TELE System TS SMV13 Smart TV User Guide
- June 10, 2024
- TELE System
Table of Contents
TS SMV13 Smart TV User Guide
Product description
Connections
The following inputs and outputs are available behind the TV:
- USB 2.0 (x2): USB2.0 ports for Mediaplayer function
- Headphone output: 3.5mm jack.
- CI/CI: CI/CI Common Interface module slot.
- Audio Out: Digital audio output.
- HDMI1, HDMI2, HDMI3 (v.1.4): to connect an AV source.
- RF IN (T2/C): Antenna input (IEC) for terrestrial (DVB-T/T2) or cable (DVB-C).
- RF IN (S2): Satellite RF Antenna Input (type F).
- RCA: Audio-video input for connection of RCA devices (CVBS – Stereo LR).
- LAN: Ethernet port (RJ45) required for SmartTV/HbbTV functions.
- Power (230VAC, 50Hz)
Remote Control
Place 2 AAA batteries (not supplied) in the remote control compartment
respecting the correct polarities. Exhausted batteries must be disposed of
separately from household waste and bring to any point of sale or collection.
WARNINGS
To prevent corrosive liquid leakage from damaging the remote control, it is
advisable to remove the batteries if you believe you will not use the device
for a long time.
Avoid using different types of batteries such as new and used batteries at the
same time.
First installation
Connect the antenna cable (terrestrial and/or satellite) and the ethernet
cable (if available).
After turning on the TV, perform the first installation as from wizard, use
the arrows and OK keys to select and confirm:
Step 1. Select the OSD Language;
Step 2. Connecting to the network (cable or wireless)’;
a. Cable: the connection to the network is established without any kind of
intervention;
b. Wireless: Select use WiFi, then choose the WiFi network you want to connect
to the TV and enter the password (press OK to invoke virtual keyboard),
confirm selecting Connect;
Step 3. Select the Country;
Step 4, 5. Terms of service and Conditions (it is possible to skip those
steps, but some functionalities could be not available);
Step 6. Select the operative mode. In case of TV selection, TV will ask to set
the channel scanning;
Step 7. Set and confirm PIN (the PIN is requested in some setting submenus);
WARNINGS
The system does not accept the value “0000” as the password.
Step 8. TV asks the channel scanning (terrestrial and/or satellite). Please
refer to par. 1.1 .
Main functions
1.1 Channel scanning
In order to enter in Channel Search menu: Menu – Settings – Channel – Auto
Scan (enter PIN):
-
Select the source from the Antenna Type (Earth, Cable, or Satellite). Multiple selection is allowed;
-
Satellite:
a) Select the operator (Tivusat or Standard)
b) Select antenna system (Single LNB, DiSEqC, Unicable)
c) Select satellite (ITALY default value: Hotbird 13°East) -
Terrestrial:
a) Select the channel ordering (LCN)
b) Scanning mode: DTV -
Start scanning
NOTE
If you choose to use the LCN (terrestrial) or TivùSat (satellite) function, a
channel list with a predefined sort order will be created at the end of the
search.
Viewing encrypted channels requires the use of a dedicated conditional access
module (CAM) and its smart-card (CA) to be purchased separately.
1.2 Channel list
At the end of the scan a channel list will be created (for each front-end),
pressing CH.LIST button, the user can navigate and edit the channel list; for
example, create a FAV list, add some channels to HOMEPAGE, filter the channel
list and edit it (moving or deleting).
If both terrestrial and satellite channels has been scanned and saved, via
channel list it is possible to move from a TV mode (terrestrial) to the other
(satellite): press RIGHT arrow key, the available options will be listed,
select and confirm the wanted one, back to the channel list with LEFT arrow
key and select a wanted channel for its watching.
The Channel list menu is available also from OSD user menu (menu button).
1.3 Antenna system configuration (Sat)
The default settings include the configuration of a single LNB fixed antenna
system, receiving the signal from the Hotbird 13-E satellite.
In the case of different antenna system, you need to change the configuration,
modifing the parameters in the Channels/Scan/LNB menu.
NOTES AND WARNINGS
The TV is compatible with universal single converter, multi-satellite DiSEqC
(1.0 – 1.2) and multi-user SCR/dCSS/Unicable systems.
Incorrect antenna configuration can result in some or all channels not
loading. we recommend that you contact a professional installer for
installation.
The Signal Level and Quality indicators refer to the selected satellite
Trasponder on the screen. Make sure that it is valid/updated and really
active.
It is not recommended to avoid connecting the TV to the satellite signal via
the via-the-radar antenna connector (LNB Out/Loop Through) of an external
satellite receiver because both devices cannot operate at the same time.
In the case of a system with LNB SCR: each TV/receiver connected to the same
system must use a different SCR channel.
To connect multiple receiving devices to an SCR system, do not use the loop
through antenna connection of an external satellite receiver, but use a
dedicated external signal party.
1.4 Smart (Home) mode
The Home menu, also accessible directly from the Home button of the remote
control, allows you to access the following features:
– Application management and use;
– Navigation browser,
– Selection of input sources/modes:
– Access to the system settings
WARNINGS
To take advantage of SMART TV features, you need to connect your TV to the
internet.
1.5 Factory reset (reset)
Resets all settings to the initial condition.
Accessible from the Home menu > Settings > Support > Reset to Factory Default
enter
PIN.
The user can keep the channel list with the personal preference/modification and /or the FAVORITE list flagging the option before the restoring.
WARNING
Restoring factory settings clears all customizations made by the user, including stored channels, downloaded applications, and changed settings. In addition, confirming the reset, the TV will perform a full system restart, then display the first installation wizard on screen
1.6 E-Manual
The extended user manual is available in MENU > Setting > Support > E-Manual. The digital version is reachable via QR code (on the top-right corner) for the reading or downloading on your mobile device.
Technical specifications
| Panel | Format | 27″ – 16:9 wide (69 cm) |
|---|---|---|
| Resolution | 1920 x 1080 (full HD) | |
| Contrast | 4000:1 | |
| Brightness | 200 (cd/m1 | |
| Viewing angle | 178°/178° (Horizontal/Vertical) | |
| Inputs | HDMI | x3 – HDMI |
| A/V in | x1 – CVBS + Audio LR | |
| USB | x2 – USBv2.0, compatible FAT32e NTFS, Media player function | |
| Audio output | OPTICAL + headphone (jack3,5mm) | |
| LAN | x1 – RJ45, Ethernet 10/100 | |
| TV Signals | RF input (DTT) | x1- 75 0, type IEC, VHF/UHF 7MHz/8MHz |
| RF input (SAT) | x1 – 75 0, F type | |
| Common Interface | x1 – CI / CI+ | |
| Video | MPEG-2, MPEG-4, H.265 | |
| Audio | MPEG-1 layer 1/2, MPEG-2 layer 2/AC3/EAC3 | |
| Speaker | 3W x2 | |
| General | Power Supply | 100-240V, 50/60Hz |
| Power Consum | <0,5W in Standby; 40 W max | |
| USB supported | AVI/MP4/MKV,WenM,361DP,MPEG transport stream, FLV | |
| Wi-Fi | IEEE b/g/n, 2,4GHz | |
| TV dimension s | with supports | 637 x 411 x 186 mm (WxHxD) |
| without supports | 637 x 379 x 62 mm (WxHxDI | |
| Standard wall bracket | VESA 100 | |
| Included Accessories | x1 standard remote control, x1 EASY remote control unit, |
x1 instruction manual
Simplified EU conformity declaration
The manufacturer, TELE System Digital s.r.l., states that the radio equipment
type of SMART
TV named TS27 FHD SMV13 complies with the 2014/53/EU directive.
The full text of the EU compliance declaration is available at the following
Internet address: https://www.telesystem.it/CE
**28000220 TS27 FHD SMV13
For detailed information, please visit the TELE System Digital Srl website
Covered by one or more claims of the patents listed at
patentlist.hevcadvance.com**
TELE System Digital Srl
Via dell’Artigianato, 35
36050 Bressanvido (VI)
Website:www.telesystem-world.com