TELE System 28000210 24 LS2 A11 Smart TV User Guide
- June 10, 2024
- TELE System
Table of Contents
TELE System 28000210 24 LS2 A11 Smart TV
Product Information
The TELE System is a television that has multiple input and output options. It has a Common Interface slot for CI/CI+ modules, two USB 2.0 ports for media player function, an RF IN (T2/C) input for digital terrestrial or cable, an RF IN (S2) input for satellite antenna, three HDMI ports for AV source connection, an AV RCA (Video + Stereo) input, an optical digital audio output, an Ethernet port for SmartTV function, and a 220V AC power supply. The television comes with a remote control that requires batteries. It is important to remove the batteries if the remote control is not in use for an extended period to avoid damage caused by corrosive liquid leakage. The manual also advises against using different types of batteries or mixing new and old batteries. The TELE System requires antenna and Ethernet cables to be connected before the initial setup. The first installation is done through a guided procedure that involves selecting language, country, password, and time zone. It also includes connecting to the network via cable or wireless. The TELE System has several functions, including channel search and system settings configuration. The channel search involves accessing the Channel menu, selecting the source from the Antenna Type (Terrestrial, Cable, or Satellite) option, defining search parameters based on antenna setup and preferences, and initiating the scan. The system settings configuration is accessible from the Home menu and allows for network settings configuration (LAN or wireless), time settings, general modifications like language and keyboard type, and system information like hardware and software version, MAC address, memory, and GPU. The TELE System also has a factory reset option that restores all settings to their original condition. This option is accessible from the Home menu under Settings > Common > System Reset. The TELE System has a range of technical specifications, including inputs for AV, USB, TV signals, LAN, and antenna, audio output, speakers, power supply, and consumption. It supports various formats via USB and Wi-Fi connectivity and comes with a wall mount and accessories.
Product Usage Instructions
To use the TELE System, connect the antenna and Ethernet cables before turning on the TV. Follow the guided procedure to complete the initial setup, including language, country, password, time zone, and network connection. To search for channels, access the Channel menu and select the source from the Antenna Type option. Define search parameters based on antenna setup and preferences and initiate the scan. To configure system settings, access the Home menu and select System Settings. Configure network settings (LAN or wireless), time settings, general modifications like language and keyboard type, and system information like hardware and software version, MAC address, memory, and GPU. To restore factory settings, access the Home menu and select Settings > Common > System Reset. Refer to the manual for more detailed instructions on using specific features like media player function and installing APK files.
Product description
Connections
The following inputs and outputs are available behind the TV:
- CI/CI+: housing for CI/CI + common interface modules.
- USB (x2): USB2.0 ports for connecting USB mass storage devices for multimedia playback (Media player function).
- RF IN (T2/C): antenna input (IEC type) for receiving digital terrestrial (DVB-T / T2) or cable (DVB-C) signal.
- RF IN (S2): SATELLITE RF Antenna input (type F).
- HDMI1, HDMI2, HDMI3: HDMI digital audio-video inputs (v.1.4) for connecting an external AV source (e.g. a receiver or DVD player) equipped with an HDMI interface.
- AV/in (RCA) : analogue audio-video input for connecting an AV device with a CVBS+ Stereo interface.
- Optical: digital audio output.
- LAN : Ethernet (RJ45) port for connection to the Internet, necessary for the Smart TV function.
- Supply : 220V AC
Remote Control
Place 2 AAA batteries (not supplied) in the remote control compartment
respecting the correct polarities. Exhausted batteries must be disposed of
separately from household waste and bring to any point of sale or collection.
WARNINGS
To prevent corrosive liquid leakage from damaging the remote control, it is
advisable to remove the batteries if you believe you will not use the device
for a long time. Avoid using different types of batteries such as new and used
batteries at the same time.
First installation
Connect the antenna cable (terrestrial and/or satellite) and the ethernet cable (if available). After turning on the TV, perform the first installation as from wizard, use the arrows and OK keys to select and confirm:
- Step 1,2,3,4. Language/Country/Password/Time Zone Choice;
- Step 5. Connecting to the network (cable or wireless)’;
- a. Cable : the connection to the network is established without any kind of intervention;
- b. Wireless: Select use WiFi, then choose the WiFi network you want to connect to the TV and enter the password (press OK to invoke virtual keyboard), confirm selecting Connect;
- Step 6. APP “MH-Share”, use the QR Code to download and install the app;
- Step 7. Choosing the startup mode/source;
WARNINGS
The system does not accept the value “0000” as the password. The MH-Share app
has to be installed on the mobile device (e.g. smartphone), to properly works
the mobile device and the Smart TV need to be connected to the same network.
The application does not completely replace the traditional remote control, it
is made mainly to use the Smart features of the TV (applications,
mediaplayers, etc…). Some applications require the use of a keyboard and/or
mouse; in this case the traditional remote control provided with the TV is not
sufficient to control them.
Main functions
Digital TV mode
Channel Search:
- Go to the Channel menu;
- Select the source from the Antenna Type (Earth, Cable, or Satellite) entry;
- Select the Scan item;
- Define the search parameters according to the antenna system and/or preferences;
- Start scanning
NOTE
If you choose to use the LCN (terrestrial) or TivùSat (satellite) function, a
channel list with a predefined sort order will be created at the end of the
search. Viewing encrypted channels requires the use of a dedicated conditional
access module (CAM) and its smart-card (CA) to be purchased separately.
Selecting channels:
At the end of the scan a channel list will be created for each source, the
channel lists can be consulted individually after the selection of the source,
for example:
- Terrestrial Channels: Access the Channel/Antenna Type menu and set Terrestrial
- Satellite Channels: Access the Channel/Antenna Type menu and set Satellite
Smart (Home) mode
The Home menu, also accessible directly from the Home button of the remote
control, allows you to access the following features:
- Application management and use;
- Navigation browser,
- Selection of input sources/modes:
- Access to application store for apps download and installation.
- Access to the Multimedia menu for playing audio/video content from USB external memory devices or for files managing saved in the INTERNAL memory of the TV, such as. installation from APK files (for advanced users only).
- Access to the system settings
System Settings
Accessible from the Home menu, allows you to configure:
- Network settings (network connection via LAN or Wireless);
- Time setting for adjusting the time and its parameters;
- Common settings, for general changes such as language, keyboard type, permission/account management;
- Info, to get system information (HW/SW version, MAC address, memory, GPU…).
WARNINGS
To take advantage of SMART TV features, you need to connect your TV to the
internet.
Advanced functions
Antenna system configuration (Sat)
The default settings include the configuration of a single LNB fixed antenna
system, receiving the signal from the Hotbird 13-E satellite. In the case of
different antenna system, you need to change the configuration, modifing the
parameters in the Channels/Scan menu.
NOTES AND WARNINGS
The TV is compatible with universal single converter, multi-satellite DiSEqC
(1.0 – 1.1 – 1.2 – 1.3) and multi-user SCR/Unicable systems. Incorrect antenna
configuration can result in some or all channels not loading. we recommend
that you contact a professional installer for installation. The Signal Level
and Quality indicators refer to the selected satellite Trasponder on the
screen. Make sure that it is valid/updated and really active. It is not
recommended to avoid connecting the TV to the satellite signal via the via-
the-radar antenna connector (LNB Out/Loop Through) of an external satellite
receiver because both devices cannot operate at the same time. In the case of
a system with LNB SCR: each TV/receiver connected to the same system must use
a different SCR channel. To connect multiple receiving devices to an SCR
system, do not use the loop through antenna connection of an external
satellite receiver, but use a dedicated external signal party.
Factory reset (reset)
Resets all settings to the initial condition. Accessible from the Home menu >
Settings > Common > System Restore
WARNING
Restoring factory settings clears all customizations made by the user,
including stored channels, downloaded applications, and changed settings. In
addition, confirming the reset, the TV will perform a full system restart,
then display the first installation wizard on screen
Technical specifications
Panel
| Format| 23,6” – 16:9 wide (60 cm)
---|---|---
Resolution| 1366 x 768 (HD Ready)
Contrast| 3000:1
Brightness| 180 (cd/m2)
Viewing angle| 178°/178° (Horizontal/Vertical)
Inputs
| HDMI| x3 – HDMI
A/V in| AV in (CVBS+Audio)
USB| x2 – USBv2.0, filesystem FAT32e NTFS, Mediaplayer
Audio output| x1 – Optical
LAN| x1 – RJ45, Ethernet 10/100
TV Signals
| RF input (DTT)| x1- 75 Ω, tipo IEC, VHF/UHF 7MHz/8MHz
RF input (SAT)| x1 – 75 Ω, tipo F
Common Interface| x1 – CI / CI+
Video| MPEG-2, MPEG-4,
H.265.Main@L4.1-1920*1080@50fps
Audio| MPEG-1 layer 1/2, MPEG-2 layer 2/Dolby AC3 H.265
Speaker| 2 x 5 W
General
| Power Supply| 100-240V, 50/60Hz
Power Consum| <0,5W in Stand.by / 36W Max
USB supported| AVI/MP4/MKV, WenM, 3GPP, MPEG transport stream
Wi-Fi| IEEE b/g/n, 2,4GHz
TV
dimension s
| with supports| 551 x 377 x 180 mm
without supports| 551 x 328 x 76 mm
Standard wall bracket| VESA 100/100
Included Accessories| x1 standard remote control, x1 instruction manual
Simplified EU conformity declaration
The manufacturer, TELE System Digital s.r.l.., states that the radio equipment type of SMART TV named SMART24 LS2 A11 complies with the 2014/53/EU directive. The full text of the EU compliance declaration is available at the following Internet address: https://www.telesystem.it/CE