EZCAP221 AudioDigiBT Audio Digitizer Speaker User Manual

EZCAP221 AudioDigiBT Audio Digitizer Speaker

Thanks for purchasing ezcap221AudioDigiBT Audio Bluetooth Recorder. Please read this manual before use and keep it in a safe place for future reference.

You can use this device:

• Recorder audio from Bluetooth or Audio line input to digital mp3 files and save in Micro SD card or USB drive.
• Play music through Bluetooth, Audio line input, Micro SD card or USB drive.

Overview

In the Box

• ezcap221 AudioDigiBT Audio Bluetooth Recorder x1,
• Manual x1,
• Type C to USB-A charge cable x1

Product Overview and Connection

1. Speaker–With a speaker inside, de, c can listen to music directly.

2. POWER button: keep pressing to switch on, keep press again to switch ooff.
   MODE button: press tto o switch between Bluetooth and Line in play annd record mode (RECORORDD  MODE) and USB drive and Micro SD card playplay mode (PLAYBACK MODE).

3. Blue Bluetooth indicator LED. Fast flash: Bluetooth pairing. On: Bluetooth paired successfully. Slow flash: B Blueluetooth playback.

4. PREVIOUS button, press to play the previous music file.

5. NEXT button, press to play next music file.

6. VOLUME- button, press to decrease the volume.

7. Red charge LED. On: Charging. Flash: Low battery. Off: Normal battery, or complete charging.

8. VOLUME+ button, press to increase the volume, there will be a beep when it reaches the highest volume.

9. PLAY button, press to start playing music, and press again to stop playing.

10. Record / Play LED – Green record and play LED. Fast flash: Recording audio. Slow flash: Playing audio files in USB drive or Micro SD card.

11. RECORD button, press to start recording, and press again to stop recording and save file in a USB drive or Micro SD card.

12. DC5V – Supply 5V/1A DC power with USB-C (Type-C) cable to charge battery

13. Connect earphones to listen the music (3.5mm TRS jack), and the speaker will mute. 14, LINE IN–Connect to audio output port of audio source device like CD player to play or record. (3.5mm TRS jack)

14. USB–PlugUSB drive to play music, or save the recorded music files.

15. Micro SD–Plug Micro SD card to play music or save the recorded music files.

Power & Charge
Red charge LED will flash when the battery is low, and connect Type-C cable to 5V USB DC adapter to charge, LED will light, and will go off when fully charged.

Micro SD Card / USB drive
For file safety, it is best to empty and format the Micro SD card and USB drive before using. Support FAT32, exFAT (does not support NTFS), MAX 64GB. It is not recommended to connect Micro SD card and USB drive at the same time.

Switch MODEs
Power on, default in RECORD mode, and press the MODE button can switch to PLAYBACK mode. Under PLAYBACK mode, if during playing music files, you cannot switch mode directly. Please press PLAY button to stop playing, then press MODE button to switch mode. The MODE switching sequence is: RECORD mode — PLAYBACK mode (Play music in USB drive) — PLAYBACK mode (Play music in Micro SD card).

Start Work

RECORD MODE – Play and Record Bluetooth or Line In Audio  Keep press the POWER button to power on device, and it is in the default RECORD MODE. You can play and record Bluetooth or Line in audio. Blue Bluetooth LED will fast flash, and the device is to pair Bluetooth. Please set the Bluetooth of your audio source device, like your smartphone, and find the device name– ezcap AudioDigiBT, and successfully paired, LED is on. Play the music or video, and you will listen the sound from ezcap221 AudioDigiBT, and LED will slow flash. You also can press PLAY button of device to play or stop playing, and press the PREVIOUS or NEXT button to play the previous or next file. (Maybe you need to set the audio source device)
Plug Micro SD card or USB drive into the slot, and wait a few seconds, then press the RECORD button to start recording, the REC/PLAY LED fast flashes. Press again to stop recording, and the recorded files will be saved in Micro SD card or USB drive you plugged into.
NOTE
The 3.5mm audio cable to connect an audio device (Such as CD player, Cassette player) and the LINE IN port of ezcap221 AudioDigiBT, and you will hear the sound. Pressing PLAY button can mute the speaker, but cannot really stop the playing. Press the RECORD button to start recording, the REC/PLAY LED fast flashes. Press again to stop recording, and the recorded files will be saved in Micro SD card or USB drive you plugged into. Note:

1. The 3.5mm audio cable is not included, please check the accessories of your audio source device or buy it yourself.
2. ezcap221 AudioDigiBT will play the music input from LINE IN when you play the Bluetooth music and plug audio cable into the LINE IN port. And you cannot play Bluetooth music until unplug the cable from the LINE IN port.
3. During recording, the device will create a DIGIBT folder in the storage, and all recorded files will be saved in the form of file name AD0001.mp3.
4. This device can be connected to two Bluetooth transmitting devices at the same time, but it can only play the audio input from one of them. If the playing Bluetooth transmitting device is paused, the device will automatically play the audio input from another one of them.

PLAYBACK MODE – Play Recorded Files in Storage

Press MODE button to switch RECORD MODE to PLAYBACK MODE. ezcap221 AudioDigiBT will automatically play the recorded files in USB drive or Micro SD card. Note:

1. During playing, you cannot press MODE button to switch mode. Please press PLAY button to stop playing, then press MODE button to switch mode.
2. If you plugged USB drive and Micro SD card at the same time, the device will play the music files in USB drive.
3. The device cannot play music files that are not in the DIGIBT folder. And if there is no DIGIBT folder in the storage and there is no playable music file in the folder, it will cause the mode switch to fail. Need to unplug the storage to solve the problem.
4. Device also can play other music files, but please copy them in the DIGIBT folder.

Specifications

User Interface

| Button: POWER/MODE, PREVIOUS, NEXT, VOLUME -, VOLUME +, PLAY,

RECORD. Status indicator LEDs

Storage Media

| Micro SD card and USB drive, supports FAT32 and exFAT, does not

support NTFS format, Max 64GB.

Record Format| .mp3
Record Quality| 160kbps
Record File| About 1.2MB/Minute, 70MB/Hour
Play Format| mp3, ape, flac, wav, wma
Speaker| 4Ω 3W x1

Working Time

| About 2 hours to charge separately, about 5 hours for fully charged

recording (Related to playback volume)

Power Supply

| 1200mAh 18650 lithium battery inside, Type-C to USB power cable (Not

include 5V power adapter)

Dimensions| 178(L) × 60(W) × 70(H) mm

FCC Warning Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>