BLUETTI 17.0303.0344-01 EB55 Portable Power Station User Manual

: June 10, 2024
: Bluetti

Table of Contents

BLUETTI 17.0303.0344-01 EB55 Portable Power Station
Important Safety Instructions
Maintenance Instructions
What’s In The Box
Product Overview
Speciﬁcations
Operation
Discharging
Appendix
Technical Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLUETTI 17.0303.0344-01 EB55 Portable Power Station

Thank You

Thank you for making BLUETTI a part of your family.
From the very beginning, BLUETTI has tried to stay true to a sustainable future through green energy storage solutions for both indoor and outdoor use while delivering an exceptional eco-friendly experience for our homes and our world.
That’s why BLUETTI makes a presence in 70+ countries and is trusted by millions of customers across the globe.

Before You Begin

The information contained herein is subject to change without notice.
For the latest version, please visit https://www.bluettipower.eu/pages/manuals.

The user manual contains instructions and notes on the operation and use of this unit.
BLUETTI recommends that you use genuine accessories from BLUETTI.
BLUETTI shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts from BLUETTI.
For your safety and beneﬁt, please read carefully before using it and keep it handy for future reference.

Important Safety Instructions

BLUETTI products are developed to be safe and reliable. Please read this guide for important safety information about your device. The guide is intended to help you be more comfortable and productive while using this device. Failure to follow these guidelines for proper setup, use, and care for your device may cause damage to this unit and injury to yourself or others. SAVE THESE INSTRUCTIONS!

Always operate or store the unit in accordance with speciﬁed temperature range.
DO NOT expose the unit to ﬁre, liquids, sweat, dirt, or other contaminants, as that may cause the battery to explode or leak ﬂammable liquid or gas.
DO NOT place the unit on an unstable or tilted surface.
Make sure the place where you are using the unit is well-ventilated and spacious.
Keep away from children and pets.
DO NOT modify, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids. Batteries may explode if damaged.
Battery ﬂuid is corrosive and may be toxic. If a battery leaks, keep the leaked ﬂuid from touching your skin, eyes, clothes, or other surfaces. Immediately ﬂush the affected areas with water, or seek medical help.
DO NOT ignore those warning signs on components or products made by manufacturers.
DO NOT dismantle, cut, crush, puncture, or otherwise damage the unit in any way.
DO NOT insert foreign objects into the fan, vents, ports, or other openings.
NEVER use a damaged battery or component. Improper use or misuse of damaged batteries may cause damage to your device or injury to yourself as a result of battery ﬂuid leakage, ﬁre, overheating, or explosion.
Use approved batteries and accessories ONLY. Improper use or use of unapproved or incompatible batteries or components may result in a risk of ﬁre, explosion, or other hazard, and may invalidate any approval or warranty.
Turn off the unit IMMEDIATELY in case of malfunction.
Use dry powder ﬁre extinguisher in case of ﬁre.
DO NOT attempt to modify, or replace the internal battery or any other component of the unit by anyone other than qualiﬁed personnel. If necessary, take it to an authorized service center as incorrect reassembly may result in a risk of ﬁre or electric shock.

Maintenance Instructions

When not using the unit for extended periods of time, power off the unit and disconnect the AC adapter from the outlet.
Charge the unit to 80% SOC every 3-6 months for long-term storage.
Clean the unit with a dry cloth gently and carefully.

Handling and Storage Instructions

Use mechanical assistance as needed (e.g. trolleys and adjustable height workbenches).
DO NOT stack anything on top of the unit either in storage or in use.
Recommended storage temperature: 14-113°F/-10-45℃.

What’s In The Box

Standard Packaging

Below accessories are not included in standard packaging and can be purchased separately.

AC Adapter: 47in/120cm.

Car Charging Cable: 28in/72cm. XT60 to Cigarette lighter port.
Solar Charging Cable: 59in/150cm. XT60 to MC4.
DC7909-XT60 Female Cable: 20in/50cm. DC7909 to XT60.

Note: Package details are subject to change without prior notice.

Product Overview

Diagram

DC Input
Adapter Input
LCD Screen
Wireless Charging Pad
DC 12V Power Button
DC5521 Port
Cigarette Lighter Port
DC Power Button
USB-A Port
USB-C Port
AC Power Button
AC Output

Speciﬁcations

EB55

Cigarette Lighter Port *1

| Voltage| 12VDC
Current| 10A (Cigarette Lighter and DC5521 10A total)

DC5521 *2

| Voltage| 12VDC
Current| 10A total (Cigarette Lighter and DC5521 10A total)

USB-A *4

Operation

LCD Screen

ECO Mode
Battery Capacity
Input Power
Low-battery Alert
Temperature Anomaly Alert f: Output Power
Overload Alert
Short-circuit Alert

Powering On/Off
Powering on: Press the AC/DC/DC 12V Power Button to start up the corresponding output.

Greenlight(on the button)	ON
LCD Display	ON*

The LCD screen is on for 30-60 seconds. Please enable at least one of these ports (AC/DC/DC

12V) if you want the display to stay on longer.
Note: Please turn on the DC power to enable wireless charging.

Powering off: Press and hold power buttons to shut down the corresponding output.

Greenlight(on the button)	OFF
LCD Display	OFF

Mode
Setting Mode: When the AC output is off, press AC and DC power buttons simultaneously, and the frequency indicator ﬂashes.
ECO Mode1: Under ‘Setting Mode’, press the DC power button to turn it on/off.

Setting

AC Frequency 2: Under ‘Setting Mode’, press the AC power button to switch.

Charging
AC Charging Simply plugs the EB55 into a standard wall outlet and start charging.

When in this mode, the AC/DC output will automatically turn off after a 4-hour low (≤10W for AC, ≤1W for DC) or no load to save power.
AC Frequency: The number of alternating cycles per second in an AC sine wave. The utility frequency is usually 50/60Hz.

PV Charging
Connect the solar panels (in series or parallel) to EB55 via the solar charging cable. Note: Please make sure your solar panels comply with:
OCV3: 12-28V Input Current: 8A Max. Input Power: 200W Max.

Car Charging
Connect the EB55 directly to the vehicle plug-in cigarette lighter port via the car charging cable.

OCV: Open circuit voltage. The maximum voltage that the solar panel can produce with no load on it.

Generator Charging
Connect the AC adapter input plug to the generator while the output plug goes to the DC charging port of EB55.

Dual Charging
EB55 also supports dual charging. (e.g. Adapter+ PV Charging and Dual Adapter Charging).

An extra adapter (200W AC Adapter + DC7909-XT60 Female Cable) is needed for Dual Adapter Charging.

Discharging

537Wh × DoD × η ÷ (load power) = charging time (estimated)

Note: DoD refers to the Depth of Discharge, η is the local inverter efﬁciency. DoD=90%, η=90%. Load power and charging time are measured in watts and Hours.

Appendix

FAQs (Frequently Asked Questions)

Q: How do I know whether my devices will work well with this product?
A: Please evaluate the total constant load of your appliances. If it doesn’t exceed the Max. the output power of EB55, you can use this power station to charge.
Q: Can I use third-party solar panels to charge this product?
A: Yes, you can. As long as the specs of solar panels you’re using fall in below range:
OCV: 12-28V
Input Current: 8A Max.
Input Power: 200W Max.
With the same power connector (MC4 or Anderson)
Q: How can I charge this EB55 with dual adapter charging?
A: An extra adapter (200W AC Adapter + DC7909-XT60 Female Cable) is needed to connect to the DC input port.
Q: Is there a button to turn on/off the wireless charging?
A: Yes. Press the DC Power Button to enable wireless charging.
Q: Can it charge and discharge at the same time?
A: Yes. It supports pass-through charging. EB55 comes with the premium LiFePO4 battery and proprietary Battery Management System to ensure that it can charge and discharge at the same time.

Technical Support

Should you require any further assistance, please do not hesitate to contact the BLUETTI service team.

BLUETTI POWER INC

Mail: sale-eu@bluettipower.com.
Add: LindwurmstraBe 114, 80337 Munich, Germany.

Manufacturer:

Company name: Shenzhen PowerOak Newener Co.,ltd
Address: F19, BLD No.1, Kaidaer, Tongsha Rd No.168, Xili Street, Nanshan, Shenzhen, China
Company registration No.: VAT No.:91440300071761480R
Tel: 0086-755-23705980
E-Mail: feedback@poweroak.net.

UK Kontakt