SIIG 4K120Hz HDMI Extender with IR User Manual
- June 13, 2024
- SIIG
Table of Contents
SIIG 4K120Hz HDMI Extender with IR
Features
- Supports up to HDMI 4K@120 4:4:4 8b its HDR
- Supports HDCP 2.3, 2.2 & 1.4
- Extend 4K@120Hz video up to 132ft/40m through a Cat6/6a/7 UTP cable
- Supports digital stream conversion (DSC) funct i and compat ble with the DSC 1.2a
- Supports data transfer rate up to 8Gbps per channel (32Gbps all channels)
- TMDS clock can be up to 800MHz
- Supports 12bit per channel deep color
- Supports Build-in EDID & Bypass EDID
- HDMI Audio Format : PCM 2/5.1/7.1, DTS 5.1/7.1 Dolby 5.117.1 & Atmos (need to select TV EDID)
- Supports bi-directional IR passback (20-60KHz) Lightning Protection, Surge Protection, ESD Protection
Package Contents
- Transmitter & Receiver
- Power Adapter DC 12V /1 A x2
- IR Blaster Cable
- IR Receiver Cable
- User Manual
Layout
- EDID Switch
- STD : Build-in EDID 4K@120Hz, PCM 2ch
- TV : Bypass Display EDID to the video source
- RJ-45 : Connect to Receiver with Cat6 UTP cable
- Power LED: Turn blue when power on
- Power Jack : DC 12V/1 A
- IR In : Connect with IR receiver extension cable, please make sure the remote control used is within the effective range
- IR Out : Connect with IR blaster extension cable, please get closer to the source device while using
- HDMI Input : Connect to HDMI source
- Reset Button : Press to restart the device
Receiver (RX)
- RJ-45 : Connect to Transmitter with Cat6 UTP cable
- Power LED : Turn blue when power on
- Power Jack: DC 12V/1 A
- IR In : Connect with IR receiver extension cable, please make sure the remote control used is within the effective range
- IR Out : Connect with IR blaster extension cable, please get closer to the source device while using
- HDMI Output : Connect to HDMI display
- Reset Button : Press to restart the device
Note
- We recommend CAT6/6a/7 UTP cable with 100% copper wiring and IEEE-568B wiring standard.
- We recommend HDMI cable do not over 16fU5m.
EDID
- STD : Build-in EDID support resolution up to l 4K@120Hz, Aud o channel on y supports PCM 2ch.
- TV : Bypass Display EDID, Resoluton & Audio channel will be use the connected Display spec.
Support Resolution
- 480i, 480p, 576i, 576p, 720p
- 1080p@60Hz, 4K@60Hz, 4K@120Hz
IR Cable
IR blaster
- Power
- IR Signal
- Null
IR receiver
- Power
- IR Signal
- Grounding
Application
Q &A
Q: Why the Power LED is off?
- Please check if the power supply is connecting well and the output voltage value is correct as recommended 12V/1 A.
Q: Why no sound or sound issues?
- Please check if the HDMI cables are connecting well; if the audio format is supported by the displays, customers can change to the supported audio format or the player’s audio output is setting HDMI audio output or not.
Q: Why is the output image unstable?
-
Check whether the length of the UTP cable connected from TX to RX is with
-
The length of HDMI cable s recommended to be s 16ft/5m.
-
Press the “reset” button on TX and RX panels to restart and reconnect.
Q: Why I can’t use Dolby Atmos or Digital audio?
- Please confirm your display support Dolby Atmos or Digital audio.
- Check the EDID switch is selected to TV position
- Please check your video source is select to use Dolby Atmos or Digital audio.
Dear Valued Customer
WE REALLY APPRECIATE YOUR PURCHASE
-thank you-
Support
- For more info or tech support
- http://www.siig.com/support
- Jun. 2023 Copyright© 2023 by SIIG, Inc. All rights reserved.
Read User Manual Online (PDF format)
Loading......