TRIPP-LITE U442-DOCK11-S USB 3.2 Gen1 USB-C Aluminum Docking Station with PD Charging Owner’s Manual

TRIPP-LITE U442-DOCK11-S USB 3.2 Gen1 USB-C Aluminum Docking Station with

PD Charging

Package Contents

• U442-DOCK11-S
•  Owner’s Manual

Optional Accessories

• N201-Series Cat6 Gigabit Snagless Patch Cables
•  P566-Series HDMI to DVI Adapter Cables
•  P569-XXX-CERT* Series High Speed HDMI Cables
•  U322-Series USB A/B Device Cables
•  U326-Series USB Micro-B Device Cables
•  U420-003-G2-5A USB 3.2 Gen 2 (10 Gbps) USB-C M/M Cable with 5A rating, 3 ft.
•  U428-003 USB 3.2 Gen 1 (5 Gbps) Cable, USB-C to USB-A M/M, 3 ft.

System Requirements

• Computer with USB-C® port that supports USB DisplayPort Alternate Mode
•  DVI* or HDMI monitor
•  Ethernet network with speeds up to 10/100/1000 Mbps

Product Features

• Supports USB DisplayPort Alternate Mode for connecting an HDMI monitor
•  Supports connection of a DVI monitor
• (HDMI to DVI adapter required, sold separately)
•  HDMI port supports 4K UHD video resolutions up to 3840 x 2160 @ 30 Hz
•  Ethernet port supports true 10/100/1000 Mbps network speeds
•  USB-A hub ports support data transfer rates up to 5 Gbps
•  Micro SD and SD/MMC memory card slots provide external memory access
•  USB-C port supports USB 3.2 Gen1 data transfer rates up to 5Gbps, and power input up to 20V 3A (60W)
•  Automatically resumes operation from hibernation and suspend modes
•  Complies with IEEE 802.3az
• (Energy Efficient Ethernet)
•  Supports full- and half-duplex operations
• Supports IPv4 and IPv6 pack Checksum Offload Engine (COE) to reduce CPU loading
•  Supports Wake-on-LAN
•  Plug and play—no software, drivers or external power supply required

Product Overview

• USB-C Connector with Built-In Cable}
• USB-A Ports
• Micro SD Memory Card Slot
• SD/MMC Memory Card Slot
• RJ45 Ethernet Network Port
• 4K HDMI Port
• USB-C Data/Charging Port
• (Optional) 5V DC Power Jack

Installation

• Both memory card slots can be used at the same time.
•  When connected to an AC power source by way of the USB-C charging port, 5W is dedicated to the docking station and connected USB peripherals. The remaining power is used to charge the connected USB-C device.
•  See Optional Accessories section for suggested cables.
•  When the unit is connected to the USB-C port on your computer and to a network via Cat5e/6 cabling, a network connection will automatically be established. If no connection is made, one can be established manually by going to your computer’s network settings page. For example, when using a Mac, navigate to the Network section found in System Preferences, click the ‘Assist Me’ button to get to the Network Setup Assistant, then follow the prompts to establish a connection.
•  If additional power is required for your installation, the U442-DOCK11-S is compatible with user-supplied 5V DC power jacks equipped with a 3.5 x 1.35 x 9.5 mm output plug with a positive tip and negative sleeve.
• Connect the built-in USB-C cable to USB-C port on your laptop, tablet or other device.
•  Use an HDMI cable to connect a monitor or display to the unit’s HDMI port.
•  Connect USB peripherals to the unit’s USB-A hub ports.
•  For an Ethernet connection, use Cat5e/6 UTP cable to connect to the unit’s RJ45 port.
•  Insert Micro SD or SD/MMC cards into their corresponding slots to access external memory.
•  Charge a device by connecting a USB-C charger to the unit’s USB-C port. The USB-C port can also be used to connect a USB-C peripheral device.

Specifications

Input Connectors

USB| 1x USB-C (Male)
DC Port| DC Power (Female)
Output Connectors
USB-A| 2x USB-A (Female)
USB-C| 1x USB-C (Female)
HDMI| 1x HDMI (Female)
Memory Cards| 1x Micro SD, 1x SD/MMC
Ethernet| 1x RJ45
Environmental
Operating Temperature| 32° to 131°F (0° to 55°C)
Operating Humidity| 10% to 85% RH,

Non-Condensing

Storage Temperature| 14° to 158°F (-10° to 70°C)
Storage Humidity| 5% to 90% RH, Non-Condensing
Power Requirements
USB-C Charging Port| Supports up to 20V 3A (60W) Input*
DC Port| 5V 2A

Warranty and Product Registration

3-Year Limited Warranty
Tripp Lite warrants its products to be free from defects in materials and workmanship for a period of three (3) years from the date of initial purchase. Tripp Lite’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from Tripp Lite or an authorized Tripp Lite service center. Products must be returned to Tripp Lite or an authorized Tripp Lite service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment, which has been damaged by accident, negligence or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, Tripp Lite MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL Tripp Lite BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, Tripp Lite is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise. Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the user’s authority to operate this equipment.

Product Registration
Visit tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

• No purchase necessary. Void where prohibited. Some restrictions apply. See website for details

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
•  Send the new equipment back for recycling when this ultimately becomes waste

Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice. Photos and illustrations may differ slightly from actual products.

FCC Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

•  This device may not cause harmful interference,
•  this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>