influencer INVRGB10 10W RGBW Light with Powerbank User Manual
- June 5, 2024
- influencer
Table of Contents
influencer INVRGB10 10W RGBW Light with Powerbank
INCLUDED
- RGB LED Light Power Bank
- USB-C Charging Cable
- Hot/ Cold Shoe Mount
- Instruction Manual
OVERVIEW
- Power
- Mode
- Set
- Plus
- Minus
- 1/4” screw mount
- 1/4” screw mount
- Remaining time
- Brightness Colour
- temperature
- Battery life
- USB port
Specifications
| Power range | 1% – 100%, adjustable |
|---|---|
| Colour temperature | 2300K-8500K(+/- 300), adjustable |
| Max brightness | 630LM |
| Rated output power | 10W |
| Number of LED | 28 RGB led’s + 32 dual white colour led’s |
| Colour rendering | >95(RA), white light mode |
| Charging port | USB-C, 5V/2A |
| Output port | USB-A, 5V/2A |
| Charging time | Approx. 9 hours |
| Built in lithium battery | 5,000mAh |
| Battery life | 100% power@ 5600K for 2 hours |
| Temperature operation | -10C – +35C, storage temp -10C – +50C |
| Mounting port | Universal 1/4 inch mount *2 |
| Dimensions | 140 x 76 x 14mm |
| Weight | 213.5g |
How to use
Power on/off
Press and hold the button for 3 seconds to turn the power on or off.
Mode (M) button controls
Once the LED light is on, press the mode button to toggle between the 8
different modes. The mode number located on the rear LED display will indicate
which mode you are in.
Set button controls
Press Set button to toggle different options of every mode. Plus and minus
controls Push the (+)/ (-) buttons: to adjust the selection up/down; press to
add or decrease the value, press and hold to add or decrease the value
continuously.
| Number | Modes |
|---|---|
| Mode 1 | Orange |
| Mode 2 | Color Temperature |
| Mode 3 | RGB Colours |
| Mode 4 | RGB Adjust Colours |
| Number | Modes |
| --- | --- |
| Mode 5 | Lava Lamp |
| Mode 6 | Lightning Flash |
| Mode 7 | Warning Light |
| Mode 8 | Scenes |
All modes chart
Tips for Best Performance
- Charge before use
- Unplug the power cord after charging
- It is recommended to charge at least every three months to prolong battery life.
Warning
- Please keep the unit dry. Do not touch this product with wet hands. Do not immerse the product in water or expose to rain.
- Do not disassemble, crush, impact or put into fire.
- Do not use in the presence of flammable gases, otherwise may cause an explosion or fire.
- Do not use, store or charge in high temperature environment or closed space under direct sunlight.
- Please use the specified charger to charge the battery and use it within the specified voltage.
- This product involves a battery, please strictly follow the corresponding operating specifications for the use of the battery, otherwise it may cause an explosion or fire.
Influencer™
PO Box 5658 Brendale QLD Australia 4500 Customer Support 1800 812 261
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>