tuya V30 Low Consumption Smart Wireless Doorbell User Guide

tuya V30 Low Consumption Smart Wireless Doorbell

Package List

Please check and make sure the camera (here in after refemed to as The Equipment”) is in good condition and all below parts are incjuded after opened the package.

Appearance Introduction

IR LED The infrared light will turn on automatically when the ambient light is Insufficient
Light Sensor It’s used to collect ambient light values when the luminance is lower than 2Lux, infrared light will be enabled automatically.
PIR When human body moved in front of the equipment, the equipment will make notification to your mobile phone
Radar When the human body moves in front of the device, the radar generates a trigger signal to the mobile phone
Lens Video image capture
Indicator Light Blue light flashes– Pairing Status Red light on Failed WIFI Connection Blue light on- Connected Suooessfully Red& Blue light on together- Connecting WI-Fi
MIC To gather the environmental sounds and realize voice-voice intercorn.
Speaker System sound and voice intercom
Mounting Use bracket mounting screws to mount the
bracket holes racket to the wall

Installation Guide

Please take out the bracket from the equipment as shown in the figure

1. Install the base on the wall using the mounting screw in the accessory package
2. Align the mounting bracket holes of the machine with the base screws for installation
3. Toggle the power ON / OFF to turn the camera on or off
4. Micro USB interface
5. Garden light output port
6. Solar charging output port
7. Press the reset button for 5 seconds, waiting for the indicator light turn to red slow flash (The equipment should be in working condition, long press, sleep state is invalid)
8. TF card slot, install TF card 6 for video storage

Buzzer Matching Space (this device needs to be purchased separately) Matching: Press and hold the buzzer volume key for4 seconds,The LED Light will turn ON. Next, press the doorbell button for 5 seconds. When the buzzer LEDblinks quickly, the matching is complete. Reset: Press and hold the buzzer volume key for 10 seconds. The matching will reset.

Device Connection

Thanks for choosing our product. Please scan the following QR code to install the app on your phone, then set your device by following the steps after it’s done. App Installation Scan the QR codes below or Seach “TuyaSmart” from App Stroe(for iOS devices)/Google Play Store (for Android smartphones) to download and install the App.

Set up your video doorbell in the

TuyaSmart App

Step1 Download TuyaSmart app Scan QR code below.or search for “Tuya Smart”on Apple app store or Google Play

Step 2 Open the TuyaSmart app. Register your email or phone number and Login to your account
Step 3 To add your doorbell. sekct the at top right of home page Then select Smart Doorbell

Step 4 Open the battery cover and remove the insubtion tabs. When you hear Thecamera is now ready to begin pairing and the LEDlght is flashing blue quickly tap Next step

Step 5 ACFind the name of your Wi-fi network Enter your W-Fi password, then tap Confim

Step 6 rebel o th G and your mobile-phone Ahr
Step 7 Onne reoesconected 1o our Bp Ocre Supis come e tay ard go the e preview
NOTICE: Be sure to tum on push notifications on your phone

1. Navigate to Settings NotificationsON
2. AIst of apps that support push notifications will appear
3. . Tep the TuyalSmart app and enable the notification

Technical Specification

FAQ

Q: How do I reset the doorbel?
A Press and hokl the RESET Button for 6 seconds
Q : How do Ishare the video doorbell with my family?
A : From the home page, tap the doorbell to live view.

1.  Tap the settings’ icon in the top right corner.
2.  Seet Share Device

Add sharing and enter the account name you want share to. Or you can follow the in-app instructions to do family settings
Q: How do l adjust PlR motion detection sensitivity?

1. From the home page. tap the doorbell to [ive view.
2. 1ap the settings icon in the top nignt corner.
3. Select PIR
   Options for PIR Motion Sensitivity High: Records and notifies you about every motion. Shortest battery life Medium: Records and notifies you about motionless often. Standard battery life. Low: Records and notifies you about motion even less often. Maximum battery life.

Q:How many users can view the video at the same time?
A : Up to4 Users may view the video feed. Both iOS and Android are compatible.
Q:s 5CHz WiFi supported?
A 5CHz WiFi is supported.
Q: My signal is poor on my doorbel.
A : Your doorbell may be too far away from your wireless router or you may haveSome some obstructions in between that reduce signal strength. You might try repositioning your router or getting a signal extender/repeater for your Wireess rOuter.
Q:this device only battery powered?
A Yes, its only battery-powered. No wires are needed.
Q: Canl use Tuya Smart Life app for the doorbel?
A :Yes. you can use both Tuya Smart Lite and Denver Smart Home.

Introduction to Functions

• LONG BATTERY LIFE:The capacity of the 18650 battery is 2600mAh, which oquatos to 6 months of battery life HD
• HIGH DEFINITION: Mlion High Definition Pixels within the Ultra-Thin 1.7MM Lens
• ANYWHERE ANYTIME: Remote Cll phone activation(via the app)is supported
• Wi-Fi connection supported
• Clear two-way speaking
• PIR Supported.When someone is wandering out- doors, waming information is immediately sent to the connected cell phone via the app
• Automatic switching between Day/Night mode,with clear pictures to safeguard you and your family members
  Tip : There wil be no further notification of any change of the above functions. Please take the actual object as the standard.Thanks!
  NOTE Please choose the correct 18650 battery to use with the smart doorbell!

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference radio communications. However, there is no guarantee that interference will not occur in : radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the particular installation. If this equipment does cause harmful interference to receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>