TELE System SMART24 LX2 A11 Smart LED Display User Guide
- June 9, 2024
- TELE System
Table of Contents
SMART24 LX2 A11 Smart LED Display
User Guide
Product description
1.4 Connections
The following inputs and outputs are available behind the TV:
- CI/CI+: housing for CI/CI + common interface modules.
- USB (x2): USB2.0 ports for connecting USB mass storage devices for multimedia playback (Media player function).
- RF IN (T2/C): antenna input (IEC type) for receiving digital terrestrial (DVB-T / T2) or cable (DVB-C) signal.
- RF IN (S2): SATELLITE RF Antenna input (type F).
- HDMI1, HDMI2, HDMI3: HDMI digital audio-video inputs (v.1.4) for connecting an external AV source (e.g. a receiver or DVD player) equipped with an HDMI interface.
- AV/in (RCA): analogue audio-video input for connecting an AV device with a CVBS+ Stereo interface.
- Optical: digital audio output.
- LAN: Ethernet (RJ45) port for connection to the Internet, necessary for the Smart TV function.
- Supply: 220V AC and 12V DC (external)
1.4.1 Remote Control
Place 2 AAA batteries (not supplied) in the remote control compartment
respecting the correct polarities. Exhausted batteries must be disposed of
separately from household
waste and bring to any point of sale or collection.
WARNINGS
To prevent corrosive liquid leakage from damaging the remote control, it is
advisable to remove the batteries if you believe you will not use the device
for a long time.
Avoid using different types of batteries such as new and used batteries at the
same time.
First installation
Connect the antenna cable (terrestrial and/or satellite) and the ethernet
cable (if available).
After turning on the TV, perform the first installation as from wizard, use
the arrows and OK keys to select and confirm:
Step 1,2,3,4. Language/Country/Password/Time Zone Choice;
Step 5. Connecting to the network (cable or wireless)’;
a. Cable: the connection to the network is established without any kind of
intervention;
b. Wireless: Select use WiFi, then choose the WiFi network you want to connect
to the TV and enter the password (press OK to invoke virtual keyboard),
confirm selecting Connect;
Step 6. APP “MH-Share”, use the QR Code to download and install the app;
Step 7. Choosing the startup mode/source;
WARNINGS
The system does not accept the value “0000” as the password.
The MH-Share app has to be installed on the mobile device (e.g. smartphone),
to properly works the mobile device and the Smart TV need to be connected to
the same network.
The application does not completely replace the traditional remote control, it
is made mainly to use the Smart features of the TV (applications,
mediaplayers, etc…). Some applications require the use of a keyboard and/or
mouse; in this case the traditional remote control provided with the TV is not
sufficient to control them.
Main functions
1.5 Digital TV mode
Channel Search:
- Go to the Channel menu;
- Select the source from the Antenna Type (Earth, Cable, or Satellite) entry;
- Select the Scan item;
- Define the search parameters according to the antenna system and/or preferences;
- Start scanning
NOTE
If you choose to use the LCN (terrestrial) or TivùSat (satellite) function, a
channel list with a predefined sort order will be created at the end of the
search.
Viewing encrypted channels requires the use of a dedicated conditional access
module (CAM) and its smart-card (CA) to be purchased separately.
Selecting channels:
At the end of the scan a channel list will be created for each source, the
channel lists can be consulted individually after the selection of the source,
for example:
- Terrestrial Channels: Access the Channel/Antenna Type menu and set Terrestrial
- Satellite Channels: Access the Channel/Antenna Type menu and set Satellite
1.6 Smart (Home) mode
The Home menu, also accessible directly from the Home button of the remote
control, allows you to access the following features:
– Application management and use;
– Navigation browser,
– Selection of input sources/modes:
– Access to application store for apps download and installation.
– Access to the Multimedia menu for playing audio/video content from USB
external memory devices or for files managing saved in the INTERNAL memory of
the TV, such as. installation from APK files (for advanced users only).
– Access to the system settings
1.6.1.1 System Settings
Accessible from the Home menu, allows you to configure:
– Network settings (network connection via LAN or Wireless);
– Time setting for adjusting the time and its parameters;
– Common settings, for general changes such as language, keyboard type,
permission/account management;
– Info, to get system information (HW/SW version, MAC address, memory, GPU…).
WARNINGS
To take advantage of SMART TV features, you need to connect your TV to the
internet.
Advanced functions
1.6.1.2 Antenna system configuration (Sat)
The default settings include the configuration of a single LNB fixed antenna
system, receiving the signal from the Hotbird 13-E satellite.
In the case of different antenna system, you need to change the configuration,
modifing the parameters in the Channels/Scan menu.
NOTES AND WARNINGS
The TV is compatible with universal single converter, multi-satellite DiSEqC
(1.0 – 1.1 – 1.2 – 1.3) and multi-user SCR/Unicable systems.
Incorrect antenna configuration can result in some or all channels not
loading. we recommend that you contact a professional installer for
installation.
The Signal Level and Quality indicators refer to the selected satellite
Trasponder on the screen. Make sure that it is valid/updated and really
active.
It is not recommended to avoid connecting the TV to the satellite signal via
the via-the-radar antenna connector (LNB Out/Loop Through) of an external
satellite receiver because both devices cannot operate at the same time.
In the case of a system with LNB SCR: each TV/receiver connected to the same
system must use a different SCR channel.
To connect multiple receiving devices to an SCR system, do not use the loop
through antenna connection of an external satellite receiver, but use a
dedicated external signal
party.
1.7 Factory reset (reset)
Resets all settings to the initial condition.
Accessible from the Home menu > Settings > Common > System Restore
WARNING
Restoring factory settings clears all customizations made by the user,
including stored channels, downloaded applications, and changed settings. In
addition, confirming the reset, the TV will perform a full system restart,
then display the first installation wizard on screen
Technical specifications
| Panel | Format | 23,6″ – 16:9 wide (60 cm) |
|---|---|---|
| Resolution | 1366 x 768 (HD Ready) | |
| Contrast | 3000:1 | |
| Brightness | 180 (cd/m2) | |
| Viewing angle | 178°/178° (HorizontalNerticall | |
| Inputs | HDMI | x3 – HDMI |
| AN in | AV in ICVBStAudio) | |
| USB | x2 – USBv2.0, filesystem FAT32e NTFS, Mediaplayer | |
| Audio output | x1 – Optical | |
| LAN | x1 – Ribs, Ethernet 10/100 | |
| TV Signals | RF input (OTT) | x1- 75 0, tipo IEC, VHF/UHF 7MHz/8MHz |
| RF input (SAT) | x1 – 75 0, tipo F | |
| Common Interface | x1 – Cl / CI+ | |
| Video | MPEG-2, MPEG-4, H.265.Mainab.1-1920•1080(850fps | |
| Audio | MPEG-1 layer 1/2, MPEG-2 layer 2/Dolby AC3 H.265 | |
| Speaker | 2 x 5 W | |
| General | Power Supply | 100-240V. 50/60Hz – Input port for 12V DC. 3A external |
| Power Consum | <0,5W in Stand.by / 36W Max | |
| USB supported | AVI/MP4/MKV, WenM, 3GPP, MPEG transport stream | |
| Wi-Fi | IEEE b/g/n, 2,4GHz |
TV
dimensions| with supports| 551 x 377 x 180 mm
without supports| 551 x 328 x 76 mm
Standard wall bracket| VESA 100/100
Included Accessories| x1 standard remote control, x1 instruction manual
Simplified EU conformity declaration
The manufacturer, TELE System Digital s.r.l.., states that the radio equipment
type of SMART TV named SMART24 LX2 A11 complies with the 2014/53/EU directive.
The full text of the EU compliance declaration is available at the following
Internet address: https://www.telesystem.it/CE
28000209 LED TV SMART24 LX2 A11
Per informazioni dettagliate, si invita a visitare il sito di TELE System
Digital Srl
For detailed information, please visit the TELE System Digital Srl website
Coperto da una o più rivendicazioni dei brevetti elencati in
patentlist.accessadvance.com.
Covered by one or more claims of the patents listed at
patentlist.accessadvance.com.
TELE System Digital Srl
Via dell’Artigianato, 35
36050 Bressanvido (VI)
Website: www.telesystem-world.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>