BOSCH PXY828DX6E Induction Hob Instruction Manual
- July 16, 2024
- Bosch
Table of Contents
BOSCH PXY828DX6E Induction Hob
Product Specifications
- Model Number: 9001703601
- Date of Manufacture: 040626
- Languages: bg, sq, hr, sr, mk, sl
Product Usage Instructions
General Notes:
Follow safety instructions during installation to ensure proper functioning and safety. The installer is responsible for the correct installation according to the provided instructions.
Warnings:
- Magnetism Warning: The device contains permanent magnets that may affect electronic implants such as heart pacemakers or insulin pumps. Keep a minimum distance of 10 cm from the device.
- Injury Warning: Parts accessible during installation may have sharp edges. Wear protective gloves. Follow chemical handling recommendations for safety.
Electrical Connection Notes:
Connect the device only to a protected power outlet. Use cables provided by the manufacturer or service center. Contact the service center for longer cables if needed (up to 2.20m).
Installation Notes:
Adhere to the minimum spacing specified in the installation instructions.
After cutting, remove any debris and secure cut surfaces to withstand heat.
Ventilation:
To ensure proper operation, adequate ventilation for the cooking panel is necessary. Maintain a minimum distance between the cooking panel and upper cabinet surface of 70mm.
Placing Power Cable in Connection Box:
- Place the cooking panel upside down on a soft surface to avoid scratches.
- Lift the connection box cover using a screwdriver.
- Loosen the securing screw and lift the hose clamp using a screwdriver.
- Connect the cable and tighten the screws on the connection box.
- Secure the power cable with the hose clamp and tighten the securing screw.
- Position the cables in the middle of the connection box and close the cover.
Frequently Asked Questions
- Q: How do I clean the cooking panel?
- A: Use a mild detergent and a soft cloth to clean the cooking panel. Avoid abrasive cleaners that may damage the surface.
- Q: Can I use this product with a gas connection?
- A: No, this product is designed for electric connection only. Do not attempt to connect it to a gas supply.
- Q: What should I do if the device malfunctions?
- A: If you encounter any issues with the device, contact our customer service for assistance and avoid attempting repairs yourself.