Sailstar 2 Light Bathroom Vanity Light User Manual
- June 14, 2024
- Sailstar
Table of Contents
User Manual of 2-Light Vanity Light Fixture
Product Information
Type: 2-Light Bathroom Light
Voltage: AC 120V 60HZ
Wattage: 60W Maximum
Base: Standard E26 socket
Bulbs are not included
Package Included
1xVanity Light Fixture 2xGlass Lampshades
2xSocket Rings 1xMounting Plate
2xScrew Nuts 3xWire Nuts
2xScrews
Tools Recommended Please consult a qualified electrician if you are not sure how to install.**
Installation Method
Disconnect power before Installation.
[1]
Separate the mounting plate from the fixture by unscrewing the screw nuts.
[2]
Tighten the mounting plate to the junction box by screwing the included screws.
[3]
Connect the wires correctly and secure them with electrical tape and wire nuts. (White to white and black to black, with the copper wire attaching to the mounting plate)
[4]
Install the light fixture by locking the screw nuts.
[5]
Install the glass lampshade in the lamp holder and fix it by rotating the socket ring. Then screw the light bulb into the E26 socket. (Bulbs are not included)
[6]
Connect the power and turn on the light when installation finished.
Safety Warnings
- Please disconnect the power before installation.
- Please install in strict accordance with the instructions.
- Please don’t use a power supply that exceeds the rated voltage range.
- Please contact us for replacement if there are any quality issues during warranty.
How to contact us on Amazon?
Find the product pages and clicks sold by “Sailstar,” and ask a question. See the below screenshot. Our bathroom lights provide two years replacement promised.
(1)
(2)
Have a question for Sailstar?
Documents / Resources
|
Sailstar 2 Light Bathroom Vanity
Light
[pdf] User Manual
2 Light Bathroom Vanity Light, 2 Light, Bathroom Vanity Light, Vanity Light
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>