nVent 60630-498_BET Rack Chiller Instruction Manual
- June 1, 2024
- nVent
Table of Contents
nVent 60630-498_BET Rack Chiller
Product Information
Specifications:
- Product Name: VARISTAR LHX+ 45 Rack Chiller In-Row 45 Flexible Water Hoses QD-BSP
- Tightening Torque: +/- 15%
Product Usage Instructions
Mounting Instructions:
Ensure that the tightening couples are within the specified tolerance of
+/- 15% unless stated otherwise.
Step-by-Step Installation:
- Locate the middle fixing bracket for support.
- Use a torque wrench to tighten the screws to 5 Nm.
- Repeat the process for all fixing points as indicated in the manual.
Maintenance :
Regularly check the tightening torque to ensure stability and proper
functioning of the product.
FAQ (Frequently Asked Questions)
-
Q: What is the recommended torque for tightening the screws?
A: The recommended torque for tightening the screws is 5 Nm with a tolerance of +/- 15%. -
Q: How often should I check the tightening torque?
A: It is recommended to check the tightening torque periodically, especially after initial installation, and then as part of regular maintenance schedules.
User Manual
- VARISTAR LHX+ 45
- Rack Chiller In-Row 45
- FLEXIBLE WATER
- HOSES QD-BSP
-
Case A:
- Water connection from the bottom (page 3-10)
-
Case B:
- Water connection from the top (page 11-13)
-
Mounting:
Tightening couples are given with a tolerance of +/- 15% unless otherwise stated .
-
Middle fixing bracket
-
Bottom fixing bracket
-
Middle fixing bracket
-
nVent.com
60630-498_BET Rev.A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>