TELE System Sonic Smart 32-Inch Smart TV User Manual

June 5, 2024
TELE System

TELE System Sonic Smart 32-Inch Smart TV

Product description

Connections

The following inputs and outputs are available behind the TV:

  1. USB 2.0 (x2): USB2.0 ports for Mediaplayer function
  2. Headphone output: 3.5mm jack.
  3. CI/CI: CI/CI Common Interface module slot.
  4. Audio Out: Digital audio output.
  5. HDMI1, HDMI2, HDMI3 (v.1.4): to connect an AV source.
  6. RF IN (T2/C): Antenna input (IEC) for terrestrial (DVB-T/T2) or cable (DVB-C).
  7. RF IN (S2): Satellite RF Antenna Input (type F).
  8. RCA: Audio-video input for connection of RCA devices (CVBS – Stereo LR).
  9. PC Audio IN and PC VGA: audio inputs (jack 3.5mm) and video (VGA) for PC.
  10. YPbPr (mini): Component Video Input (jack 3.5mm)
  11. LAN: Ethernet port (RJ45) required for SmartTV/HbbTV functions.
  12. Power (230VAC, 50Hz)
Remote Control

Place 2 AAA batteries (not supplied) in the remote control compartment respecting the correct polarities. Exhausted batteries must be disposed of separately from household waste and bring to any point of sale or collection.

WARNINGS


To prevent corrosive liquid leakage from damaging the remote control, it is advisable to remove the batteries if you believe you will not use the device for a long time. Avoid using different types of batteries such as new and used batteries at the same time.

First installation

Connect the antenna cable (terrestrial and/or satellite) and the ethernet cable (if available).
After turning on the TV, perform the first installation as from wizard, use the arrows and OK keys to select and confirm:
Step 1,2,3,4. Language/Country/Password/Time Zone Choice;
Step 5. Connecting to the network (cable or wireless)’;
a. Cable: the connection to the network is established without any kind of intervention;
b. Wireless: Select use WiFi, then choose the WiFi network you want to connect to the TV and enter the password (press OK to invoke virtual keyboard), confirm selecting Connect;
Step 6. APP “E-Share”, use the QR Code to download and install the app;
Step 7. Choosing the startup mode/source;

WARNINGS


The system does not accept the value “0000” as the password. The E-Share app has to be installed on the mobile device (e.g. smartphone), to properly works the mobile device and the Smart TV need to be connected to the same network. The application does not completely replace the traditional remote control, it is made mainly to use the Smart features of the TV (applications, mediaplayers, etc…). Some applications require the use of a keyboard and/or mouse; in this case the traditional remote control provided with the TV is not sufficient to control them

Main functions

Digital TV mode

Channel Search:

  1. Go to the Channel menu;
  2. Select the source from the Antenna Type (Earth, Cable, or Satellite) entry;
  3. Select the Scan item;
  4. Define the search parameters according to the antenna system and/or preferences;
  5. Start scanning

NOTE


If you choose to use the LCN (terrestrial) or TivùSat (satellite) function, a channel list with a predefined sort order will be created at the end of the search. Viewing encrypted channels requires the use of a dedicated conditional access module (CAM) and its smart-card (CA) to be purchased separatel

Selecting channels:
At the end of the scan a channel list will be created for each source, the channel lists can be consulted individually after the selection of the source, for example:

  1. Terrestrial Channels: Access the Channel/Antenna Type menu and set Terrestrial
  2. Satellite Channels: Access the Channel/Antenna Type menu and set Satellite
Smart (Home) mode

The Home menu, also accessible directly from the Home button of the remote control, allows you to access the following features: – Application management and use;

  • Navigation browser,
  • Selection of input sources/modes:
  • Access to application store for apps download and installation.
  • Access to the Multimedia menu for playing audio/video content from USB external memory devices or for files managing saved in the INTERNAL memory of the TV, such as. installation from APK files (for advanced users only).
  • Access to the system settings
System Settings

Accessible from the Home menu, allows you to configure:
– Network settings (network connection via LAN or Wireless);
– Time setting for adjusting the time and its parameters;
– Common settings, for general changes such as language, keyboard type, permission/account management;
– Info, to get system information (HW/SW version, MAC address, memory, GPU…).

WARNINGS


To take advantage of SMART TV features, you need to connect your TV to the internet.

Advanced functions

Antenna system configuration (Sat)

The default settings include the configuration of a single LNB fixed antenna system, receiving the signal from the Hotbird 13-E satellite.
In the case of different antenna system, you need to change the configuration, modifing the parameters in the Channels/Scan menu.

NOTES AND WARNINGS


The TV is compatible with universal single converter, multi-satellite DiSEqC (1.0 – 1.1 – 1.2 – 1.3) and multi-user SCR/Unicable systems. Incorrect antenna configuration can result in some or all channels not loading. we recommend that you contact a professional installer for installation. The Signal Level and Quality indicators refer to the selected satellite Trasponder on the screen. Make sure that it is valid/updated and really active. It is not recommended to avoid connecting the TV to the satellite signal via the via- the-radar antenna connector (LNB Out/Loop Through) of an external satellite receiver because both devices cannot operate at the same time. In the case of a system with LNB SCR: each TV/receiver connected to the same system must use a different SCR channel. To connect multiple receiving devices to an SCR system, do not use the loop through antenna connection of an external satellite receiver, but use a dedicated external signal party.

Factory reset (reset)

Resets all settings to the initial condition.
Accessible from the Home menu > Settings > Common > System Restor

WARNING


Restoring factory settings clears all customizations made by the user, including stored channels, downloaded applications, and changed settings. In addition, confirming the reset, the TV will perform a full system restart, then display the first installation wizard on screen

Technical specifications

Panel Format 31,5” – 16:9 wide (80 cm)
Resolution 1366×768 (HD)
Contrast 3000:1
Brightness 180 (cd/m2)
Viewing angle 178°/178° (Horizontal/Vertical)
Inputs HDMI x3 – HDMI
A/V in x1 – CVBS + Audio LR
USB x2 – USBv2.0, compatible FAT32e NTFS, Media player function
VGA x1 – DSUB15 + Audio PC
LAN x1 – RJ45, Ethernet 10/100

TV Signals

| RF input (DTT)| x1- 75 Ω, type IEC, VHF/UHF 7MHz/8MHz
RF input (SAT)| x1 – 75 Ω, F type
Common Interface| x1 – CI / CI+
Video| MPEG-2, MPEG-4, H.265.Main@L4.1-1920*1080@50fps
Audio| MPEG-1 layer 1/2, MPEG-2 layer 2/Dolby AC3 H.265
Speaker| 10W x2 + 10W x2
General| Power Supply| 100-240V, 50/60Hz
Power Consum| <0,5W in Standby; 56 W max
USB supported| AVI/MP4/MKV, WenM, 3GPP, MPEG transport stream
Wi-Fi| IEEE b/g/n, 2,4GHz
TV dimension s| with supports| 732 x 512 x 196 mm (WxHxD)
without supports| 732 x 470 x 75mm (WxHxD)
Standard wall bracket| VESA 200/100
Included Accessories| x1 standard remote control, x1 instruction manual

Simplified EU conformity declaration

he manufacturer, TELE System Digital s.r.l.., states that the radio equipment type of SMART TV named SONIC32 SMART complies with the 2014/53/EU directive. The full text of the EU compliance declaration is available at the following Internet address: https://www.telesystem.it/CE

28000176 SONIC32 SMART

Per informazioni dettagliate, si invita a visitare il sito di TELE System Digital Srl
For detailed information, please visit the TELE System Digital Srl website

Coperto da una o più rivendicazioni dei brevetti elencati in patentlist.hevcadvance.com.
Covered by one or more claims of the patents listed at patentlist.hevcadvance.com

TELE System Digital Srl
Via dell’Artigianato, 35
36050 Bressanvido (VI)
Website:www.telesystem-world.com

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals