LEITZ 52790019 Ergo Cosy Seat Ball User Manual
- June 4, 2024
- LEITZ
Table of Contents
LEITZ 52790019 Ergo Cosy Seat Ball User Manual
Thank you for choosing Leitz Ergo Cosy
This product is an inflatable ergonomic sitting and exercise ball. It improves
your sitting posture by activating your back and core muscles. Use it as a
seat while working at your desk or for casual workouts at home. This product
is quick to inflate, easy to carry, and simple to maintain.
Safety information
CAUTION
- Read and understand this manual, including the technical specifications.
- This product is intended to be used as a sitting and a casual exercise ball in an indoor office or home environment.
- This product is not a toy. Make sure children and pets do not play with the product.
- This product is not a chair or a piece of sporting equipment. Do not lean or stand on the product. Never exceed the maximum loading capacity.
- This product is not intended for persons (including children and pregnant women) with restricted physical, sensory or intellectual capability or lack of experience and or knowledge.
- Only use the product with the original, supplied accessories.
- Never inflate the product in a cold environment. Allow the product to warm up before inflation. Make sure to inflate the product at room temperature (19 23°C). Deviations of more than 3°C change the ball pressure and cause dangerous situations.
- Keep the operating area clean and well lit. Cluttered or dark environments can cause accidents and damage the product.
- Do not expose the product to direct sunlight. Keep the product away from oil, liquids, humidity, moisture, sharp objects, and fire. Make sure to place the product at room temperature.
- Make sure that the surface is clean and dry. Do not use the product on sharp, rough, uneven or slippery surfaces (e.g. slate, wooden or waxed, polished floors). Use an (anti-slip) floor mat if necessary.
- Check the wear and sensitivity for light-coloured carpets to ensure that the colour does not rub off. The manufacturer accepts no liability in such cases.
- Check the product for damage before use. If there is any visible damage, do not use the product and contact the manufacturer.
- When sitting down or standing up, make sure to stand firmly on the ground and use the handle to keep the product in place.
- To avoid injuries, make sure to always sit in an upright position and avoid sudden movements and instability. Do not eat or drink while using this product.
- Do not attempt to open, modify or repair the product. Repairs shall be carried out by authorised personnel only.
- Keep all safety information and instructions for future reference. The manufacturer is not liable for material damage or personal injury caused by incorrect handling or use.
Product overview ①
- A. Ball
- B. Sleeve
- C. Hand pump
- D. Plug (2)
- E. Remover
- F. User manual
Set-up and usage
-
Unpack the product and check the contents of the package.
-
Allow the ball Ⓐ to reach room temperature.
-
Put the ball Ⓐ into the sleeve Ⓑ. Make sure the valve on the ball Ⓐ sticks out of the sleeve Ⓑ.
-
Put the hand pump Ⓒ into the valve.
-
Inflate the ball Ⓐ to 80% and insert the plug Ⓓ into the valve.
-
Make sure the valve remains accessible.
-
Allow the ball Ⓐ to rest for 2 hours.
-
Remove the plug Ⓓ from the valve and inflate the ball Ⓐ to 100%.
-
Insert the plug Ⓓ into the valve. Close the zip and make sure there is no tension on it.
-
Sit in an upright position and avoid instability.
-
Do not exceed the maximum loading capacity.
Technical specifications
- Product codes: 52790019, 52790061, 52790089
- Dimensions: ø65 cm
- Circumference: 204 cm
- Weight: 1000g (ball), 560g (sleeve)
- Materials: PVC (ball), Polyester (sleeve), plastic-free packaging
- Available colours: Warm Yellow, Calm Blue and Velvet Grey
- Maximum loading capacity: 100 kg
- Ideal user length: 155-180 cm
Maintenance
To clean the Active Sitting Ball:
- Use the remover Ⓔ to deflate the ball Ⓐ and remove it from the sleeve Ⓑ.
- Hand wash the sleeve Ⓑ at 30°C with similar colours. Wash separately for the first time. Do not use wipes or solvents as these could damage the product.
- Allow the sleeve Ⓑ to dry completely. Do not tumble dry.
- If needed, remove lint from the sleeve Ⓑ with a lint brush.
Warranty
- Leitz gives you a 2-year guarantee for defects in materials and manufacturing.
- Leitz guarantees that when faults arise due to defects in manufacturing and materials during the guarantee period, it will repair or, if necessary, replace the product, free of charge. A guarantee for normal wear and tear is hereby expressly excluded.
- The Leitz guarantee shall lapse in the following cases:
- a. If the product has not been set-up and used in accordance with these instructions;
- b. If the product has been altered or repaired by someone other than Leitz;
- c. If a fault arises due to external causes;
- d. If the product is used for different uses than intended in this document.
- You can find the warranty terms and the contact details of your local customer service on the Leitz website.
Support
UK Importer ACCO UK Ltd. Oxford House, Oxford Road
Buckinghamshire, Aylesbury HP21 8SZ United Kingdom
LEITZ ACCO Brands GmbH & Co KG
Siemensstraße 64
70469 Stuttgart
Germany
www.leitz.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>