TELTONIKA Networks RUT956 Industrial 4G LTE Router User Guide
- June 13, 2024
- TELTONIKA Networks
Table of Contents
TELTONIKA Networks RUT956 Industrial 4G LTE Router
Product Information
The product is equipped with RF technologies that allow for maximum RF
power. It includes a power adapter, mobile antenna, WiFi antenna, and GNSS
antenna.
Technical Information
Radio Specifications:
- 2G, 3G, 4G, WiFi, GNSS
- 33 dBm@GSM
- 24 dBm@WCDMA
- 23 dBm@LTE
- 20 dBm@WiFi
Bundled Accessories Specifications:
- Input: 0.45A@100-240 VAC
- Output: 9 VDC, 1A, 4-pin plug
- 698~960/1710-2690 MHz
- 50 n, VSWR
Product Usage Instructions
To use the product, follow these steps:
- Connect the power adapter to an electrical outlet.
- Plug the power adapter’s 4-pin plug into the designated port on the product.
- Attach the mobile antenna to the appropriate port on the product.
- Attach the WiFi antenna to the designated port on the product.
- Connect the GNSS antenna to its assigned port on the product.
Once all the accessories are connected, you can start using the product for various purposes such as utilizing the RF technologies for 2G, 3G, 4G, WiFi, and GNSS functionalities. Please refer to the user manual for further details and instructions on configuring and optimizing the product’s performance.
APPLICATION
RUT956
// v2.0
QUICK START GUIDE
Scan the QR code for instructions
teltonika-networks.com/QSG_RUT956
SCAN ME
TRY FOR FREE
EXTEND YOUR DEVICE CAPABILITIES WITH REMOTE MANAGEMENT OPTIONS!
Scan the QR code to start your free 30-day RMS experience teltonika-
networks.com/product/rms/
TECHNICAL INFORMATION
COMPLIANCE INFORMATION
RUT956 router must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.
Simplified EU and UK Declaration of Conformity
Hereby, TEL TON I KA NETWORKS declares that this RUT956 is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU and with Radio Equipment Regulations 2017.
The full text of the EU and UK Declaration of Conformity is available at the
following Internet address: wiki.teltonika-
networks.com/view/Certificates
Detailed compliance information is available at the following internet
address: wiki.teltonika-networks.com/view/Certificates
FCC
This device complies with part 15 of the FCC Rules. Operation Is subject to the following two conditions:
- This device may not cause harmful Interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Detailed compliance i nformation is available at the following internet address: wiki.teltonika-networks.com/view/Certificates
IC
Warning reference (RSS-Gen 6.8)
This radio transmitter [enter the device’s ISED certification number] has been
approved by Innovation, Science and Economic Development Canada to operate
with the antenna types listed below, with the maximum permissible gain
indicated. Antenna types not included in this list that have a gain greater
than the maximum gain indicated for any type listed are strictly prohibited
for use with this device.
Order code dependent.
Higher gain antenna can be connected to compensate for cable attenuation when
a cable is used. The user is responsible for the compliance with the legal
regulations.