TELE System QSG Smart TV Instructions
- June 4, 2024
- TELE System
Table of Contents
TELE System QSG Smart TV Instructions
Product description
Connections
The following inputs and outputs are available behind the TV:
- USB 2.0 (x2): USB2.0 ports for Mediaplayer function
- Headphone output: 3.5mm jack.
- CI/CI: CI/CI Common Interface module slot.
- Audio Out: Digital audio output.
- HDMI1, HDMI2, HDMI3 (v.1.4): to connect an AV source.
- RF IN (T2/C): Antenna input (IEC) for terrestrial (DVB-T/T2) or cable (DVB-C).
- RF IN (S2): Satellite RF Antenna Input (type F).
- RCA: Audio-video input for connection of RCA devices (CVBS – Stereo LR).
- PC Audio IN and PC VGA: audio inputs (jack 3.5mm) and video (VGA) for PC.
- YPbPr (mini): Component Video Input (jack 3.5mm)
- LAN: Ethernet port (RJ45) required for SmartTV/HbbTV functions.
- Power (230VAC, 50Hz)
Remote Control
Place 2 AAA batteries (not supplied) in the remote control compartment respecting the correct polarities. Exhausted batteries must be disposed of separately from household waste and bring to any point of sale or collection.
WARNINGS
To prevent corrosive liquid leakage from damaging the remote control, it is advisable to remove the batteries if you believe you will not use the device for a long time. Avoid using different types of batteries such as new and used batteries at the same time.
First installation
Connect the antenna cable (terrestrial and/or satellite) and the ethernet
cable (if available).
After turning on the TV, perform the first installation as from wizard, use
the arrows and OK keys to select and confirm:
Step 1,2,3,4. Language/Country/Password/Time Zone Choice;
Step 5. Connecting to the network (cable or wireless)’;
a. Cable: the connection to the network is established without any kind
of intervention;
b. Wireless: Select use WiFi, then choose the WiFi network you want to
connect to the TV and enter the password (press OK to invoke virtual
keyboard), confirm selecting Connect;
Step 6. APP “E-Share”, use the QR Code to download and install the app;
Step 7. Choosing the startup mode/source;
WARNINGS
The system does not accept the value “0000” as the password. The E-Share app has to be installed on the mobile device (e.g. smartphone), to properly works the mobile device and the Smart TV need to be connected to the same network. The application does not completely replace the traditional remote control, it is made mainly to use the Smart features of the TV (applications, mediaplayers, etc…). Some applications require the use of a keyboard and/or mouse; in this case the traditional remote control provided with the TV is not sufficient to control them
Main functions
Digital TV mode
Channel Search:
- Go to the Channel menu;
- Select the source from the Antenna Type (Earth, Cable, or Satellite) entry;
- Select the Scan item;
- Define the search parameters according to the antenna system and/or preferences;
- Start scanning
NOTE
If you choose to use the LCN (terrestrial) or TivùSat (satellite) function, a channel list with a predefined sort order will be created at the end of the search. Viewing encrypted channels requires the use of a dedicated conditional access module (CAM) and its smart-card (CA) to be purchased separatel
Selecting channels:
At the end of the scan a channel list will be created for each source, the
channel lists can be consulted individually after the selection of the source,
for example:
- Terrestrial Channels: Access the Channel/Antenna Type menu and set Terrestrial
- Satellite Channels: Access the Channel/Antenna Type menu and set Satellite
Smart (Home) mode
The Home menu, also accessible directly from the Home button of the remote control, allows you to access the following features: – Application management and use;
- Navigation browser,
- Selection of input sources/modes:
- Access to application store for apps download and installation.
- Access to the Multimedia menu for playing audio/video content from USB external memory devices or for files managing saved in the INTERNAL memory of the TV, such as. installation from APK files (for advanced users only).
- Access to the system settings
System Settings
Accessible from the Home menu, allows you to configure:
– Network settings (network connection via LAN or Wireless);
– Time setting for adjusting the time and its parameters;
– Common settings, for general changes such as language, keyboard type,
permission/account management;
– Info, to get system information (HW/SW version, MAC address, memory, GPU…).
WARNINGS
To take advantage of SMART TV features, you need to connect your TV to the internet.
Advanced functions
Antenna system configuration (Sat)
The default settings include the configuration of a single LNB fixed antenna
system, receiving the signal from the Hotbird 13-E satellite.
In the case of different antenna system, you need to change the configuration,
modifing the parameters in the Channels/Scan menu.
NOTES AND WARNINGS
The TV is compatible with universal single converter, multi-satellite DiSEqC (1.0 – 1.1 – 1.2 – 1.3) and multi-user SCR/Unicable systems. Incorrect antenna configuration can result in some or all channels not loading. we recommend that you contact a professional installer for installation. The Signal Level and Quality indicators refer to the selected satellite Trasponder on the screen. Make sure that it is valid/updated and really active. It is not recommended to avoid connecting the TV to the satellite signal via the via- the-radar antenna connector (LNB Out/Loop Through) of an external satellite receiver because both devices cannot operate at the same time. In the case of a system with LNB SCR: each TV/receiver connected to the same system must use a different SCR channel. To connect multiple receiving devices to an SCR system, do not use the loop through antenna connection of an external satellite receiver, but use a dedicated external signal party.
Factory reset (reset)
Resets all settings to the initial condition.
Accessible from the Home menu > Settings > Common > System Restor
WARNING
Restoring factory settings clears all customizations made by the user, including stored channels, downloaded applications, and changed settings. In addition, confirming the reset, the TV will perform a full system restart, then display the first installation wizard on screen
Technical specifications
| Panel | Format | 31,5” – 16:9 wide (80 cm) |
|---|---|---|
| Resolution | 1366×768 (HD) | |
| Contrast | 3000:1 | |
| Brightness | 180 (cd/m2) | |
| Viewing angle | 178°/178° (Horizontal/Vertical) | |
| Inputs | HDMI | x3 – HDMI |
| A/V in | x1 – CVBS + Audio LR | |
| USB | x2 – USBv2.0, compatible FAT32e NTFS, Media player function | |
| VGA | x1 – DSUB15 + Audio PC | |
| LAN | x1 – RJ45, Ethernet 10/100 |
TV Signals
| RF input (DTT)| x1- 75 Ω, type IEC, VHF/UHF 7MHz/8MHz
RF input (SAT)| x1 – 75 Ω, F type
Common Interface| x1 – CI / CI+
Video| MPEG-2, MPEG-4,
H.265.Main@L4.1-1920*1080@50fps
Audio| MPEG-1 layer 1/2, MPEG-2 layer 2/Dolby AC3 H.265
Speaker| 10W x2 + 10W x2
General| Power Supply| 100-240V, 50/60Hz
Power Consum| <0,5W in Standby; 56 W max
USB supported| AVI/MP4/MKV, WenM, 3GPP, MPEG transport stream
Wi-Fi| IEEE b/g/n, 2,4GHz
TV dimension s| with supports| 732 x 512 x 196 mm (WxHxD)
without supports| 732 x 470 x 75mm (WxHxD)
Standard wall bracket| VESA 200/100
Included Accessories| x1 standard remote control, x1 instruction manual
Simplified EU conformity declaration
he manufacturer, TELE System Digital s.r.l.., states that the radio equipment type of SMART TV named SONIC32 SMART complies with the 2014/53/EU directive. The full text of the EU compliance declaration is available at the following Internet address: https://www.telesystem.it/CE
28000176 SONIC32 SMART
Per informazioni dettagliate, si invita a visitare il sito di TELE System
Digital Srl
For detailed information, please visit the TELE System Digital Srl website
Coperto da una o più rivendicazioni dei brevetti elencati in
patentlist.hevcadvance.com.
Covered by one or more claims of the patents listed at
patentlist.hevcadvance.com