LG SN4R Wireless Sound Bar Owner’s Manual

: June 5, 2024
: LG

Table of Contents

LG SN4R Wireless Sound Bar
WHAT’S IN THE BOX
Front Panel
Rear Panel
Subwoofer Connection
TV Connection
Remote control
Specification
Declaration of Conformity
Documents / Resources

LG SN4R Wireless Sound Bar

LG-SN4R-Wireless-Sound-Bar-
product

WHAT’S IN THE BOX

LG-SN4R-Wireless-Sound-Bar-fig-1

Front Panel

LG-SN4R-Wireless-Sound-Bar-fig-2

Rear Panel

LG-SN4R-Wireless-Sound-Bar-fig-3

DC IN Connect to the AC adapter.
OPTICAL IN · Connect to an optical device.
HDMI IN · Connect to device with HDMI OUT.
HDMI OUT (TV ARC) Connect to a TV.
USB Port · Connect to a USB device.

Subwoofer Connection

Place the wireless subwoofer near the sound bar and follow steps below.

Connect the power cord of the sound bar and the wireless subwoofer to the outlet.
Turn on the sound bar.
- The sound bar and wireless subwoofer will be automatically connected. The subwoofer’s yellow-green LED turns on.

Manual Subwoofer Connection

If the subwoofer does not make sound, try to connect manually.
Press PAIRING on the rear of the wireless subwoofer. The yellow-green LED on the front of the wireless subwoofer blinks quickly. (If the yellow-green LED does not blink, press and hold the PAIRING.)
Turn on the soundbar.
Pairing is completed. The yellow-green LED on the front of the wireless subwoofer turns on.

NOTE:
Keep the sound bar and the subwoofer away from the device (ex. wireless router, microwave oven, etc.) over 1 m to prevent wireless interference.

TV Connection

Connect the sound bar and TV using Optical ( A) or HDMI ARC (B ).

Optical Connection

Connect the sound bar to the TV using Optical cable.
Set up [External Speaker (Optical)] on your TV setting menu.

HDMI (ARC) Connection

Connect the sound bar to the TV using HDMI cable.
Set up [External Speaker (HDMI ARC)] on your TV setting menu.

Additional Device Connection

Connect to the external device like as follow.
Set the input source by pressing F repeatedly.

Remote control

LG-SN4R-Wireless-Sound-Bar-fig-7

Specification

__

Power consumption

| Refer to the main label.
---|---
Networked standby : 1.0 W

(If all network ports are activated.)

__

AC adapter

| • Model : DA-38A25

• Manufacturer : Asian Power Devices Inc.

• Input : 100 – 240 V ~ 50 – 60 Hz

• Output : 25 V 0 1.52 A

• Model : MS-Z1520R250- 038A0-P

• Manufacturer : MOSO POWER SUPPLY TECHNOLOGY CO., LTD.

• Input : 100 – 240 V ~ 50/60 Hz

• Output : 25 V 0 1.52 A

Dimensions (W x H x D)| Approx.

890.0 mm X 57.0 mm X

85.0 mm With foot

Bus Power Supply (USB)| __

5 V 0 500 mA

Amplifier (Total RMS Output power)| __

420 W RMS

Rear Surround sound

Wireless Rear Speakers Kit included for real surround sound. (SPJ4-S)

How to disconnect the wireless network connection or the wireless device

Set up the AUTO POWER ON/OFF function to off and turn off the unit.

OPEN-SOURCE SOFTWARE NOTICE INFORMATION

To obtain the source code under GPL, LGPL, MPL, and other open-source licenses, that is contained in this product, please visit http://opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is valid for a period of three years after our last shipment of this product. This offer is valid to anyone in receipt of this information.

Declaration of Conformity

Hereby, LG Electronics declares that the radio equipment type Wireless Sound Bar is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.lg.com/global/support/cedoc/cedoc# For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.