STarway A001-XXX Baracca Stage Light User Manual

user manual
Version 05062023 V1.0.1 www.star-way.com

Technical specifications:

• Source: 260W White Laser – 7800°K
  • Illumination @ 20 m: 462000 Lux
  • Luminous Flux max.: 7900 Lumens
  • Optic: 0.8°
  • Lens: Ø 222mm
  • DMX: 22/30 Ch
  • Mode: Statique, Auto, DMX
  • Consumption max.: 370W (@230V)
  • Dimensions: 429 x 319 x 709 mm
  • Weight: 39 kg
  • IP65
  • Starting temperature: – 20°C / + 45°C
  • Operation temperature: – 40°C / + 45°C

Introduction:

With its exceptional opening angle of 0.8° and its 260 W laser source,BARACCA reinvents the automatic Beam. Equipped with an impressive 222 mm lens and capable of delivering 462,000 lux at 20 meters, it produces a beam that is extremely present in space at equally extreme distances. To express all your creativity, it integrates, in an IP aluminum housing, a CYM color system, a 17 color wheel, a 19 fixed gobo wheel and 4 prisms (8, 16, 6 linear, 24 facets) as well as a 6 colors split effect and a frost.

DIMENSIONS

ILLUMINANCE

READ CAREFULLY THIS INSTRUCTION MANUAL
KEEP IT WITH CURE BEFORE CARRYING OUT ANY OPERATIONS WITH THE UNIT, FOR FUTURE REFERENCE. before installing, operating or maintaining this device, follow carefully directions of this instruction manual.
– WARNING! RISK OF FIRE –
MAINTAIN A MINIMUM DISTANCE OF 30M BETWEEN THE BEAM AND A FLAMMABLE SURFACE.

Be careful photo-Biological risk!
attention!!
professional lighting system do not look at the luminous fluX in the aXis.

SAFETY

• Warnings and installation precautions
• Never use the fixture in places with an ambient temperature of over 45° C (113° F), in places subject to vibrations or bumps;
• Mount the projector so that it remains stable at all times;
• Never let the power cord come into contact with other cables;
• Handle the power cord and all connections with the mains with particular caution!
• Do not insert objects into air vents.
• Do not open the device and do not modify the device: Risk of electric shock!
• Do not connect this device to a dimmer pack.
• Do not switch the device on and off in short intervals, as this will reduce the device’s life.
• This device needs to connect the yellow/green conductor to earth. Never use anything to cover the ground contact.
• Only operate the device after having familiarized with its functions.
• Avoid flames and do not put close to flammable liquids or gases.
• Always allow a free air space of at least 80 cm (30 in.) around the unit for ventilation.
• Always disconnect power from the mains when device is not used or before cleaning!
• Only handle the power cord holding it by the plug.
• Make sure that the power cord is never crimped or damaged. Check the device and the power cord from time to time.
• If device was dropped or struck, disconnect mains power supply immediately. Have a qualified engineer inspect for safety before operating.
• If the device has been exposed to drastic temperature fluctuation (e.g. after transpor- tation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
• If your device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material) and return it to your dealer for service.
• For adult use only. The device must be installed beyond the reach of children.
• Never leave the unit running unattended.

Regulations
The products referred in this manual complies with the European Community directives and are there-fore marked with CE, ROHS, R&TTE.
Recycling
If the unit is to be put out of operation definitively, take it to a local recycling plan for a disposal which is not harmful to the environment.
Cleaning
Regularly clean the lens with a clean microfiber cloth.
The use of compressed air facilitates the cleaning of the case.
Warranty applicable in European Community
The manufacturer has designed and manufactured this product to give you complete satisfaction.
Nevertheless, if it appears that your product was defective, you benefit from a commercial guarantee of 24 months from the date of purchase.
To benefit from this guarantee, the user must return the product to the distributor, accompanied by the purchase invoice and by the serial number.
This warranty, applicable in European Community, covers all product defects that do not allow normal use of the product. It does not cover defects related to poor maintenance, improper use, foreseeable wear or if the manufacturer’s recommendations have not been followed. The warranty does not cover normal wear and tear of parts related to the use of the product, such as battery, lamp, wheels, wear parts, etc. Given the defect and the part concerned, the guarantor will then decide to proceed repair or replacement of said part.

The guarantor is:
CSI Audiovisuel – 22 rue Edouard Buffard, 77144 Montevrain – France +33 148 632 211
The period for supplying spare parts under warranty is two years.
Rigging
This device is heavy. When handling, use a two-person lift to prevent injury.
Please follow the European and national guidelines concerning rigging, trussing and all other safety issues.

RISK GROUP 2
NEVER LOOK DIRECTLY AT LIGHT SOURCES BLUE LIGHT RISK GROUP 2

The manufacturer cannot be held responsible for damage caused by failure to follow the safety, installation or assembly instructions contained in this manual, or by any modification to this appliance.
The light source of this projector consists of laser diodes, which comply with the corresponding safety standard and are classified as follows:
Class 1 Laser Product (IEC60825-1:2014) —- RG2 (IEC 62471:2006)
It is prohibited to transfer the laser projectors to another person in the context of a purchase, rental or loan, unless this person can prove that he is capable of setting up laser shows.
Direct exposure to the laser beam is also prohibited. Users must control access to the laser beam in an area where it is hazardous or install the projector (ZD) at a height that avoids any exposure of people to this beam in this area.

DMX connection:

The projectors are connected in series to a DMX console.
Connect the projectors as shown in the diagram above.

• Connect the male side of the DMX cable to the output of the DMX512 console.
• Then connect the DMX output of the projector to the input of the next projector.
• Repeat the operation on the whole chain.

The use of a termination plug is strongly recommended. In some cases the absence of this termination is not problematic, on the other hand its presence is very strongly recommended in disturbed spaces (Stage, long line length, TV studio etc.). Its value is generally 120 Ohms. The plug is an XLR male plug into which a resistance of 120 Ohms ¼ of W. is welded between 2 and 3. This plug prevents the reflection of information transmitted when using long lengths of cable.

MENU

THE VALUES IN RED ARE DEFINED BY DEFAULT IN THE MENU AND RELOADED AS IN THE CASE OF «RELOAD DEFAULT SETTINGS»

DISPLAY SCREEN| Software Update Please Wait… StarWay Baracca
Fixture Check Motor Reset Please Wait…
---|---
SET| Set Address| A001-XXX| | |
User Mode| Standard| 22 CH| | |
Extended| 30 CH| | |
Wireless Settings| W-DMX| ON / OFF| | |
Operating Mode| Receiver / Transmitter| | |
Transmit mode| G3 / G4S| | |
Link| Link / Unlink| | |
Receive Reset| NO / YES| | |
FUNCTION| Status| No DMX Mode| Black/Hold/Auto|
P.Reverse| ON/OFF|
T. Reverse| ON/OFF|
Pan Degree| 630/540|
Feedback| ON/OFF|
Move.Speed| Speed 1~ 4 (Fast>Slow)|
Hibernation| OFF, 01M~99M – 15M
Dim Mode| Standard Stage
TV
Architectural Theatre| A descent time is automatically applied to the dimmer in stage, TV, Architectural and theater modes,
Temp. C/F| Celsius| °C /°F
Fahrenheit
Dim Curve| Linear/Square/Inverse Square/S-Curve
Frequency| 900HZ/1000HZ/1100HZ/1200HZ/1300HZ/1400HZ/15 00HZ/ 2500HZ/4000HZ/5000HZ/10KHZ/15KHZ/20KHZ/25KHZ
Fan.Set| Head Fan| Auto High Silent
Base Fan| Auto
High
Silent
FUNCTION| LCD.Set| Backlight| 01~60m <01m>
---|---|---|---
Flip Display| ON/OFF
Key Lock| ON/OFF
DispFlash| ON/OFF
Disp.Set| Chan.Value| PAN……
Slave Set| Slave1,Slave2
Auto.Prog| Master / Alone
DFSE| ON/OFF| Factory reset
USB Update| ON/OFF| USB activation for software update
INFORMA- TION| Time.Info| Current| – Operating time since switching on,
Total Time| – Total Operating time
Last Clear| – Time since the reset of the counter
Timer PIN| – Counter deletion code. (Code = 050)
Clear Last| ON/OFF       Counter Reset
Temp. Info| Head xxxF/C
Base xxxF/C
Fan Speed| Head-1:xxxxRPM
Head-2:xxxxRPM
Base-1:xxxxRPM
Base-2:xxxxRPM
Error. Info| NONE,Pan,Tilt …..
Model. Info| Baracca
Software.V| 1U:V1.0.X
2U:V1.0.X
3U:V1.0.X
TEST| Reset. Motor| A11/Pan&Tilt/Head
Test.Channel| PAN; TILT; etc …..| Self test of each function
Panel.Ctrl.| PAN =XXX; Tilt =XXX; etc ….| Manual adjustment of each function
Calibrate| -Password-| | Code = 050

SET MENU
Address set:
Baracca DMX address configuration
User Mode:
Selection of the Baracca DMX mode between the different modes such as:

• Standard 22 DMX channels – 16-bit mode
• Extended 30 DMX Channels – Extended 16-Bit Mode

Wireless Settings
W-DMX
Sub-menu allowing the activation or deactivation of the Wireless Solution module
Operating Mode
Sub-menu to select the mode of the Wireless Solution module, either Receiver or Transmitter mode.
Transmit Mode:
Sub-menu to select the transmission mode of the Wireless Solution module, either in G3 mode (Legacy mode) or in G4S mode
Link:
Sub-menu for pairing (Link) or unpairing (Unlink) projectors / receivers when Baracca is in Transmitter mode
Receive Reset:
Sub-menu for unpairing Baracca and placing it in “waiting for pairing” mode when it is in Receiver mode.
FUNCTION MENU
Status
In this submenu it is possible to modify the Baracca behavior.
No DMX Mode
Modification of Baracca reaction during DMX signal loss:

• Hold: maintenance of the last DMX values received
• Auto: The Baracca goes into Auto mode
• Black Out: Baracca goes into “Stand By” mode

P Reverse: ON / OFF – Pan inversion
T Reverse: ON / OFF – Tilt inversion
PAN degree: 630 ° Or 540 ° – Selection of the maximum angle of PAN
Feedback: ON / OFF – Activation or Deactivation of feedback motors (Copy)
Move Speed: Selection of movement speed between 1 and 4 1 – faster to 4 – slower
Hibernation: OFF – 01 Min to 99 Min – Selection of hibernation Baracca mode. OFF by default or from 1 minute to 99 minutes before switching to hibernation mode.

Dim Mode
Sub-menu allowing the selection of Baracca dimmer mode between Standard (default), Stage, TV, Architectural and Theater. A descent time is automatically applied to the dimmer in stage, TV, Architectural and theater modes.
Temp C ° / F °
Submenu for selecting the Celsius or Fahrenheit system (default), for displaying the temperature.
Dim Curve
Sub-menu allowing the selection Baracca dimmer curve between Linear, Square (default), Inverse Square and S-Curve.
Frequency
Submenu allowing the selection of the refresh rate of the LED to avoid a possible «flicking» during the capture. Changeable values between 900Hz and 25KHz.
Fan Set
– Head Fan
Submenu for selecting the head fan speed between Auto (default) and Silent or High.
– Base Fan
Submenu for selecting the head fan speed between Auto (default) and Silent or High.
LCD Set
Submenu allowing to select the behavior of Baracca display.
Backlight – 01m to 60m – Selection of the display backlight retention time (without menu manipulation) from 1 minutes to 60 minutes. Time set to 1 minute by default.
Flip Display – ON / OFF – Reversal of the display direction
KeyLock – ON / OFF – Lock the Baracca menu buttons.
DispFlash – ON / OFF – Activation or not of the display flash when Baracca does not receive a DMX signal.
Disp.Set
Chan.Value – continuously displays the DMX values of all channels.
Slave Set – Selection of the slave mode of the Baracca to «shift» the Baracca when using the Master / Slave mode – between Slave 1, Slave2 and Slave 3.
Auto Prog – Selection of Master / Slave mode:
In MASTER mode Baracca transmits information to the Baracca connected using a DMX cable and where Slave mode has been activated in the “Slave Set” submenu
In ALONE mode the Baracca does not transmit information and executes its AUTO mode individually.
DFSE – ON / OFF – Reloading the Baracca default parameters.

INFORMATION
Time.Info
CurrentTime: Display of usage time (in hours) since the last power-up
TotalTime: Display of the usage time (in hours) since the first power-up.
LastTime: Display of the usage time (in hours) since the last reset.
Time PIN: To access the reset of usage times you must enter a PIN code: 050 to reset the «CurrentTime»

ClearLast: ON / OFF to reset
Temp.Info – temperature display
Head: xxx F or C – Head temperature display
Base: xxx F or C – Base temperature display
Fan Speed – Fan speed display
Head 1 : xxx RPM
Base 1 : xxx RPM

Error.Info – Display of the last 10 error messages.
Model.Info – Model name display: BARACCA
Software.V – Display of the version of the various processors
1U – Vx.x.x
2U – Vx.x.x
3U – Vx.x.x

TEST
Reset Motors
ALL: Reset of all motors
Pan & Tilt: Reset of Pan and Tilt motors
Head: Reset of all head motors

Test.Channel
Submenu allowing to test all the Baracca parameters such as:
Pan, Pan Fine, Tilt, Tilt Fine, CMY, Color, Gobo, Fixed Gobos, Prism1/2, Prism1/2Rot, Prism3/4, Prism3/4Rot, Focus, Frost, Strobe, Dimmer, Dim Fine, DimMode, P/T Speed.
Panel.Ctrl.
Sub-menu allowing manual adjustment of all Baracca parameters such as:Pan, Pan Fine, Tilt, Tilt Fine, CMY, Color, Gobo, Focus, Gobos, Prism1/2, Prism1/2Rot, Prism3/4, Prism3/4Rot Focus, Frost, Strobe, Dimmer, Dim Fine, DimMode, P/T Speed
Calibrate:
Sub-menu allowing to recalibrate the motors as well as the Baracca’s focus preset parameters.
To access this menu you must enter the PIN code for unlocking this function.
Code Pin: 050
This gives you access to the various parameters:
Pan, Tilt, CMY, Color, Gobo, Focus, Prism1/2, Prism1/2Rot, Prism3/4, Prism3/4Rot Focus, Frost,

COLOR WHEEL

Split Color Effect / Prims

FIXED GOBO

DMX Map

USB Firmware upgrade:

1. Place the update files in a directory on the USB key, In this example LUSSO:

2. Turn on the projector and go to the menu by pressing “Mode” > “Function” > “USB Update” > “On”, exit the menu and turn off the projector.

3. Projector off, DMX or WDMX disconnected, insert the USB key into the connector located on the front panel.

4. Turn on the projector > the screen displays the available directories> select the folder according the projector In this example LUSSO

5. Select «Start» and press «Enter»

6. The update process starts and will upgrade each electronic board.
   The projector will perform a reset at the end of the process

7. Remove the key and check the software versions by pressing «Mode» > «Information» > «Software. V» > «Enter»

8. Go to the menu by pressing “Mode” > “Function” > “USB Update” > “OFF”, exit the menu.

NOTES ——–

STARWAY
22 rue Edouard Buffard
77144 Montevrain
France
Tél.: +33 148 632 211

References

• Starway, fabricant de projecteurs et éclairage professionnel

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>