TRIPP-LITE N785-INT-SC-SM 1000M Ethernet Optical Fiber Singlemode Media Converter Owner’s Manual
- June 5, 2024
- Tripp Lite
Table of Contents
TRIPP-LITE N785-INT-SC-SM 1000M Ethernet Optical Fiber Singlemode Media Converter
Package Includes
- N785-INT-SC-SM
- International Power Supply (Input: 100-240V)*
- Owner’s Manual
*Includes NEMA 1-15P (North America), CEE 7/16 Schuko (Europe), BS 1363 (U.K.) and AS/NZS 3112 (Australia) plugs
Product Features
- Extends your copper Ethernet network beyond the 328 ft. (100 m) limit while maintaining speeds of 1000 Mbps up to 12.4 mi. (20 km)
- Supports IEEE 802.3ab 1000Base-Tx & IEEE 802.3z 1000Base-Fx protocols
- Auto identification of MDI/MDI-X
- Full-duplex and half-duplex mode support
- LED indicators monitor the Ethernet and Fiber link status of the media converters
Optional Accessories
- N001-Series Cat5e Snagless Patch Cables
- N201-Series Cat6 Snagless Patch Cables
- N356-Series Duplex Singlemode 8.3/125 Fiber Patch Cables (SC/SC)
Installation
Note: To avoid damage due to Electrostatic Discharge (ESD), it is recommended you handle the product while wearing an ESD wrist grounding strap or by touching a conductive surface (such as metal) to discharge any potential ESD prior to handling the product.
-
Using a Cat5e/Cat6 cable, connect the RJ45 port on the N785-INT-SC-SM media converter to your network.
-
Using an appropriate fiber cable, connect the N785-INT-SC-SM media converter to a second N785-INT-SC-SM or another identical (1310 nm/singlemode/1000M/20 km) media converter, ensuring the TX port of one unit is connected to the RX port of the other. Tripp Lite’s N356-Series Duplex Singlemode 8.3/125 (SC/SC) cables are recommended.
Note: Simplex singlemode 9/125 fiber patch cables are also supported. Two simplex cables are required for each installation. -
Using a Cat5e/Cat6 cable, connect the RJ45 port on the second N785-INT-SC-SM media converter to your network device (workstation, hub, switch, etc).
-
Connect the included external power supplies to each media converter.
Installation
LED Status Table
| LED | Function | Status | Description |
|---|---|---|---|
| DUP | UTP port duplex LED | ON | Unit is operating in Full- Duplex Mode |
| OFF | Unit is operating in Half- Duplex Mode | ||
| FP-LINK | Fiber port link/ action status LED | ON | Fiber signal/link is detected |
| OFF | No fiber signal/link is detected | ||
| PWR | Power LED | ON | Unit is powered ON |
| OFF | Unit is not powered ON | ||
| RX | UTP port link/ action status LED | ON | UTP link is detected |
| Blinking | UTP data transmission is taking place | ||
| OFF | No UTP link is detected | ||
| 1000 | UTP port speed LED | ON | 1000 Mbps speed |
| OFF | No 1000 Mbps speed | ||
| TX | Fiber port link/ action status LED | ON | A link is detected between the |
connected fiber ports
Blinking| Fiber data transmission is taking place
OFF| No link is detected between fiber ports
Specifications
| Optical Wavelength | Singlemode (1310 nm) |
|---|---|
| Optical Ports | SC |
| Network Speed | 1000 Mbps |
| Transmission Distance | Singlemode Duplex Fiber (1310 nm): 12.4 mi. / 20 km |
| Duplex Mode | Full / Half (Auto-Detect) |
| Optical Output Power Range (dBm) | -9 to -3 |
| Optical Input Power Range (dBm) | <-22 |
| Power Budget (dBm) | 7 |
| Operating Temperature Range | 32° to 122°F / 0° to 50°C |
| Storage Temperature Range | -4° to 158°F / -20° to 70° C |
| Relative Humidity | 5% to 90% RH, Non-Condensing |
| Unit Dimensions | 1.02 x 3.7 x 2.76 in. / 26 x 93 x 70 mm |
| Unit Weight | 0.4 lb. / 0.18 kg |
Warranty and Product Registration
2-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of two (2) years from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This warranty does not apply to equipment, which has been damaged by accident, negligence or misapplication or has been alteredor modified in any way
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.
PRODUCT REGISTRATION
Visit tripplite.com/warranty today to register your new Tripp Lite product.
You’ll be automatically entered into a drawing for a chance to win a FREE
Tripp Lite product!*
- No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.Warranty and Product Registration
Warranty and Product Registration
WEEE Compliance Information for Tripp Lite Customers and Recyclers
(European Union)
Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:
- Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country).
- Send the new equipment back for recycling when this ultimately becomes waste.
Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not recommended.
Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
1111 W. 35th Street, Chicago, IL 60609 USA •tripplite.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>