QTL QOM-eLED+WD Pool and Spa LED Power Supply Installation Guide
- August 6, 2024
- QTL
Table of Contents
QTL QOM-eLED+WD Pool and Spa LED Power Supply
Specifications
- Product Name: QOM-eLED+WD
- Power Supply: 120V – 277V
- Mounting Options: Pole Mount, Surface Wall Mount
- Dimming Module: 0-10V DIMMING
Product Usage Instructions
Installation Instructions
- Housing Dimensions: 14.5 x 15.4 x 4.90 inches
Mounting Options:
- Pole Mount: Refer to the provided dimensions for installation.
- Surface Wall Mount: Use a 1/4 x 2 wood screw or LAG bolt for installation.
Driver with Dimming Module:
The QOM-eLED+WD is designed for exterior use and comes with a LED DRIVER (120V – 277V) and a Warm-Dim Module.
Wiring Instructions:
- Connect the wires as follows:
- Primary Side: GND, HOT, NENUEU
- Secondary Side: +24V, C, W
- For 0-10V DIMMING, wire according to the color codes provided (pink or grey).
CSA Requirements:
- Ensure compliance with CSA requirements for installation and usage.
FAQ
Frequently Asked Questions
- Q: Can the QOM-eLED+WD be used indoors?
- A: The QOM-eLED+WD is specifically designed for exterior use.
- Q: What are the mounting options for this product?
- A: The mounting options include Pole Mount and Surface Wall Mount.
- Q: How should I wire the dimming module?
- A: Follow the provided wiring instructions and use the color codes (pink or grey) as specified.
Housing
Mounting Options
NOTE
- To order additional lengths of wire for connection in the secondary. Please call factory for availability.
- QOM must be installed as shown.
Driver with Dimming Module
QOM-eLED+WD
- for exterior
CSA Requirements
- Suitable for indoor and outdoor use
- This power supply must be installed according to the National Electric Code and local codes and ordinances and in accordance with applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Wear rubber shoes and work on a sturdy wooden or fiberglass ladder.
- This power supply is to be installed in a location where it is not likely to be contacted by non-electricians.
- To avoid a hazard to children, account for all parts and destroy all packaging materials.
CONTACT
MILFORD, CT U.S.A.
- 203-367-8777
- www.QTL.lighting
- 155 Hill St. Milford, CT 06460
- sales@QTL.lighting | QTL.lighting
© 2024 QTL. All rights reserved
Specification subject to change
Read User Manual Online (PDF format)
Loading......