OMCAN MG-IT-0012-C Meat Grinders Instruction Manual
- June 5, 2024
- OMCAN
Table of Contents
OMCAN MG-IT-0012-C Meat Grinders Instruction Manual
service@omcan.com
www.omcan.com
General Information
Omcan Manufacturing and Distributing Company Inc., Food Machinery of America, Inc. dba Omcan and Omcan Inc. are not responsible for any harm or injury caused due to any person’s improper or negligent use of this equipment. The product shall only be operated by someone over the age of 18, of sound mind, and not under the influence of any drugs or alcohol, who has been trained in the correct operation of this machine, and is wearing authorized, proper safety clothing. Any modification to the machine voids any warranty, and may cause harm to individuals using the machine or in the vicinity of the machine while in operation.
CHECK PACKAGE UPON ARRIVAL
Upon receipt of an Omcan shipment please inspect for external damage. If no
damage is evident on the external packaging, open carton to ensure all ordered
items are within the box, and there is no concealed damage to the machine. If
the package has suffered rough handling, bumps or damage (visible or
concealed), please note it on the bill of lading before accepting the delivery
and contact Omcan within 24 hours, so we may initiate a claim with the
carrier. A detailed report on the extent of the damage caused to the machine
must be filled out within three days, from the delivery date shown in the
shipping documents. Omcan has no recourse for damaged products that were
shipped collect or third party.
Before operating any equipment, always read and familiarize yourself with all
operation and safety instructions.
Omcan would like to thank you for purchasing this machine. It’s of the utmost
importance to save these instructions for future reference. Also save the
original box and packaging for shipping the equipment if servicing or
returning of the machine is required.
Safety and Warranty
WARNINGS ON THE RESIDUAL RISKS
RESIDUAL RISK DUE TO THE FIXED PROTECTIONS REMOVAL OR INTERRUPTION ON BROKEN/ WORN PARTS.
The operator must not try to open or remove a fixed protection or tamper with a safety device.
During operation, maintenance and cleaning, keep hands or other body parts away from the machines dangerous areas, a residual risk remains due to:
- Knocks with the machines manufacturing parts.
- Grazing and/or abrasion with the machines rough parts.
- Cuts with the sharp parts.
PROTECTION DEVICES ON THE MACHINE
The machine protections and safety devices must not be removed, never operate
without attaching the hopper.
The machines transmission parts are completely isolated by means of fixed protections which does not allow access. The moving elements are not isolated from fixed protections, moving protections or other safety devices. The grinding group parts are placed away from access points so they are not reachable.
RESIDENTIAL USERS: Vendor assumes no liability for parts or labor coverage for component failure or other damages resulting from installation in non- commercial or residential applications. The right is reserved to deny shipment for residential usage; if this occurs, you will be notified as soon as possible.
1 YEAR PARTS AND LABOUR BENCH WARRANTY
Within the warranty period, contact Omcan Inc. at
1-800-465-0234 to schedule a drop off
to either an Omcan authorized service depot in the area, or to an Omcan
Service warehouse to repair the equipment.
Unauthorized maintenance will void the warranty. Warranty covers electrical
and part failures, not improper use.
Please see https://omcan.com/disclaimer for complete info.
WARNING:
The packaging components are classified as normal solid urban waste and can
therefore be disposed of without difficulty. In any case, for suitable
recycling, we suggest disposing of the products separately (differentiated
waste) according to the current norms.
DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT!
Technical Specifications
Installation and Operation
TRANSPORTATION, HANDLING AND STORAGE
All transportation and handling operations must be performed from trained
personnel and must have read and understood the safety precautions mentioned
in this manual.
- Perform the machine handling and transportation only when unplugged.
- Verify that the lifting means are able to support the loading weight and overall dimensions in safe conditions.
- Avoid dropping or shaking the unit during transportation.
PREPARATION PRELIMINARY OPERATIONS
STABILITY The machines stability is designed so that it can be used
without the risk of falling or unwanted movement.
ELECTRICAL SUPPLY The electrical supply connection must be in conformance with the country legislation in which it is being used.
- The electrical supply must match the required specifications indicated on the rating plate. If excessive voltages are applied, some components will be damaged beyond repair.
- The device must be grounded in conformance to the local standards.
- The electrical supply cable outside the machine cover must be adequately protected.
GRINDING GROUP ASSEMBLY / DISASSEMBLY
The assembly / disassembly operations of any machine part are performed with
the machine in the OFF position, and the plug disconnected from the socket.
To assemble the grinder, do the following steps in this order:
- Insert into the shaft (1) in order: the worm (2), the cutting knife oriented as shown in the figure (3), and the plate (4).
- Screw down and tighten the screw (5).
To disassemble, do the above in reverse order.
FUNCTIONING DESCRIPTION
STARTING THE MACHINE To start the machine, the switch has to be placed on
the “I” position.
STOPPING THE MACHINE To stop the machine, the switch has to be placed on
the “O” position.
FUNCTIONING SAFETY If the machine is under stress, operated for a long
period of time or overloaded, stop immediately for the thermal protection
functioning. In this case wait for the unit to cool completely before using
again.
OPERATION
The machine operator can begin operation of the machine when:
- The machine is installed properly.
- The machine is connected to the electrical supply.
- The hopper is inserted in the correct position.
- The grinding group assembly is installed correctly.
- The worm rotates in the correct direction.
- Tests the switch.
- Checks that all safety conditions are being met.
- Checks that the plug is in the correct socket.
- Place a collecting tray below the shaft to collect the final product.
- Start the machine by placing the switch to the “I” position.
- Manually introduce the chopped meat into the machine neck and use the supplied stomper to push the meat into the shaft.
- Once the operation is completed, or when the product no longer comes out of the plate, place the switch to the “O” position to stop the machine.
It is recommended to only operate the machine when there is product in the unit.
AFTER EACH USE Once the machine has been operated and is no longer needed for use, please do the following:
- Before turning off the unit, wait until the food product has finished going through the plate.
- Turn off the machine by placing the switch to the “O” position.
- Unplug the unit from the electrical socket.
- Perform the cleaning and maintenance steps detailed in the “Maintenance” section.
UNBLOCK IN CASE OF OBSTRUCTION During operation, or during the worm rotation, due to the food products being introduced with incompatible parts (ie: bones), the machine could become blocked and cause a malfunction. To be able to resume normal operation, the grinding group must be disassembled, and the blockage must be removed.
Maintenance
PROTECTIVE SAFETY DEVICES
For any procedures described in this section, it is necessary to remove some
of the fixed protections from their positions. The removal can only be
performed by an authorized Omcan technician. At the end of the maintenance
procedures, these protections must be replaced and fastened in their original
positions.
The machine must be switched off and unplugged prior to any maintenance and
cleaning.
EXTRAORDINARY MAINTENANCE
In the event of any extraordinary maintenance, it can only be completed by an
authorized Omcan service technician.
CLEANING
All cleaning procedures must be started only when the machine is no longer in
operation and is unplugged from the electrical socket.
The machine, the electrical equipment and electrical components must never be submerged, sprayed, or washed with water. Use a dry cloth to wipe these components.
Follow the steps as listed:
Troubleshooting
Parts Breakdown
Model MG-IT-0012-C 11051
Model MG-IT-0012-C 11051
Model MG-IT-0022-C 11053
Model MG-IT-0022-C 11053
Model MG-IT-0032-C 39714
Model MG-IT-0032-C 39714
Electrical Schematics
Model MG-IT-0012-C 11051
Model MG-IT-0022-C 11053
Model MG-IT-0032-C 39714
Warranty Registration
Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: https://omcan.com/warranty-registration/
For mailing in Canada Pour postale au Canada Por correo en Canadá
OMCAN
PRODUCT WARRANTY REGISTRATION 3115 Pepper Mill Court, Mississauga, Ontario
Canada, L5L 4X5
For mailing in the US Pour diffusion aux États-Unis
Por correo en los EE.UU.
OMCAN
PRODUCT WARRANTY REGISTRATION 4450 Witmer Industrial Estates, Unit 4, Niagara
Falls, New York USA, 14305
or email to: service@omcan.com
Since 1951 Omcan has grown to become a leading distributor of equipment and
supplies to the North American food service industry. Our success over these
many years can be attributed to our commitment to strengthen and develop new
and existing relationships with our valued customers and manufacturers. Today
with partners in North America, Europe, Asia and South America, we continually
work to improve and grow the company. We strive to offer customers exceptional
value through our qualified local sales and service representatives who
provide convenient access to over 5,000 globally sourced products.
http://www.omcan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>