TAOTRONICS TT-DL095 LED Floor Lamp User Guide

www.taotronics.com

Model: TT-DL095
TaoTronics LED Floor Lamp
User Guide

Thanks for choosing TaoTronics LED Floor Lamp. Please read this User Guide thoroughly before use and retain it for future reference.

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL SAFETY INFORMATION AND INSTRUCTIONS. KEEP FOR FUTURE REFERENCE.

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

• To ensure a correct and safe installation, usage, and functioning of the product, always follow these instructions carefully and keep them for future reference.
  • Use only the supplied AC power adapter.
  • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by the person responsible for their safety.
  • Never use any optical devices such as a lens to look directly into the light beam. This can cause eye damage.

• Do not allow it to be used as a toy. Close attention is necessary when used by or near children. Children should be supervised to ensure that they do not play with the product.

• Keep packaging materials out of children’s reach (e.g. plastic bags…). The danger of suffocation.

• Do not operate any light with a damaged cord or after a malfunction occurs,or damaged in any manner. Discard the light, or return it to an authorized service facility for examination or repair.

• Do not place this unit near extreme heat sources, moisture, or corrosive substances.

• Always switch off the power prior to installation, maintenance or repair activities.

• Do not remove the power plug with wet
  hands as it may cause electrical shock.

• If you notice any smoke, unusual noises, or strange smells, turn off the unit immediately and remove the plug from the wall outlet. Stop using the device and check by
  authorized service personnel.

• Do not dismantle the product by yourself, always ask professional electricians or authorized technicians for repair.

• The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.

• Follow local ordinances and recycling instructions regarding disposal or recycling of the device and device components.

• If you have any product problems or report an unexpected situation during use, please contact Customer Support at [email protected].

FOR HOUSEHOLD USE ONLY

READ AND SAVE THESE INSTRUCTIONS

Product Features

Your new TaoTronics LED Floor Lamp is perfect for lighting up your whole room:

• Convenient Remote Control & Controller
• Ultra Extended Lifespan: 50000-Hour Long Lasting LED
• Safe & Stable with a Well Weighed Base
• Easy to Assemble & Move

Knowing Your Floor Lamp

Assembly

|
---|---

Using Your Floor Lamp

Getting Started

Controlling via Controller

Turn ON

• Press once.

Brightness Adjustment

• mWith lamp on, repeatedly short press to cycle through brightness level 1->2->3->4-> OFF.

Color Temperature Adjustment

• With the lamp on, press and hold to steplessly adjust the color temperature.

Controlling via Remote

| Turn-ON/OFF

• Press once to turn on both lamps.
• Press once again to turn it off.

---|---

| Main Lamp Control (ON/OFF/Brightness Adjustment)

• Turn ON: Press once.
• Turn OFF: Press and hold for 1 second.
• With the lamp on, repeatedly short press to cycle through 4 brightness levels.

| Main Lamp Control (Color Temperature Adjustment)

• With lamp on, repeatedly short press to cycle through 4 color temperatures.

| Side Lamp Control (Same set as Main Lamp)
| Side Lamp Control (Same set as Main Lamp)

Charging Remote Control

Adjusting Lamp Head

Specifications

Cleaning and Maintenance

• Unplug the power cord from the power outlet before cleaning.
• To avoid the risk of electric shock, do not clean the base or the power cord with water and do not immerse them.
• Wipe the lamp with a soft damp cloth.
• Clean the unit on a regular basis.
• Please store in a dry and cool place if not used for a long period of time.

Troubleshooting

The following troubleshooting guide addresses the most common problems. If problems persist, contact the Customer Support at [email protected]

power adapter.
The lamp is not turned on| Refer to the Using Your Floor Lamp section.
The touch control panel is not responsive| Hands are wet| Tap the panel with dry hands.
Voltage fluctuation| Disconnect the power adapter to restart the lamp.
LED failure| LED component failed| Please contact TaoTronics Customer Support.
Bad smell| Power adapter failed| Please contact TaoTronics Customer Support.
Short circuit| Please contact TaoTronics Customer Support.
The remote control does not respond to the lamp| The remote control is not paired with your lamp automatically| The remote control is already paired with your lamp by default. If not, please manually pair as instructed below.

1. Press and hold both buttons on Lamp Controller for more than 1 second, both lamps will flash indicating it is under pairing mode now.

2. Press and hold the Power button on Remote Control until both lamps stay solid. Then your lamp is successfully paired with the remote control.

Clear Pairing History| The remote control is missing or more than one remote control are connected|

To disconnect the paired remote control(s),

1. Press and hold both buttons on Lamp Controller for more than 1 second, both lamps will flash.

2. To clear all pairing history, press and hold the Main Lamp button on Lamp Controller for more than 3 seconds until both lamps turn off.

3. To cancel one of the remote controls, press and hold the Power button on Remote Control until both lamps turn off.

Warranty

This product is covered with TaoTronics product and labor warranty for 12 months from the date of its original purchase. If any problems occur, please contact the TaoTronics Customer Care Centre via the contact information listed in this User Guide.
We can only provide after sales service for products that are sold by TaoTronics or TaoTronics authorized retailers and distributors. If you have purchased your unit from a different place, please contact your seller for return and warranty issues.

FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

E-mail
[email protected]
MANUFACTURER
Manufacturer: Shenzhen NearbyExpress Technology Development Co., Ltd.
Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China

Made in China
TT-DL095_V1.2_EN

References

• TaoTronics Official Site - Technology Enhances Life

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>