LEITZ IQ Autofeed Shredders Instruction Manual

: June 5, 2024
: LEITZ

Table of Contents

LEITZ IQ Autofeed Shredders
INSTRUCTIONS FOR USE
Operation
Safety Instruction
Warning
Shredding Media
Operation
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LEITZ IQ Autofeed Shredders

INSTRUCTIONS FOR USE

Model Matrix

Model Leitz

| Sheets Auto| ****

Cut

| Sheets Manual| ****

Bin Size

| ****

Amperage

---|---|---|---|---|---
IQ Autofeed Small Office 50 P4| 50| P4 (Cross)| 6| 20| 0.8
IQ Autofeed Small Office 100 P4| 100| P4 (Cross)| 8| 34| 1.2
IQ Autofeed Small Office 100 P5| 100| P5 (Micro)| 6| 34| 1.2
IQ Autofeed Office 150 P4| 150| P4 (Cross)| 8| 44| 1.2
IQ Autofeed Office 150 P5| 150| P5 (Micro)| 6| 44| 1.2
IQ Autofeed Office 300 P4| 300| P4 (Cross)| 10| 60| 1.6
IQ Autofeed Office 300 P5| 300| P5 (Micro)| 8| 60| 1.6
IQ Autofeed Office Pro 600 P4| 600| P4 (Cross)| 15| 110| 1.8
IQ Autofeed Office Pro 600 P5| 600| P5 (Micro)| 10| 110| 1.8

Operation

Safety Instruction

Only use the unit for its intended purpose.
The unit must only be connected to a supply voltage corresponding to the electrical rating shown on the unit.
The unit should be connected to a socket outlet near the equipment that is easily accessible.
Do not connect multiple adaptors or use an extension cable.
Failure to follow these instructions could result in damage/injury and will invalidate your guarantee.
Do not attempt to service or repair the unit yourself.
If recycling, separate paper, and credit card shreds.
Do not use this unit if the cable or plug has been damaged.
Care should be taken when moving equipment to avoid any unlevelled surfaces.
Please read all the safety information and the instructions; the manufacturer is not liable for cases of material damage or personal injury caused by incorrect handling or non-compliance with the safety instructions. In such cases, the warranty will be voided.
The device is intended for use indoors. Never use outdoors.
Keep the device away from moisture.
Be vigilant at all times, and always be careful what you are doing. Do not use electrical equipment if you are lacking in concentration or awareness, or are under the influence of drugs, alcohol or medication. Even a moment of inattentiveness can lead to serious injuries when using electrical equipment.
Do not attempt to open, modify or repair the device. Do not drop, puncture, break or expose to high pressure.
Alterations to the device and technical modifications are not permitted.
Check the device and cable (and if applicable, the adapter) for any damage before use. If there is any visible damage, a strong odour, or excessive overheating of components, unplug all the components immediately and stop using the device.
Shredder must be disconnected from the power source if not used for an extended period of time.
Do not use spray cleaners or spray lubricants as these may present a risk of flash fire.
Never bypass the safety interlock (strictly forbidden and dangerous, especially when unit is connected to a power source).

Warning

Keep loose jewelry clear
No credit cards
Do not touch cutters,
beware of sharp edges.
Moving parts hazard, keep
hands away from rollers
whilst in operation.
No CDs
This equipment is not intended for use by children
No aerosols. Do not use spray cleaners or lubricants, as these may
No heavy-duty staples above 26mm

Hopper filling

Maximum sheet level
no heavy-duty staples above 26mm
no more than 25 sheets stapled together
no bound documents
no multiple folded sheets
no paperclips above 76mm
no plastic sheets
no unopened mail
no magazines
no paper or card above 200gsm

Shredding Media

CAN shred the following:

Stapled paper, 25mm within the corner
26/6 and 24/6 or smaller staples
Small-sized paper loaded centrally
Paperclipped paper, 25mm within the corner (through the manual feed slot)
Capable of shredding small/medium paperclips (max. wire thickness = 0.9 mm)
80/100gsm paper (through the manual feed slot)

CAN shred (through the manual feed slot):

Thick paper or card <200gsm
Unopened mail (junk mail)
Multiple folded sheets (A3 sheets folded in half).
Glossy paper or a sheet covered with print on both sides.

CANNOT shred the following:

Operation

Unpack the product.
Connect the shredder to the main supply.
Ensure the ON/OFF button on the back of the machine is in the ON position, which will illuminate the blue standby symbol.
To load the shredder, simply lift the loading door handle to open the loading door and insert documents. You can open the door further to 90 degrees for easier access if required. Load up to MAX sheets at a time into the feed chamber. Do not fill above the MAX level, this could damage the shredder.
The shredder will start the shredding cycle automatically ONLY after closing the loading door. If there is still paper in the AutoFeed chamber after the first attempt, open and re-close the paper loading door a second time. At tension: If required you can now lock the loading door by entering a 4-digit code (see Locking the Paper Loading Door section).
If you only have a few sheets to shred, you can use the manual feed slot, provided the auto-feed chamber is empty.
I insert paper to be shredded into the feed area. The shredder will detect the paper and start automatically.
If the shredder is left in auto mode for more than 2 minutes without being used, the shredder will automatically turn back to sleep mode in order to save power.
The shredder will automatically ‘wake up from sleep mode when the paper is inserted into the shred mouth or you open the loading door. There is no need to press the Auto button.

Reverse function

Should you wish to reverse paper out whilst shredding, a reverse button has been fitted for your convenience.
Reverse the paper out then turn the machine off using the ON/OFF switch at the rear of the shredder. Remove the paper from the manual feed slot (if being used) or open the loading door, remove the remaining stack of paper, then pull the jammed paper free of the cutting mechanism.
To resume shredding, turn the shredder on using the ON/OFF switch at the rear of the shredder, Return the switch to the auto position

Locking the paper loading door
For additional security, the paper loading door can be locked during the shredding of confidential material.
To lock shredder:

Place documents in-tray. Close paper loading door.
Press any 4 digits. REMEMBER YOUR CODE! Shredder unlocks automatically when:
- 4 digit code is re-entered.
- Shredding is complete.
- Shredder is inactive for 30 minutes (but documents remain in the tray)