CAT SHIELD Toyota 2022+ Tundra 3.5L Installation Guide
- October 27, 2023
- CAT SHIELD
Table of Contents
CAT SHIELD Toyota 2022+ Tundra 3.5L
Thank you for purchasing the best Tundra converter theft deterrence device on
the market.
Please read the instructions below to ensure the most accurate and secure fit
for your Cat Shield. Professional installation is recommended.
PARTS INCLUDED WITH YOUR CAT SHIELD
TOOLS REQUIRED
- ¼” bit driver
- Protective eyewear
INSTALLATION TIPS
- Torque specs for M8 tamper-proof screws: 68-135 inch lbs.
- Assistance is recommended to hold the shield in place.
- Do not use impact tool or electric drills.
STEP 1
Install the two wings onto the shield. Using the 12 short tamper-proof screws,
install the left and right side wings to the main shield. Refer to image A.
STEP 2
Install the rear end of the shield. Use a stand or partner to hold the shield
in place and install the rear end of the shield first. There are two nut
plates that sit on top of the rear cross member which will lock the rear
shield to the frame (refer to image C). Use the two long tamper-proof screws
to lock the shield to cross member and nut plate. The screw will fasten to the
two innermost holes on the shield (refer to image D). The outer holes are used
in the Hybrid versions only.
STEP 3
Install the front end of the shield. Locate the two threaded holes in the
front cross member and use the two medium length tamper-proof screws to secure
the shield to the vehicle.
STEP 4
Apply Cat Shield sticker (optional). Place the sticker on the vehicle to warn
thieves this vehicle is protected by Cat Shield!
Congratulations! You are now #catshieldprotected. If you have any questions or
feedback about our product, contact us at
info@millercat.com.
Don’t forget to tag us with your latest install using @millercatcorp and
catshieldprotected. Leave us a review and help others get
catshieldprotected!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>