InnoGear Adjustable Mic Stand for Blue Snowball and Blue Snowball iCE Suspension Boom Scissor Arm Stand with Microphone-Complete Features/Instruction Guide

InnoGear Adjustable Mic Stand for Blue Snowball and Blue Snowball iCE

Suspension Boom Scissor Arm Stand with Microphone

Specifications

• DIMENSIONS : 16.18 x 7.64 x 2.56 inches,
• WEIGHT : ​ 2.53 pounds,
• Material :  Sponge,Foam
• COMPATIBILITY : AT2020 mic, AT2020USB+, Blue Snowball Ice, Blue Snowball, etc.,
• MANUFACTURER : InnoGear

The InnoGear MU059 comes with a shock mount that protects the microphone and avoids sound splits. The diameter of the shock mount is 52mm, which is quite large and it features a rope design. The microphone stand is rigid and robust and has an extra-strong spring which prevents accidental dropping of the mic. It also features a screw that allows adjustable positioning and has a thickness of 2 inches. MU059 comes with double-screen pop filters. It is mainly used to eliminate audio split. The first filter is used to block air blasts like other normal filters. The additional second filter is used to remove any remaining air pressure.
It also comes with cable ties that are perfect for putting the microphone cables in order. The stand can bear a load of about 3.3 lb. It includes one mic clip which makes it suitable for many microphones such as Shure SM58, Samson Q2U, etc. The stand features a 360 degrees rotation at the clamp. The arms of the MU059 can be extended to 135 degrees back and forth and 180 degrees vertically.

What’s in the Box?

• Shock Mount x 1
• Arm Stand x 1
• Pop Filters x 1
• Table Mounting Clamp x 1
• 3/8” to 5/8” Metal Screw Adapter x
• 1 Five Cable Ties x 1

How to install the InnoGear MU059 Microphone Stand?

1.  First of all, unscrew the table mounting clamp.
2. Place the opening of the clamp to fit your table.
3.  Tighten the screw of the clamp.

• What is the Maximum Vertical Reach of the Stand?
  The arms can be extended to an angle of 180 degrees vertically.

• What is the Maximum Horizontal Reach of the Stand?
  The arms can be extended to an angle of 135 degrees horizontally.

• What is the Maximum Weight the stand can withhold?
  It has the capability to handle a maximum load of 3.3lb.

FREQUENTLY ASKED QUESTIONS

• Will the arm and shock mount accommodate the Fifine K670 mic?
  Yes, they work completely fine with Fifine K670 mic.

• Does it fit the Hyper X Quantcast?
  Yes, it is compatible with Hyper X Quadcast.

• Will this work with the Scarlett studio mic?
  Yes, it works completely fine with Scarlett studio mic.

• Will the shock mount work with the Blue Yeti Nano?
  No, it doesn’t work with Blue Yeti Nano.

• Is it compatible with Camson C01?
  The MU059 works completely fine with Camson C01.

• Does this fit the KSM27?
  This product works with Shure KSM27.

• Is the stand and shock mount fit for the Apogee Hyperemic microphone?
  It is recommended.

• Can you use a Personas M7 with this shock mount?
  The shock mount of the MU059 is tiny and plastic therefore it isn’t recommended.

• Does this fit on a TC-777?
  The MU059 is compatible with all standard boom arms that come with 5/8” male screw.

• Does this work with Fifine K690?
  Yes, it works completely fine with Fifine K690.

• My mic is a condenser with a 1-inch diameter, could it still fit?
  No, 1 inch is too large for the microphone. The shock mount fits microphones that feature an outer diameter of 35-52mm.

• Is it compatible with the Elgato wave 3 mic?
  Yes, it is compatible with Elgato Wave 3 mic.

• Will this work with the XML 67G HE?
  Yes, it is compatible with MXL 67G HE.

• Will this work with TC-777?
  The MU059 microphone comes with a 5/8 male screw therefore yes it works with TC-777.

• How do you set this up to work with the Hyperx Quantcast?
  Secure the included mount adapter onto a microphone boom arm. The mount adapter supports 3/8” and 5/8” thread sizes.
  Remove both the thumbscrew and nut from the microphone stand.
  Remove the microphone stand from the microphone.
  Align the mount adapter with the microphone mount holes and secure the adapter with the thumb screw=

• Does this stand swivel?
  Yes, it can. The arm sits in a clamp. There is a screw that keeps the arm moving back and forth in one direction, but, at least with a Blue Snowball, you can leave that screw a little loose and the pipe that is allowing the arm to sit in the clamp is long enough and properly fitted that it does not fall over or wiggle/wobble and can swivel 180 degrees nicely. I say 180 degrees because when I tried to swivel more than that, essentially off the table, it did lean a little. Hope this helps

• How long is the arm?
  About 35inches

• would this work with the Razer Seiren Mini?
  You can use the 3/8 to 5/8 adapter in the product image to support your Razer Seiren Mini.

• Can I use this for a hyper x quad cast?
  Yes, this mic stand includes the adapter that you would need to hook up the mic to the stand.

• what is the minimum width that the ledge needs to be for the clasp to grab?
  I have mine clamped to my tempered glass computer desk so far with no issues.

• does this work with the yeti nano?
  Yes it does

• Do you use both pop filters?
  your choice. i have a fan sitting by my side in the summer and either one of the pop filters do the job even when the fan is at the highest setting.

• Will this work with a Fifine K678?
  Yes. This product could work with the Fifine K678.

• can this stand to hold an MXL 990?
  Yes

• Does this fit Aokeo AK 60?
  Yes, but it requires the shock mount from the microphone. Please verify if you need a 5/8” threading adapter in the package.

• What material is the table mounting clamp made of? plastic or metal?
  Plastic

• Does it minimize a loud pc fan?
  Yes

• Does this work with the bluebird microphone?
  Yes, it fits.

• Does this work with the fine mic
  Yes

• Does this work with the at2020?
  Yes

• does the screw-on adapter comes included as well?
  Yes. The adapter should be there. I haven’t had any issues with the adapter fitting and staying connected.

• Do I need any special screws or add-ons to use a blue yeti on this boom arm, as in can I just screw it in or do I need adapters or screws to use it?
  It comes with an appropriate adapter

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>