anko 43131877 Vlogging Kit Instruction Manual

anko 43131877 Vlogging Kit

Package Include:

10 inch ring light stand with USB cable| Microphone| ****

Webcam

---|---|---
1.| Tripod Stand x1| 1.| Tripod Stand x1| with USB cable x1
2.| Universal Phone Clip x1| 2.| sponge ball x1
3.| Phone Clip stick x1| 3.| 1 meter USBC cable x1
4.| 360° Hot Hose Ball Head x1|  |

10 inch ring light stand Function

The LED ring light have 3 light modes (white, warm yellow, warm white), 10 adjustable brightness

How to install

1. Screw the ball head to the Tripod stand with 1/4 inch mounting screw, tightened screw cap after the connection;
2. Screw the ring light to the tripod stand through threaded joint with the screw cap.
3. Screw the phone clip stick to the light
4. Unscrew the nut behind the phone clip
5. Aimed the rotation ball axis into the hole.
6. Push the axis into the nut and secure the nut.
7. Put the phone in the phone clip in vertical or horizontal position phone clip.
8. Connect the USB cable to an USB adapter (Not included).

Specifications

Input: DC 5V 1A

Features

1. Connect the 3.5mm headphone port to this 3.5mm microphone input port.
2. Indicator light White light: normal work, with real-time monitoring function Green light: noise reduction function Turn the knob from left to right to adjust the monitor sound Blue light: Start/Turn off real-time monitoring function
3.  Normal monitor work/noise reduction monitor function/ear-back monitoring function Press the button to switch the modes in a loop

Microphone connection

Connect the USB-C cable (included) to the USB-C port at the bottom of microphone, and connect the other end type-A to the computer. The power indicator light will turn white if it is working properly.

Supports

Mac computer, Windows 7/8/10 or later

How to install

• Install the shock rack on the tripod.
• Install the microphone on the shock rack.
• Install the sponge ball on the microphone if needed.
• Adjust the button on the shock rack to adjust the angle of the microphone.

How to place the microphone
Place microphone directly in front of the user 15 cm (6″) distance. Moving a little closer will make the vocal sound more intimate and full, while moving back will give the vocal a little more ‘air’ or room sound, and will reduce the proximity effect (It will increased bass or low frequency response when the sound source is very close).

How to adjust input level

Adjust your input level manually via the computer’s system preferences by using the following instructions relevant to your device platform/operating system.
Note: please check if the power indicator light turn to white to make sure the microphone  works properly.

Adjusting the input level on a Mac OS computer:

1. Click on the Apple symbol at the top left of your screen, and select System Preferences.
2. Click on “Sound” to open the sound options.
3. Open the “Input tab”
4.  Select the “USB LCS Audio” from the list of devices, and adjust the input level using the slider.

Adjusting the input level on a Windows computer:

1. Choose “Open Sound setting”. (Or open the Start menu and click on “Control Panel.
2. Open the “Recording” tab and double click on “USB LCS Audio” from the list of devices.
3. Adjust the input level, using the slider and click OK.
4. Click “Playback”, then double click “Speaker” (USB LCS Audio), to enter the adjustment interface.
5. Click “Levels”, adjust the monitor volume and computer music volume.

Important

• Don’t disassemble the microphone by yourself.
• Regular maintenance is recommended to avoid electricity erratic and acoustic problems.

Specification

• Polar Pattern: Cardioid
• Sensitivity: – 33±2dB（1.5V, 680KΩ; 0dB = 1V / Pa, 1KHz）
• Frequency Rate: 80Hz-20000Hz
• SPL: 110dB
• S/N Ratio: >68dB
• Output Impedence: <2.2KΩ
• Sampling Rate/Bit depth: 96KHz/24bit

Polar Response

Webcam Parts:

1. HD 1080p lens
2. Microphone
3. Flexible clip/base
4. USB cable

How to install

1. Place your webcam Grasp as shown and open the flexible clip/base with our other hand. Mount the webcam, making sure the foot on the flexible clip/base is flush with the back of your monitor
2. Connect the webcam Plug it into one of the USB ports of your computer. If you are using a desktop PC, it will be better to plug it into the USB ports at the back of computer case instead of those in the front

Specifications:

• Video resolution: 1920 * 1080
• Pixel: 2 million pixels
• Resolution: 2MP
• Frame rate: 1080P 30fps Max
• Auto control: Saturation, Contrast, acutance, White balance, exposure
• Protocol: UVC/UVA
• Data Format: MJPG/YUY2
• Video Out: USB2.0/3.0
• Function: support 3D denoising, image enhancement, dynamic contrast enhancement processing functions;
• Video output: USB live streaming
• Working voltage: USB / 5V
• Wide angle: 90°
• Cable length: 1.4 meters
• With free drive: support
• Built-in mic: support
• Plug and play: support
• Autofocus: support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>