legrand 659182 Galaxy Server Instruction Manual

659182 Galaxy Server
Instruction Manual

SERVERS

Large Server (Cat. No: 659182)

Power Button LED Indicator

• Amber – Standby Power
• Blue – Power ON
• OFF – Power OFF

HDD LED

• Flashing during hard drive activity

PWR LED Indicator

• Green – Power ON
• OFF – Power OFF

4 LAN Ports

****| ■ Server Unit (x 1)
■ Antenna (x 2)
■ Mains Power Supply Adapter and Cable – Black (x 1)
■ Connectors – Green (x 3)
■ Mounting Bracket (x 2)
■ Mounting Screws (x 4 pcs)
---|---

Medium Server (Cat. No: 659181) / Small Server (Cat. No: 659180)

Power button LED Indicator

• Blue – Power ON
• OFF – Power OFF

2 LAN Ports (Small Server)

| ■ Server Unit (x 1)
■ Antenna (x 2)
■ Mains Power Supply Adapter and Cable – Black (x 1)
■ Mounting Screws (x 4 pcs)
---|---

STATIONS

Small Station (Cat. No: 659183)

LED 1 – Power

• Red (Blinking) – During system initialization
• Green (Blinking) – During system initialization
• Green – When initialization is complete

LED 2 – Communication

• Red – During system initialization/Communication disconnected
• Green (Blinking) – During communication initialization
• Green – Communication established

LED 3 – Communication traffic

• Red – During initialization
• Green (Blinking) – Indicated data is being received
• Red (Blinking) – Indicated data is being sent

| ■ Station Unit (x 1)
■ Antenna (x 1)
■ Mains Power Supply Cable (x 1)
■ Wall Mounting Bracket with Screws (x 1)
---|---

Large Station (Cat. No: 659185) / Medium Station (Cat. No: 659184)

LED Indications

• Green – Power ON
• Red (Blinking) – During system initialization
• OFF – When initialization is complete

| ■ Station Unit (x 1)
■ Earthing Wire and Glands (x 1)
■ Large Antenna (x 1 Large Station only)
■ Antenna Cable (x 1 Large Station only)
■ Antenna Adapter (x 1 Large Station only)
■ POE Injector with Power Cable (x 1)
■ Wall Mounting Bracket with Screws (x 1)
---|---

Small 4G Station (Cat. No: 659191)

LED 1 – Power

• Red (Blinking) – During system initialization
• Green (Blinking) – During system initialization
• Green – When initialization is complete

LED 2 – Communication

• Red – During system initialization/Communication disconnected
• Green (Blinking) – During communication initialization
• Green – Communication established

LED 3 – Communication traffic

• Red – During initialization
• Green (Blinking) – Indicated data is being received
• Red (Blinking) – Indicated data is being sent

| ■ Station Unit (x 1)
■ Sim Card Slot
■ Antenna (x 1)
■ Mains Power Supply Cable (x 1)
■ Wall Mounting Bracket with Screws (x 1)
■ 1 x Robustel R1510 Industrial Cellular VPN Router
■ 1 x 2-pin (3.5 mm) Male Terminal Block for Power Supply
■ 1 x 3*5 pin (3.5 mm) Male Terminal Block for DIDO
■ 2 x 3G/4G SMA-J Cellular Antenna
■ Ethernet Cable
■ 1x SIM Card Sticker
■ AC/DC 12 V DC Power Adapter
■ Wall Mounting Kit
---|---

4G Router

Ethernet port indicators

LED Indicators

Wireless module: 21-31 dB (High Signal strength)
Green| ON-Blinking| Signal level:
Wireless module: 11-20 dB (Medium Signal strength)
Green| OFF| Signal level:
Wireless module: 1-10 dB (Low Signal strength)
Wi-Fi| Green| ON – Solid| Wi-Fi is enabled and working properly
Green| OFF| Wi-Fi is disabled or not working properly

Note: Click services> Advanced>System>System Settings> Custom LED Light type to set the display type of USR LED.
Reset Button

status.
Restore to factory default settings| Wait for 0-20 secs after powering up the router, and press and hold the RST button until all five LEDs start blinking one by one, and release the button to return the router to factory defaults.

Insert or remove the SIM card as shown in the following steps.
■ Insert SIM card

1. Make sure the router is powered OFF.
2. To insert a SIM card, press the card with your finger until you hear a click.
3. After the SIM card is inserted, attach the SIM card sticker to the card slot.

■ Remove the SIM card

1. Make sure the router is powered OFF.
2. Tear the SIM card sticker from the slot.
3. To remove the SIM card, press the card with a finger until it pops out and then take out the card.

Note:

1. Use the specific M2M SIM card when the device is working in extreme temperatures because the regular card working in a harsh environment for a long time will be disconnected frequently.
2. Do not touch the metal of the card surface in case information on the card will be lost or destroyed.

MOUNTING BRACKETS

Things to consider before/after installation

• Isolate 240 V mains supply before maintenance or installation.
• None of the devices should be switched On/OFF after installation.
• Follow the LED indicator functions.
• Make sure the antenna is pointing vertically upwards (Large station only).
• The antenna should be placed away from the walls and surfaces in order to perform effectively (Large station only).
• Please note that mounting brackets must be installed to achieve optimum performance.
• Secure the stations onto the mounting bracket onto the desired wall or structure before connecting.
• Ensure you have 4G coverage.

Earthing Galaxy Stations and Accessories

Earthing the Medium and Large Stations
The station is provided with a green/yellow cable for earthing. A pre-existing screw hole is available on the metal enclosure of the station, marked with an earth symbol (as shown).

Earthing the Station Mounting Bracket
It is strongly recommended to earth the station mounting bracket to prevent surges that may damage the station.
Earthing can be completed by:

• Pole Mounting: By using metallic strapping.
• Wall Mounting: By using M4 screws (provided). The earthing connection is done through a ring terminal. A specific crimping tool is required to perform the operation. The earthing cable must be crimped inside this ring terminal.

Ethernet Connection

Note: Maximum distance between the POE injector and the station should be < 100 m.

1. Plug the power cord of all units into the power outlet (Do not turn it ON).
2. Connect the Server, POE, and Station to an available ethernet socket outlet. Ensure that the Server and Stations are on the same subnet (local IT may need to assist).
3. Turn ON the power at the outlet and the Server will automatically turn ON.

Note: Contact Legrand prior to installation and for commissioning.
Direct Connection

1. Plug the power cord of all units into the power outlet (Do not turn it ON).

2. Make a direct connection from the Server to the Station using the Legrand yellow Cat 6 cable (Cat. No. 659187).
   Stations are wired back as a star formation to the Server if there is more than one Station on-site. A galaxy LAN extender accessory (Cat. No: 659187) must be used if the distance between the Server and Station exceeds 100 m.

3. Turn ON the power at the outlet and the Server will automatically turn ON.

Note: Contact Legrand prior to installation and for commissioning.

4G Connection

Note: We can have a combination of both wireless and wired connections in one connection. Contact Legrand prior to installation and for commissioning.
GALAXY ACCESSORIES
Ethernet extender kit (Cat. No: 659188)
Application diagram

LED indication

| ON: Power good
---|---
| ON: Link
FLASH: Activity

The green LED may blink quickly while connecting (for extremely long runs, it may take a few seconds to optimize the link).
POE Status (Green)
In normal operation, the LEDs will display the power available in flashing or steady green:

| POE power is available for the station (or another POE-compliant device) in watts.
ON = POE enabled to station
FLASH = POE not enabled, no compliant device detected
---|---

The power level is displayed after the station-side unit has powered up. Available power depends on the cable length, cable gauge, and the POE source used.
Warranty
Legrand Australia Pty Ltd warrants this product for a period of 5 years from the date of purchase.
These goods come with guarantees that cannot be excluded under Australian and New Zealand Consumer Laws. You are entitled to a replacement or a refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Customer Service
For all Customer Service and Technical Support enquires please call Monday to Friday during business hours.
Legrand Australia
1300 369 777
www.legrand.com.au
Legrand New Zealand
0800 476 009
www.legrand.co.nz
ABN: 31 000 102 661

arl.org.au
LE12635AC
06/2022

Documents / Resources

| legrand 659182 Galaxy Server [pdf] Instruction Manual
659182, Galaxy Server, 659182 Galaxy Server, Server
---|---

References

• cat.no
• Home | Legrand
• Home | Legrand

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>