LEITZ 65180019 Ergo Cosy Active Stoppad Sits Instruction Manual

June 13, 2024
LEITZ

LEITZ 65180019 Ergo Cosy Active Stoppad Sits

Thank you for choosing Leitz Ergo Cosy
This product is an ergonomic sit & standing stool. It gives you the flexibility to switch between a sitting or standing posture while working at your office or home. This product provides flexibility and comfort while ensuring a secure stand – even on smooth floors.

Product overview

LEITZ-65180019-Ergo-Cosy-Active-Stoppad-Sits-fig-1

  1. Seat
  2. Foot
  3. Rubber surface
  4. Height adjustment buttons
  5. Seat tube

Safety information

CAUTION
Read and understand these instructions, including the technical specifications. This product is designed to be used as a sit & standing stool in an office or home environment. This product is not a toy. Make sure children and pets do not play with the product. Keep all safety information and instructions for future reference. The manufacturer is not liable for cases of material damage or personal injury caused by incorrect installation, handling, or use. The product is intended for use indoors. Do not exceed the maximum loading capacity. Do not lean or stand on the product. Do not eat or drink while using this product. Be wary of cables that can create tripping hazards. Keep the product away from oil, liquids, humidity, or moisture, and do not use it on slippery surfaces (e.g., waxed or polished floors). Do not attempt to open, modify or repair the product. Repairs or work on the height adjustment mechanism shall only be carried out by trained and qualified personnel.

Technical specifications

  • Product codes: 65180019 / 65180061 / 65180089
  • Dimensions: ø341 mm (seat); ø369 mm (foot)
  • Adjustable height: 46 cm – 79 cm
  • Weight: ~7 kg
  • Max. loading capacity: 110 kg

Height adjustment

CAUTION
When the stool is loaded, do not press the height adjustment buttons or adjust the stool height. Failure to do so can lead to injuries and damage to the stool.

  • To increase the height of the stool, pull the seat ① upwards. The stool automatically locks into place when released at the desired height. Make sure the height adjustment is firmly in place.
  • To decrease the height of the stool, simultaneously press and hold the two height adjustment buttons ④. Lower the seat ① and release the two height adjustment buttons at the desired height. Make sure the height adjustment is firmly in place.

Product care

NOTICE
Take care of this product. Regular cleaning and maintenance keep the product working properly and extend its life cycle.

  • Regularly check if the screws that fasten the seat ① and the foot ② to the seat tube ⑤ are firmly tightened. If needed, use a 3mm Allan key to tighten the screws.
  • To clean the chair, wipe with a clean, damp cloth. Do not use wipes or chemicals as these could damage the seat and height adjustment mechanism.

Warranty

Leitz gives you a 5-year guarantee for defects in materials and manufacturing.

  1. Leitz guarantees that if faults arise due to defects in manufacturing and materials during the guarantee period, it will, at its discretion, repair or, if necessary, replace the product free of charge. A guarantee for normal wear and tear is expressly excluded.
  2. Leitz guarantee shall lapse in the following cases:
  • If the product has not been installed and used following these instructions;
  • If the product has been altered or repaired by someone other than Leitz;
  • If a fault arises due to external causes;
  • If the product is used for different uses than intended in this document.

UK Importer ACCO UK Ltd.

  • Oxford House, Oxford Road
  • Buckinghamshire, Aylesbury
  • HP21 8SZ United Kingdom
  • www.leitz.com.

LEITZ ACCO Brands GmbH & Co KG

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals