Hydraulic Excavator 330 User Manual

: June 2, 2024
: CAT

User Manual

Hydraulic Excavator 330 Image

Hydraulic Excavator 330

Technical Specifications

Configurations and features may vary by region. Please consult your Cat® dealer for availability in your area.

Specifications

Engine

FIG 1 Engine

Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Recommended for use up to 4500 m (14,760 ft) altitude with engine power derate above 3000 m (9,840 ft).
Net power is tested per ISO 9249. Standards in effect at the time of manufacture.
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Rated speed at 2,200 rpm.

Swing Mechanism

FIG 2 Swing Mechanism

Weights

FIG 3 Weights

Track

FIG 4 Track

Drive

FIG 5 Drive

Hydraulic System

FIG 6 Hydraulic System

Service Refill Capacities

FIG 7 Service Refill Capacities

Standards

FIG 8 Standards

Sound Performance

FIG 9 Sound Performance

Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/ windows open) for extended periods or in a noisy environment.

Operating Weights and Ground Pressures

FIG 10 Operating Weights and Ground Pressures

Major Component Weights

FIG 11 Major Component Weights

Dimensions

All dimensions are approximate and may vary depending on bucket selection.

FIG 12 Dimensions

FIG 13 Dimensions

FIG 14 Dimensions

Working Ranges and Forces

All dimensions are approximate and may vary depending on bucket selection.

FIG 15 Working Ranges and Forces

FIG 16 Working Ranges and Forces

Reach Boom Lift Capacities – Counterweight: 6700 kg (14,770 lb) – without Bucket, Heavy Lift: On

FIG 17 Reach Boom Lift Capacities

Reach Boom Lift Capacities – Counterweight: 6700 kg (14,770 lb) – without Bucket, Heavy Lift: On.

FIG 18 Reach Boom Lift Capacities

Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.

Reach Boom Lift Capacities – Counterweight: 6700 kg (14,770 lb) – without Bucket, Heavy Lift: On

FIG 19 Reach Boom Lift Capacities

Reach Boom Lift Capacities – Counterweight: 6700 kg (14,770 lb) – without Bucket, Heavy Lift: On

FIG 20 Reach Boom Lift Capacities

Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based
on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.

Reach Boom Lift Capacities – Counterweight: 6700 kg (14,770 lb) – without Bucket, Heavy Lift: On

FIG 21 Reach Boom Lift Capacities

Reach Boom Lift Capacities – Counterweight: 6700 kg (14,770 lb) – without Bucket, Heavy Lift: On

FIG 22 Reach Boom Lift Capacities

Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity standard ISO 10567:2007.

They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the above lifting capacities. Lifting capacities are based
on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.

Lift capacity stays with ±5% for all available track shoes.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.

Bucket Specifications and Compatibility

FIG 23 Bucket Specifications and Compatibility

FIG 24 Bucket Specifications and Compatibility

Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are outside of Caterpillar’s
recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including but not limited to reductions in production, stability,
reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or catching of heavy loads will reduce the life of the boom and stick.

Attachments Offering Guide

Not all Attachments are available in all regions. Consult your Cat dealer for configurations available in your region.

FIG 25 Attachments Offering Guide

FIG 26 Attachments Offering Guide

FIG 27 Attachments Offering Guide

Standard and Optional Equipment

Standard and optional equipment may vary. Consult your Cat dealer for details.

FIG 28 Standard and Optional Equipment

FIG 29 Standard and Optional Equipment

FIG 30 Standard and Optional Equipment

FIG 31 Standard and Optional Equipment

FIG 32 Standard and Optional Equipment

FIG 33 Standard and Optional Equipment

FIG 34 Standard and Optional Equipment

FIG 35 Standard and Optional Equipment

FIG 36 Standard and Optional Equipment

FIG 37 Standard and Optional Equipment

Dealer Installed Kits and Attachments

Attachments may vary. Consult your Cat dealer for details.

CAB

RH electrical pedal (two-way) for tool control
Radial lower wiper for two piece (70/30) windshield, with washer
Rain protector plus cab light cover

SAFETY AND SECURITY

75 mm (3″) retractable seat belt
Bluetooth key fob

GUARDS

Side rubber bumper guard
Falling object guard system (not compatible with cab light cover, rain protector)
Mesh guard full front (not compatible with cab light cover, rain protector)
Full protecting vandalism guard (not compatible with cab light cover, rain protector)

ELECTRICAL

Jump start wiring

SERVICE AND MAINTENANCE

Grease gun holder

For more complete information on Cat products, dealer services, and industry solutions, visit us on the web at www.cat.com

Materials and specifications are subject to change without notice. Featured machines in photos may include additional equipment. See your Cat dealer for available options.

CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, “Caterpillar Corporate Yellow,” the “Power Edge” and Cat “Modern Hex” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.

AEXJ0085-03 (08-2020)
Replaces AEXJ0085-02
Build Number: 07C
(ANZ)

Read More About This Manual & Download PDF:

Hydraulic Excavator 330 User Manual – Optimized PDF
Hydraulic Excavator 330 User Manual – Original PDF

Questions about your Manual? Post in the comments!