TWOPAGES LIZ POLYESTER Cord Lift Roman Shade Installation Guide
- July 20, 2024
- TWOPAGES
Table of Contents
TWOPAGES LIZ POLYESTER Cord Lift Roman Shade
PARTS INCLUDE
- A. Corded Roman Shade x 1
- B. Mounting Bracket x 2-3
- C. Screw Sets x 4
Bracket Configuration:
- Width 45″ and above – 3 brackets
- Width 58″ and above – 4 brackets
- Width 67″ and above – 5 brackets
NECESSARY TOOLS
- Metal Tape Measure
- Pencil
- Drill
- Screwdriver
MOUNTING INSTRUCTIONS
MOUNTING YOUR SHADE: OUTSIDE MOUNT (A)
- A1 Marking Holes
- Determine the desired height and position of screws. mark them with a pencil. and drill the holes in the wall or window frame. Make sure the holes are level with each other.
- A2 Installing Brackets
- Attach the brackets 4D with the screw sets (9 provided. then tighten the screws in place to install the brackets on the wall.
- The extra brackets will be equipped and need to be installed for Roman shades wider than 45 inches.
- A3 Inserting
- Insert the top front of the head rail into the front slot of the brackets. Then. secure the railing by pushing it into position.
- A4 Installing Cleat
- Place the pull cord into the cord cleats. then locate the desired mounting place for the cleats and drill holes. Tighten the screw to secure the cleats.
MOUNTING YOUR SHADE: INSIDE MOUNT (B)
- B1 Marking Holes
- Determine the desired position of screw holes. mark them with a pencil. and pre-drill the holes in the window frame. Make sure the holes are level with each other.
- B2 Installing Brackets
- Attach the brackets B with the silver screw sets C provided. then tighten the screws in place to install the brackets on the window frame. The extra brackets will be equipped and need to be installed for Roman shades wider than 45 inches.
- B3 Inserting
- Insert the top front of the head rail into the front slot of the brackets. Then. secure the railing by pushing it into position.
- B4 Installing Cleats
- Place the pull cord into the cord cleats. then locate the desired mounting place for the cleats and drill holes. Tighten the screw to secure the cleats.
SHADE REMOVAL
- Remove the Roman shade panel. first, disassemble the skew of the cord cleat. then insert a flat-head screwdriver into the back slot between the shade header and brackets to release the insertion.
- Then carefully pull the shade panel downwards to detach it. Repeat this process for each bracket if there are multiple ones. ensuring you hold the shade securely to prevent it from falling.
MUST READ NOTE:
- After unboxing. follow the installation instructions for hanging the Roman shade.
- Please do not tamper with or untie the lifting mechanism connected by the white cord at the back of the shade. as this may cause damage and render the shade inoperable.
CONTACT
- https://twopagescurtains.com.
- HAVE AN INSTALLATION CHALLENGE?
- GET IN TOUCH WITH OUR EXPERTS!
- Contact Us: Support@twopagescurtains.com.
- + l 866-220-2391 (9:00-18:00 EST)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>