InnoGear Microphone Arm Stand, Heavy Duty Mic Arm Microphone Stand-Complete Features/Instructions

InnoGear Microphone Arm Stand, Heavy Duty Mic Arm Microphone Stand

• DIMENSIONS : 17.44 x 8.66 x 2.05 inches
• WEIGHT : 3.16 pounds
• BEARING CAPACITY: 3.5lbs
• SCREW TYPE: 5/8”
• MANUFACTURER: Gear Keeper

InnoGear is one of well-known manufacturers of music accessories. It has a series of microphone arm stands suitable for different uses and compatible with different types of microphones.

Introduction

The InnoGear microphone stand has a premium cast material. Its design is very sturdy which allows it to hold the microphone without shaking. One of its noticeable design features is that all the springs of this stand are present on the inside. It is made of steel material, with 360 degrees rotation angle and is easy to assemble.

The inner side of the clamp which swivels on your table has a soft sponge. This protects your table from scratches providing a better user experience. The InnoGear Microphone Arm stand comes with 5 cable ties. They allow you to hold the microphone cable in place without creating a mess.

The InnoGear stand features a 5/8” screw which allows it to connect most of the popular microphones for examples; Blue Snowball iCE, HyperX QuadCast, NW-700, Shure SM58, Fifine K669B, Razer Seiren X, Shure SM7B and Audio- Technica AT2020.

What’s in the Box?

• Clamp x 1
• InnoGear Microphone Arm x 1
• Cable Ties x 1

Maximum Load Capacity

It has a maximum load capacity of about 3.5 lb.

Maximum Rotation of the Base

The base of the stand can offer a maximum rotation of 360 degrees.

Maximum Vertical Movement

The metal adapter can be rotated to a max of 270 degrees and the arm can be rotated to 180 degrees.

Maximum Horizontal Movement

The maximum horizontal rotation of the arm is 135 degrees.

How to setup the stand?

1. Unthread the screw of the clamp.
2. Slide it in to the side of your desk.
3. Tighten the screw until it is correctly fastened.
4. There are two sides to the arm stand: one with a black rod and the other with a silver rod. Place the black one in the clamp’s hole.
5. Rotate the wheel on the clamp to fully secure the scissor arm.
6. Attach the adaptor to the scissor arm stand’s silver rod end.
7. Connect the microphone to the 5/8” screw on the silver end of the rod.

FREQUENTLY ASKED QUESTIONS

• Can this rode podmic be screwed into this arm? also, can this hold the rode podmic?
  Yes, the rode podmic can be screwed in to this arm and it can the rose podmic.

• Will this hold the Elgato wave 3 without the shock mount?
  Yes, it will hold the Elgato Wave 3.

• Can this be used with an isolation shield?
  Yes, it can be used with an isolation shield.

• Can the arm be removed from the clamp?
  Yes, the arm can be removed from the clamp.

• I need to use a different clamp for my desk. What minimal size should be the hole on the clamp for the arm to be inserted?
  The diameter of the arm’s base is about 0.5”. Its size should be 0.52” +.

• What is the diameter of the stem that goes into the desk mount? I want to use this stand with a Heil wall mount that accepts a 1/2″ stem.
  It is almost of ½” stem.

• My desk lip is only 1/2 inch. Will I be able to attach this to it?
  Yes, the maximum limit of the clamp is 2 inches, therefore this can easily be used with your desk.

• What’s the farthest it can reach horizontally across a desk for example?
  It can reach up to 3 feet easily.

• My Rhode uses 3.8 screw but this is 5.8 screw. How do you get this to work with your Rhode?
  You will need to purchase 3/8” make to 5/8” female mic screw adaptor for this.

• Will this work for a Rode Procaster and Shock mount?
  Yes, it will work for both.

• Will the clamp on this stand fit a 2″ thick desk?
  The clamp can fit a maximum of 2” thick desks.

• Will this work with the Fifine USB studio recording microphone?
  Yes, it will work with Fifine USB studio recording microphone.

• Does the medium sized boom arm have the capability to hold a Blue Yeti Nano with no problem?
  Yes, it can hold the Blue Yeti Nano finely.

• Does this come with a fixed or screwed in mount?
  The microphone is screwed on the mount.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>