CREMA DF64 Grinder Cradle Installation Guide
- May 15, 2024
- CREMA
Table of Contents
Grinder Cradle
Installation Instructions
for the DF64
IMPORTANT:
Disconnect your machine from its power source before moving forward with
your installation.
Step 1 – Choosing Your Mounts
Your grinder cradle can be set at two different heights, based on the
accessories you plan to use.
UPPER: If using the Crema Dosing Cup, ora Crema Portafilter without a
Crema Dosing Funnel, mount the cradle to the upper mounting holes.
LOWER: If using the Crema Portafilter with a Crema Dosing Funnel, mount
the cradle to the lower holes.
Note: The curved side of the base should face away from the cradle arms,
as shown.
Step 2 – Remove Stock Cradle
A: Remove the stock cradle by removing the philips head screw located in the
center of the cradle.
B: Remove
both philips head screws located on the body of the grinder, under the
mounting location of the stock cradle.
Step 3 – Attaching the Crema Cradle
Using the screws provided (black), mount the Crema Cradle to the grinder,
using the holes from the previous step (Step 2:B).
Thank you for choosing Crema!
Grind on!
Documents / Resources
|
CREMA DF64 Grinder
Cradle
[pdf] Installation Guide
DF64, DF64 Grinder Cradle, Grinder Cradle, Cradle
---|---