DYBERG LARSEN 1203321 20W E27 LED Coast Pendant Instruction Manual
- June 3, 2024
- DYBERG LARSEN
Table of Contents
DYBERG LARSEN 1203321 20W E27 LED Coast Pendant
INSTALLATION INSTRUCTION
FEATURE
Material: Metal
Max: 20W E27 LED
IMPORTANT:
- Warning : Always remember to turn off the voltage before working on the electrical installation.
- The lamp might get warm under use.
- To avoid injury to the lamp, please don’t use alkalic detergent. Use a soft cloth and gentle detergent. Always turn the lamp off when cleaning it.
- The omission of cleaning the lamp can have a negative effect on the lifetime. And possible can lead to a dangerous situation.
Changing the bulb:
- Turn off the power at the head fuse.
- Screw the defective bulb loose (see drawing).
- Change the bulb(Please only use the recommended type).
- Turn on the power.
230V~50Hz
Contains: Complete lamp (excl. bulb) IP20 only for indoor use
DISPOSAL
- Electrical and electronic equipment (EEE) contains materials, components and substances that can be hazardous and harmful to human health and the environment when waste of electrical and electronic equipment ( WEEE) is not disposed of properly.
- Products marked with ” the crossed-out rubbish bin ” shown below are electrical and electronic equipment. The crossed-out rubbish bin symbolizes that the waste of electrical and electronic equipment may not be disposed of with unsorted household waste but must be collected separately.
Produced in
www.dyberglarsen.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>