TAOTRONICS TT-DL23 Portable LED Table Lamp User Guide
- June 5, 2024
- TaoTronics
Table of Contents
TT-DL23 Portable LED Table Lamp
User Guide
Product Diagram
| 1 Handle | 4.Charging lput Port |
|---|---|
| 2 Brightness Control Button | 5. Charging Status Indicator |
| 3. Lamp Body | 6. Reset Button |
Package Contents
- 1x TaoTronics LED Table Lamp (Model TT-DL23)
- 1Charging Cable
- 1x Cleaning Cloth
- 1 User Guide
Specifications
| Model | TT-DL23 |
|---|---|
| Input | DC 5V-1A |
| Power Consumption | 6W |
| Color Temperature | 3000K-3500K |
| Light Angle | 360° Uniform Lighting |
| Luminous Flux | 300 I’m |
| Battery Capacity | 4000mAh |
| CRI | >80 |
| Operation Temperature | -20°C to 45°C (- 4°F to 113°F) |
How to Use
Light On/ Light Off
Tap on the Brightness Control Button to turn on / off the light
Brightness Control
Press and hold down on the Brightness Control Button to adjust the brightness
of the light. The brightness will increase/decrease accordingly.
Charging
When charging, the charging status indicator will turn red. When fully
charged, the indicator will turn blue. When the battery level is low, the
indicator will flash red.
Caution
- Please do not repair the product by yourself, always ask a professional electrician or authorized technician for repairs.
- If you smell a bad odor or anything unusual, please turn off the unit immediately.
- Please do not remove the charging cable with wet hands as it may cause electrical shock.
- Do not put this unit near an extreme heat source, moisture, or corrosive substance.
- Regularly clean the lamp.
- Please store the lamp in a dry and shady place if it is not being used for a long period of time.
Troubleshooting Guide
| Problem | Possible Cause | Solution |
|---|---|---|
| The lamp does not light up | No power supply | Power on correctly |
| The touch panel is not responsive | Wet hand | Touch the Brightness Control |
Button with dry hands
Voltage fluctuation| Press the Reset Button
LED failure| LED component fails| Please contact the TaoTronics Support Team
Bad smell| Charging cable fails
Short circuit
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories, or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal.
TECHNOLOGY ENHANCES LIFE
www.taotronics.com
E-mail:
[email protected]
MANUFACTURER
Manufacturer Shenzhen NearbyExpress Technology Development Co.Ltd
Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China
Learn more about the EU Declaration of Conformity
https://www.taotronics.com/pages/user-manual
MADE IN CHINA
Documents / Resources
|
TAOTRONICS TT-DL23 Portable LED Table
Lamp
[pdf] User Guide
TT-DL23, Portable LED Table Lamp, TT-DL23 Portable LED Table Lamp
---|---