Baseus Encok True Wireless Earphones W05 Instructions
- June 5, 2024
- Baseus
Table of Contents
Baseus Encok True Wireless Earphones W05
Product Parameters
- Name:BaseusEncokTrueWirelessEarphones
- Mode! No.: Baseus Encok WOS
- Material: ABS+PC
- Version:VS.0
- Standbytin1€:300hours
- Music time: 4 hours (volume set to 70%) Music time with a charging case: 25- 30 hours Battery capacity: 400mAh/1.48Wh (charging case) 30mAh/0.11 1Wh (earphones) Earphonerated
- input:DC5V-30mA
- Earphonerated cons.umptioncurrent:l OmA
- Charging case rated input: DCSV-400mA
- Charging case rated consumption current: 80 mA
- Charging time: About 1.5 hours Wireless charging time: about2 hours
- Frequency response range: 20Hz-20KHz
- Chargeport:Type-C
- Suitable for: Compatible with all wireless devices
Packing List
Product Diagram
Music mode
Call mode
Product Operating Method
initial use
Pleasetearoffthe insulating sticker on the earphone and then put it in the
charging case
Important notice
- In-ear Wearing Detection Check the status of wearing earphones. When users take off either earphone, music will stop playing and when users wear both earphones again, music will resume playing
- Pairing time In pairing mode, the earphones will automatically turn off if the disconnection lasts for more than 5 minutes.
- Restore factory settings Open the lid of the charging case (within 10 seconds), and long-press the left and right earphones for 7 seconds. When the white light flashes, it means restoration of factory default settings is completed.
Declaration on toxic or hazardous substances and elements contained in
electronic products
This form is prepared in accordance with SJ/T 11364 regulations. O: Indicates that contents of the toxic and hazardous substances in all homogeneous materials are below the limit requirements specified by GB/T 26572 standard. X: Indicates that contents of the toxic and hazardous substances exceed the limit requirements specified by GB/T 26572 standard in at least one homogeneous material of the component. Please note: The 5-year icon refers to the “valid environment-friendly use period”, not the product quality assurance period. Electronic products contain toxic and harmful substances such as lead, mercury and cadmium. The overdue use of these products may lead to leakage or mutation of these toxic and harmful substances, cause environment pollution or serious damage to people and property. The term of “environment-friendly use period” means that all electronic products shall be used within this validity period. We are free of any responsibility against safety issues caused by using the product beyond its safe service life.
Product Safety Information
Please read all instructions and warnings carefully before using this product. Improper use may cause damage to the product. Do not store the product in high temperature, strong light and strong magnetic field. Do not place it in other harsh environments such as fire source. If water enters, dry it naturally and use it again. Improper use ot the product may cause damage to the product itselt or may endanger personal and property safety. Consumer shall be liable for any personal and property damage resulted from their improper use against the user manual or ignoring the warning, to which our company will not bear any legal liability. Disintegration of this product by non-professionals is strictly prohibited. Use of household appliances or loads in excess of the output current of this product shall be avoided (no output due to circuit protection). Intense physical actions including knocking, throwing, trampling on and squeezing, etc. shall be avoided.
FAQS
Why my product cannot be turned on/off?
- Make sure that the charging case and the earphones have battery left, take out the earphones from the charging case, and the earphones will automatically turn on;
- Make sure that the charging case and the earphones have battery left, put the earphones back in the charging case, and the earphones will automatically turn off,
- When the charging case is out of battery, please turn off the wireless function on your phone and the earphones will turn off automatically in 5 minutes;
- Keep the charging area of the earphones and Pogo pin of the charging case clean, and regularly clean them with dry cloth.
Why is the in-ear wearing detection insensitive or too sensitive?
- Make sure that the contact area of the earphones is clean and water-free;
- Make sure that the fingers to touch the earphones are without water or other foreign objects;
- If it is unable to connect after the above operation, please turn off the Wireless of other mobile phones close to the mobile phone and restore tactory settings before connecting.
Why can’t my product connect to the wireless device again?
- The earphones will be disconnected if they are out of the connection range of 15 meters. The earphones will automatically shut down if they are not back to the connection range within 5 minutes
- If the earphones tail to connect to the wireless device again within 5 minutes, please put the earphones into the charging case and close the lid, and then take them out.
Why is one ot my earphones without sound ater I take them out?
- If this problem occurs, please put the earphones into the charging case and close the lid, and then take them out;
- It it is unable to connect after the above operation, please turn off the Wireless of other mobile phones close to the mobile phone arnd restore factory settings before connecting.
It is not working when double-tapping the earphone functions?
- In order to avoid accidental touches, we made a special design for tapping, which is only supported after the earphone is put into the ear for 3 seconds. And then touch for different human body has a different sensitivity, sometimes there will be touch insensitive phenomenon, which is normal.
The mobile phone cannot find the wireless headphone, the Wireless connection is unstable or disconnected during use, thus resulting in unsmooth sound/interruption?
- Please do not exceed the Wireless Connection distance of the mobile phone, so as to avoid interference from the wall or the human body
- Please make sure the earphone has enough power, and re-enter the pairing mode to connect,
- If it is unable to connect after the above operation, please turn off the Wireless of other mobile phones close to the mobile phone and restore factory settings before connecting:
- Due to the property of the Wireless earphone, the electromagnetic waves in your area may interfere with the Wireless connection, resulting in sound problem or disconnection, please stay away from such areas before connecting.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>