TELEBrands NE9T6N Bluetooth Electronic Kitchen Scale User Manual
- June 6, 2024
- TELEBrands
Table of Contents
User Manual
Product Information
Product model name
NE9T6N
Product Descriptions
The kitchen scale is a Bluetooth electronic scale used for food weighing. The
weighing range is 3g-5000g, and the accuracy is 1g.
-
The input power source is 2 X AAA 1.5V Alkaline Battery.
-
It has 2 touch buttons:
One “Power/Zero” button can turn on, turn off, clear and tare, etc.;
One “Uint” button can be short-pressed to switch units lb: oz, fl’oz, g, ml, and long-press can restore factory settings and enter the Bluetooth network configuration state. -
It has 4 load cells located above the product footpad.
-
It contains 1 Bluetooth module, which can communicate with wireless BLE, and can upload data, such as weighing the weight of food.
-
It will display “Err” if it exceeds the weighing range of 5000g.
-
If it is lower than 2.4V, it will alarm for low battery and display “Lo”.
-
It has a low-power sleep function, can be set by software, can also belong press and hold “Power/Zero” button 5 seconds setting.
Safety and Compliance Information
Using Your Device Around Other Electronic Devices
The Device, uses, and can radiate radio frequency (RF) energy and, if not used
in accordance with its instructions, may cause interference to radio
communications and electronic equipment. External RF signals may affect
improperly installed or inadequately shielded electronic operating systems,
entertainment systems, and personal medical devices.
While most modern electronic equipment is shielded from external RF signals if
in doubt, check with the manufacturer. For personal medical devices (such as
pacemakers and hearing aids), consult with your physician or the manufacturer
to determine if they are adequately shielded from external RF signals.
There are some places where RF signals could constitute a hazard, such as
health care facilities, and construction sites. If you are not sure, look
around for signs indicating that two-way radios or mobile phones should be
turned off.
Other Safety Considerations
- Do not touch your Device or any wires connected to your Device during a lightning storm.
- Small parts contained in your device and its accessories may present a choking hazard to small children.
FCC Compliance Information
Radio Frequency Information
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications that are not expressly approved by the party
responsible for compliance could make the device no longer comply with the FCC
Rules.
Information on your device is on file with the FCC and can be found by
inputting your device’s FCC ID, which can be found on the back of the Device,
in the FCC ID Search form available at
transition.fcc.gov/oet/ea/fccid.
Information Regarding Exposure to Radio Frequency Energy
The output power of the radio technology used in the Device is below the radio
frequency exposure limits set by the FCC. Nevertheless, it is advised to use
the Device in such a manner that minimizes the potential for human contact
during normal operations.
This device should be installed and operated with at least 20 cm between the
radiator and your body.
IC Compliance Information
Radio Frequency Information
This device complies with Industry Canada’s license-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Information Regarding Exposure to Radio Frequency Energy
This equipment complies with IC RSS-102 RF exposure limits set forth for an
uncontrolled environment.
Recycling Product Properly
In some areas, the disposal of certain electronic devices is regulated. Make
sure you dispose of or recycle the Products in accordance with your local laws
and regulations.
Product Specifications
Model Number: NE9T6N
INPUT: 2*AAA 1.5 V Alkaline Batteries
Operating temperature: 0°C to 35°C
Connectivity: BLE4.2
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>