SWIT PC-P461S-A-B Portable 4 Inch Battery Fast Charger User Manual

PC-P461 S/A/B
Portable 4-ch Battery Fast Charger
Ver:B
USER MANUAL
SWIT Electronics Co.,Ltd.

Thank you for choosing SWIT products. Please read the instructions before using them, and keep them for future reference.

Warning

Keep in mind the following precautions to avoid fire or electric shock!

• Never expose the battery charger to rain or moisture.
• Never attempt to open the battery charger, please contact the local agent if have problems.
• Never use metal or other conductors to touch the inside of the battery charger.
• Never short-circuit the battery charger terminal.
• Please make sure the voltage range is fit for the battery charger.

Caution

• Only limited to charging the specified battery(ies), it may cause danger if charge other battery(ies) due to incompatibility problem.
• Keep the terminals clean and ensure a reliable connection.
• It is a normal phenomenon that the battery charger may become warm in use.
• Do not cover the cooling vent.
• Please do not put the battery charger in an unstable place, it may fall and cause serious damage.
• Do not use another brand of AC power cable to avoid damage.

Features

• Intelligent identification of fast-charging battery, support 4-ch 6A fast charge simultaneously.
• PC-P461 S automatically identifies SWIT 14.4V and 28.8V batteries to switch charging voltages.
• Real-time monitoring of the current state, intelligent regulation of charging current.
• 3.5-inch full-view highlight screen for real-time monitoring of battery and charging information in various light environments.
• 4-ch super big independent LED, Clear indication of the battery charging status.
• Full range of temperature, voltage, and current protection functions.

Appearance

1. LCD Screen
2. Power indicator
3. Power switch
4. Power socket
5. Charging status indicator

Charging and Display Function

• Charging status indicator: 0%-80% Red light always on 81%-99% Green light flash 100% Green light always on Error: Red light flash
• LCD Screen:

1. Standby

2. Charging
   1. After mounting the battery, the charger prepares to charge.
   2. Show the capacity and cycle times for 5s, then enter in the charging interface13).
   3. Show the percentage of battery capacity, battery voltage, and charging current.
   4. Charging complete.
   5. Battery abnormal situation handling interface, waiting for about 30s to exit this interface.

3. Relationship between charging current and battery temperature of fast charging battery:**
   Battery temperature| | Charging** current
   ---|---|---
   <45°C| | 6A
   ..45°C| 3A,| Battery regain 6A fast charge after battery temperature is under 40°C

1. When the battery gets over-heat protection, the charger can recognize the temperature of the battery, and the battery will be recharged after the temperature is under 45°C.

4. Error
   

Code of Error:

E01| Battery initialization failed| Please check the battery status and try to replug.
---|---|---
E02| Communication failed| Please replug the battery.
E03| Charger over-heat protection| Please check if the fan is working normally, If so, move the charger to a cold place.
E04| Charger fault| Please replug the battery or wait until the battery returns to normal temperature and replug.
E05| Self-check fault| Please restart the charger.

Specifications

33.6V, 3Ax4ch
Operating temperature| 0°C-40°C
Operating humidity| 10%RH-90%RH
Dimension| 330x153x162mm| 330×135.6x162mm| 330x140x162mm
Net weight| About 2.43kg

Tel:+86-25-85805753
Fax:+86-25-85805296
http://www.swit.cc
E-mail: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>