MEARI Mini 7S IP Camera User Guide
- June 5, 2024
- MEARI
Table of Contents
User Guide
What’s in the box
Please consult this checklist for all parts.
Description
| Power | DC5V± 10% |
|---|---|
| Status light | • Red light solid on the camera network is abnormal |
• Blinking red light: awaiting WiFi connecting, or currently connecting
(faster blinking)
• Blue light solid on camera running correctly
• Blinking blue light: awaiting manual WiFi configuration, or currently
connecting (faster blinking)
Microphone| Captures sounds for your video
SD card slot| supports local SD Card storage (Max.128G)
Reset| Press and hold the ‘RESET’ for 5 seconds to reset the device(if faults)
you have modified settings, they will return to factory de Pressing for 1
second will activate manual WiFi setup mode
Install
-
Stick the adhesive tape in the middle of the camera’s bottom
-
Put the camera on the clean plane
Connect
Download
CloudEdge is available for both iOS and Android OS. Research the name
‘CloudEdge’in App Store or Android Market, or scan the upper OR-Code to
download the App.
• Support
https://itunes.apple.com/app/id1294635090?mt=8
https://play.google.com/store/apps/details?id=com.cloudedge.smarteye
Set up router
This product only supports a 2.4GHz frequency band router and does not support
a 5GHz frequency band router, please set the relevant parameters of the router
before WiFi configuration, WiFi passwords do not include special characters
such as -!@#$%^&*(). When the device is configured in WiFi, the mobile phone
and device are as close as to the router, which can speed up the configuration
of the device.
Registration process
Step 1 Open the CloudEdge App, click ‘SIGN UP’, input a valid email
address and select ‘registration means agreement with user agreement privacy
agreement’ then click ‘NEXT’.
Step
2 Enter the email address and click ‘OK’, create a nickname and login
password.
Note: Make sure your router, device, and mobile
phone are nearby.
OR Code Configuration
Few notices before adding the device
- This device only supports a 2.4GHz WiFi router, please make sure you are using a 2.4GHz WiFi router.
- Please follow the instructions and make sure the password is input correctly.
- One device can only be added with one App account, if the device has been added with another account already, then it can’t be added to any other account again.
Process
Step 1 Open the CloudEdge App, click ‘+’, and select the type of device
to add.
Step
2 Please confirm the red LED light blinks, select ‘The device has flashed
red slowly or you hear a tone’, click ‘Next’. Then input the wireless
password, and click ‘Next’.
Step 3
The device is scanning the OR code at a distance of 15-25cm (you can click the
‘operation’ to view the scanning mode). After the device scans successfully,
click ‘Hear tone’.
Step 4 The
device is successfully connected to the network. After the configuration is
completed, the App automatically adds the successfully scanned device and
returns it to the device list. The configuration is completed.
Step 5
Click the play button to complete the preview. (Remind: long-press the image
to be previewed to remove the device, add the device again to reset the
device)
Functions
Video flip
Flip your video stream vertically anytime for maximum flexibility.
Motion detection
Motion sensors will notify you when movement is detected.
Record
Record every moment using high-capacity SD card storage.
Day & Night
Powerful night vision means no interruptions, even in complete darkness.
FAQ
0: The device cannot be previewed properly?
A: Check whether the network is normal, you can place the camera close to the
router, and if not, it is recommended to reset the device and add it again.
Q: Why is it still in the list of devices after resetting?
A: The reset device only resets the network configuration of the camera, but
cannot change the configuration on the App, remove the camera, and must be
deleted by the App.
Q: How to cut the camera network to another router?
A: First remove and reset the device on the App and then configure the device
again by the App.
Q: Why doesn’t the device identify the SD card?
A: It is recommended to plug in an SD card after a power cut. Confirm whether
the SD card is normally available and the format is FAT32. And the TF card
can’t be identified when the internet environment is not good.
Q: Why I can’t get notifications with my cell phone App?
A: Please confirm that the App has been running on the phone, and the relevant
reminder function has been opened; Message notification and authority
confirmation in the mobile phone system has been opened.
Functions
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and installers must be provided with antenna
installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution! Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>