TAOTRONICS TT-CL026 LED Stand Light User Guide
- June 5, 2024
- TaoTronics
Table of Contents
TT-CL026 LED Stand Light
User Guide
Thank you for choosing the TaoTronics LED Stand Light Please read this User
Guide thoroughly before use and retain it for future reference.
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INFORMATION AND INSTRUCTIONS. KEEP FOR FUTURE
REFERENCE.
CAUTION
- To ensure correct and safe usage and functioning of the product, always follow these instructions carefully and keep for future reference.
- Please keep the light away from water or any other liquid to avoid electrical shock.
- Do not look directly into the light to avoid any injuries.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Do not allow it to be used as a toy. Close attention is necessary when used by or near children.
- Children should be supervised to ensure that they do not play with the product or remote shutter.
- Do not operate any light with a damaged cord or after a malfunction occurs, or damage in any manner. Discard the light, or return it to an authorized service facility for examination or repair.
- Keep away from heat and avoid direct sunlight.
- Do not try to repair or dismantle the light by yourself.
- Keep the equipment out of reach of children or infants, and avoid strangulation caused by the adapter cable.
- Switch off the device when it is not in use.
- Switch off the device before assembly and maintenance and disconnect from the power supply by unplugging the USB power cord.
- Do not operate the device with wet hands.
- Follow local ordinances and recycling instructions regarding disposal or recycling of the device and device components. If you have any product problems or report an unexpected situation during use, please contact Customer Support at support® TaolVonIcs.com.
- THIS IS AN ELECTRIC LAMP – NOT A TOY! TO AVOID THE RISK OF FIRE, BURNS, PERSONAL INJURY AND ELECTRIC SHOCK IT SHOULD NOT BE PLAYED WITH OR PLACED WHERE SMALL CHILDREN CAN REACH IT
READ AND SAVE THESE INSTRUCTIONS
Features
Your new TaoTronics LED Stand Light is a perfect light source for portrait and beauty photography with many features and benefits:
- 3 Color Lighting Modes: Cool White, Warm White, and Warm Yellow
- Stepless adjustment of color temperature and brightness
- Upgraded tripod stand for increased stability
- Adjustable phone holder, compatible with almost every smartphone
- 360° rotation for any shooting angle without limitations
- Bluetooth Remote Shutter for an easy shooting experience
IN THE BOX
Knowing Your Stand Light
Assembly Instruction (Tripod)
Assembly Instruction (Ring Light) **
Assembly Instruction (Ring
Light)**
Assembly Instruction (Tripod Mount Phone Holder) 
Assembly Instruction (Flexible Phone Holder) – Optional
Using Your Stand Light Getting Stated
- Place the stand light on a Rat and stable spine.
- Connect the USB power port (5V = 2A) to any USB charging adapter, power bank, or active computer USB port. The power indicator on the controller will light up blue.
Using Your Stand Light
Power ON / OFF
Brightness Adjustment
- When the: tend light o on. repeatedlypeas + or — to adjust the brightness by step (10%-100%/.
- Or press and hold + or — to steplessly adjust the brightness.
Lighting Maki Sating
- When the stand light is on. repeatedly press 4’1 to cycle through Cool White.> Warm White.> Warm Yellow Lighting modes.
Winans Control
A Bluetooth remote shutter P provided for an easy shooting experience with
both OS and Android phones (effective coverage of 10nV30 foot? You can easily
control the phone to take selfies and record videos using one
hand.
- Toggle the switch to ON, and the remote shutter is turned on with the LED indicator flashing blue eddy.
- Turn on the Bluetooth function on your phone and search for nOoTronicsSelfiet tap on the name to connect. Once connected. the LED indicator will turn off.
- Turn on the Camera on your PhOne, and then press the corresponding Camera Button (L0S or Andmed)to take phc4on
Note: If pairing failed or no operation is done in 10 minutes, the remote shutter waterway standby for mode. Press the Camera Button once again to wake it up.
Cleaning and Maintenance
- Always unplug the USB power port before cleaning.
- To avoid the risk of electric shock, do not clean the die stand light or the power cord with water and do not amine them
- Clean the standing fight or tripod stand with a soft damp cloth on a regular basis.
- When not In use for a long period of time, a Is recommended to detach the stand light and then store the stand light and tripod stand in a cool, dry location.
Caution
- Do not disassemble the device without authorization.
- Do not stone the product in a high-temperature environment
- For enough brightness, please ensure an input power of 5V= 2A by USEI power supply.
- To avoid any damage to the tripod stand, do not plate excessive force on a.
- When basting the tripod stand make sum the knob is unscrewed and the buckles are unlocked. When using the tripod stand, make sure the knob is tightened and the buckles are locked.
Troubleshooting
The following troubleshooting guide addresses the most common problems. If problems persist, contact the Customer Support at [email protected]
| Problem | Possible Cause | Solution |
|---|---|---|
| Not enough brightness | Insufficient input power | For enough brightness, |
please ensure an input power of SV= 2A by the USB power supply.
The stand light does not light up| No power supply| Correctly connect to an
active power port
The stand light is not turned on| Refer to the Using Your Stand Light section.
LED failure| LED component failed| Please contact the TaoTronics Support Team.
The tripod stand is not stable| Not correctly installed| Make sure the knob is
tightened and the buckles are locked to its place.
Specifications
| Model | TT-CL026 |
|---|---|
| Ring Light Size | 10 inch |
| Power | 10W |
| Input | USB 5V=2A |
| LED Qty | 96 |
| Lifespan | >20000 Hours |
| Tripod Stand Extendable Height | 420-1550mm/16-61inch |
| Color Temperature | Cool White: 5800K-6500K |
Warm Yellow: 2700.3300K
Warm White: 4100-4700K
Remote Battery| CR2032, 3V
Warranty
Taorronics products are covered by a 12month knotted warranty from the date Sits original purchase. If any problems ccoar please contact Taotronics Customer Caro Centro via the contact information listed in this User Guide.
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
E-mail: supportetaotronics.com
MANUFACTURER Manufacturer:
Shenzhen NearbyExpress Technology Development Co.,Ltd.
Address: Floor 7, Building E,
Galaxy World Phase II, Shenzhen, China
Made in China