults to add the card (sounds “Di”), and the second system defaults to delete the card (“Di” sounds), then power off, lower the management switch key, and the management card is done.
- Add user card: when the outdoor unit is in power-on standby mode, swipe the management card (“Di” tone), then swipe the user card (“Di” sounds), and increment continuously. For each additional card (“Di” sounds), after swiping the user card, finally present the management card to exit (“DiDi” sounds twice), and the user card addition will be finished.
- Delete single user card: when the outdoor unit is in standby mode, slide to delete the card (“Di” sounds once), then swipe the user card to be deleted (place on the swipe area of the card for 2 seconds, “Di” beeps once, and then “Di” beeps again 2 seconds later), clear continuously, swipe each card (“Di” beeps once), and finally present the management card after swiping the card to be deleted (“Didi” beeps twice), the card deletion is complete.
- Delete all user cards: when the outdoor unit is in standby mode, slide to delete the card (sounds “Di”), then slide to add the card (sounds “Di”), and then slide to delete the card. card again to exit (“Di” beeps once, and “DiDiDiDiDi” beeps seven times after 2 seconds). All user cards are deleted.
- Invalid card swipe: “DiDiDi” beeps three times continuously.
Installation
Product diagram
Copyright © 2022, ZKTeco CO., LTD. All rights reserved.
ZKTeco may, at any time and without prior notice, make changes or improvements
to products and services or stop their production or marketing.
ZKTeco logo and brand are owned by ZKTeco CO., LTD.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>