LaTRaX 75054-5 1-18 Scale 4WD Rally Car User Guide

: June 9, 2024
: LatRax

LaTRaX 75054-5 1-18 Scale 4WD Rally Car

LaTRaX 75054-5 1-18 Scale 4WD Rally Car

LaTrax Service and Support

Get parts and accessories FAST from Traxxas.com.
Traxxas and LaTrax vehicles are built to last…for years of hard-driving fun.
With proper maintenance, most Traxxas and LaTrax owners keep their vehicles for years, and Traxxas is the industry leader in customer support and service and parts availability.

Traxxas Experience Technicians are ready to help you with product setup, upgrades, tuning, parts replacement, or any other questions you may have about your Traxxas or LaTrax RC model.

Call us toll free at: 1-888-TRAXXAS (1-888-872-9927)*
Monday through Friday from 8:30am to 9:00pm central time
We offer 2-day standard shipping to most of the U.S.
Order until 7:00pm, and it ships the same day.

You can save time, along with shipping and handling costs, by purchasing replacement parts and accessories from your local dealer. Use our online dealer locator to find one near you!
*Toll-free support is available to U.S. residents only; ouside the U.S., please call +1-972-549-3000.

SAFETY PRECAUTIONS

Read and follow all warnings, precautions, and instructions in this guide and any other documentation provided for your model to ensure safe operation. Failure to operate your model in a safe and responsible manner may result in property damage and serious injury.

You alone are responsible for ensuring that all instructions and precautions are adhered to.

Important Points to Remember

Your model is not intended for use on public roads or congested areas where its operation can conflict with or disrupt pedestrian or vehicular traffic.
Never, under any circumstances, operate the model in crowds of people. Your model is fast and could cause injury if allowed to collide with anyone.
Because your model is controlled by radio, it is subject to radio interference from many sources that are beyond your control. Since radio interference can cause momentary losses of radio control, always allow a safety margin in all directions around the model in order to prevent collisions.
Don’t operate your model at night, or anytime your line of sight to the model may be obstructed or impaired in any way.
Most importantly, use good common sense at all times.

Speed Control and Motor

Your model’s electronic speed control (ESC) is an extremely powerful electronic device capable of delivering high current. Please closely follow these precautions to prevent damage to the speed control or other components.

Disconnect the Battery: Always disconnect the battery from the model when not in use.
Insulate the Wires: Always insulate damaged or exposed wiring with heat shrink tubing to prevent short circuits.
Transmitter on First: Switch on your transmitter first before switching on the model to prevent runaways and erratic performance.
Don’t Get Burned: The ESC and motor can become extremely hot during use, so be careful not to touch them until they cool. Supply adequate airflow for cooling.
Use the Factory-Installed Connectors: Do not change the battery connector. Improper wiring can cause fire or damage to the ESC. Please note that modified speed controls can be subject to a rewiring fee when returned for service.
No Reverse Voltage: The ESC is not protected against reverse polarity voltage.
No Schottky Diodes: External Schottky diodes are not compatible with reversing speed controls. Using a Schottky diode with your speed control will damage the ESC and void the 30-day warranty.
Always adhere to the minimum and maximum limitations of the speed control as stated in the specifications table in the Owner’s Manual (complete manual available for download online).

Batteries and Battery Charging

WARNING: FIRE HAZARD!

DO NOT ATTEMPT TO CHARGE LIPO BATTERIES WITH THE TRAXXAS NiMH CHARGER INCLUDED IN THIS PACKAGE.

Your model uses rechargeable batteries that must be handled with care for safety and long battery life. Make sure to read and follow all instructions and precautions for charging and maintaining the batteries. It is your responsibility to charge and care for the battery packs properly. In addition to your battery and charger instructions, here are some more tips to keep in mind.

Use the supplied charger to charge the included battery.
Never leave batteries to charge unattended.
Remove the battery from the model while charging.
Never charge batteries on wood, cloth, carpet or on any other flammable material.
Do not operate the charger in a cluttered space, or place objects on top of the charger or battery.
Always unplug the battery from the electronic speed control when the model is not in use and when it is being stored or transported.
Allow the battery pack to cool off between runs (before charging).
If a battery gets hot to the touch during the charging process (temperature greater than 140°F / 60°C), disconnect the battery from the charger and discontinue charging immediately.
Children should always have responsible adult supervision when charging and handling batteries.
Always store battery packs safely out of the reach of children and pets.
Do not use battery packs that have been damaged in any way. Do not use battery packs that have damaged wiring, exposed wiring, or a damaged connector as this may create the risk of fire.
Do not short-circuit the battery pack. This may cause burns and severe damage to the battery pack and create the risk of fire.
Do not burn or puncture the batteries. Toxic materials could be released. If eye or skin contact occurs, flush with water.
Do not expose the charger to water or moisture.
Do not disassemble the charger.
Store the battery pack in a dry location, away from heat sources and direct sunlight.
Nickel-Metal Hydride (NiMH) batteries must be recycled or disposed of properly.

Recycling Your NiMH Battery
It is strongly recommended that you recycle the vehicle battery when it has reached the end of its useful life. Do not throw the battery in the trash. To find a recycling center near you, ask your local hobby dealer or visit www.call2recycle.org.

MODEL OVERVIEW

SUPPLIED EQUIPMENT

5-cell 2-amp NiMH battery charger*
5-cell 2/3A NiMH battery*
4 AA alkaline batteries

Battery and charger style are subject to change and may vary from images

QUICK START GUIDE

The following guide is an overview of the procedures for preparing your model to drive. The complete manual for your model can be viewed and downloaded by following the link on the cover of this manual or by scanning the QR code. Please read this entire manual for complete instructions on the proper use and maintenance of your model.

READ THE SAFETY PRECAUTIONS

For your own safety, understand where carelessness and misuse could lead to personal injury and product damage.

WARNING: FIRE HAZARD!

DO NOT ATTEMPT TO CHARGE LIPO BATTERIES WITH THE TRAXXAS NiMH CHARGER INCLUDED IN THIS PACKAGE.

The included NiMH charger can only be used with Traxxas NiMH batteries equipped with the Traxxas High-Current Connector as shown. Please examine your connector to make sure that it is the proper connector. All batteries equipped with legacy Traxxas High-Current Connectors are not compatible with the included NiMH charger. DO NOT try to force legacy Traxxas High-Current Connectors, or any other type of connector, into the charger connector. DO NOT attempt to charge any batteries with the included NiMH charger if you are unsure of the battery type, the connector type, or if the original connector on the battery has been changed. If you do not understand this warning, please contact Traxxas Customer Support at 1-888-TRAXXAS (1-888-872-9927)* or your local hobby dealer for more information.
READ THE SAFETY PRECAUTIONS

*Toll-free support is available to U.S. residents only; ouside the U.S., please call +1-972-549-3000.

PREPARE YOUR MODEL

Charge the battery pack
Plug the charger into a wall outlet. The LED on the charger will glow green. Plug the battery into the charger. The LED will glow red, indicating the battery is charging. Charge time is approximately 3½ hours. The LED will turn green when the battery is fully charged.
PREPARE YOUR MODEL

Install the transmitter batteries
The transmitter requires 4 AA alkaline or rechargeable batteries.
PREPARE YOUR MODEL

INSTALL THE BATTERY PACK IN THE MODEL
Your model includes a 6.0V 5-cell NiMH battery pack.
Install the battery pack into the battery compartment with the battery wires facing the front of the model. Secure the battery with the battery hold-down, making sure not to pinch the battery wires.
Compatible batteries: 5- to 6-cell, 6.0-7.2V, 2/3A NiMH
PREPARE YOUR MODEL

TURNING ON YOUR MODEL

Turn on the transmitter.
Always turn the transmitter on first, before turning on the model. The transmitter’s LED will glow.
Plug the battery into the speed control.
Make certain the plugs are fully engaged.
Turn on the model.
Press and release the EZ-Set button on the speed control. The LED will glow red.
Note: If the LED is not red, see the Owner’s Manual at LaTrax.com for more information, or contact LaTrax Customer Service at 1-888-TRAXXAS (1-888-872-9927)*.

*Toll-free support is available to U.S. residents only; ouside the U.S., please call +1-972-549-3000.

BEFORE OPERATING YOUR MODEL

Check servo operation
Confirm the model’s wheels turn right and left when the transmitter steering wheel is turned right and left. The front wheels should be pointing straight ahead. If they are turned slightly, slowly adjust the steering trim knob on the transmitter until they are pointing straight ahead.

Range test the radio system
With a friend’s help, check servo operation at the farthest distance you plan to drive the model and confirm that there is no radio interference.
BEFORE OPERATING YOUR MODEL
Note: After stopping the model, return the transmitter’s trigger to neutral and push forward to activate reverse throttle.

OPERATING YOUR MODEL

Avoid running your model in tall grass, deep sand, or other conditions that severely limit the driving performance of the model. This will strain the power system and could cause early motor failure. If the model becomes stuck, do not apply throttle.
Free the model before continuing.

The transmitter has a directional antenna.
For maximum range, hold the transmitter upright and pointed in the direction of the model. Pointing the transmitter away from the model will reduce radio range.
OPERATING YOUR MODEL

AFTER YOU RUN YOUR MODEL

Turn the model off.
Press and release the EZ-Set button on the speed control. The speed control’s LED will go out.
Unplug the battery and remove it from the model.
Do not store the model with the battery installed.
Turn the transmitter off.
Always turn the transmitter off last, after the model has been turned off.

ELECTRONIC SPEED CONTROL ADJUSTMENTS

Selecting a Throttle Mode: SPORT, RACE, or TRAINING

Connect a fully charged battery to the model and turn on your transmitter.
With the model off, press and hold the EZ-Set button until the LED turns solid green, then solid red, and then begins blinking red. It will blink once, then twice, then three times, then repeat.
One blink = Sport Mode is the default setting. It allows full forward and reverse throttle.
Two blinks = Race Mode allows forward with brakes only (no reverse).
Three blinks = Training Mode limits maximum speed to 50% throttle for young or inexperienced drivers.
Release the EZ-Set button after the number of blinks for the mode you wish to select.
Note: If you missed the mode you wanted, keep the EZ-Set button pressed down and the blink cycle will repeat.
The LED will blink and then turn solid red. The model is now ready to drive.

CALIBRATING THE SPEED CONTROL

The speed control is calibrated at the factory. Follow these steps if you need to re-calibrate it.
CALIBRATING THE SPEED CONTROL

Connect a fully charged battery to the model.
Turn on the transmitter (with the throttle at neutral).
Press and hold the EZ-Set button (A). The LED will first turn green and then red. Release the EZ-Set button.
When the LED blinks RED ONCE, pull the throttle trigger to the full throttle position and hold it there (B).
When the LED blinks RED TWICE, push the throttle trigger to the full reverse position and hold it there (C).
When the LED blinks GREEN ONCE, programming is complete. The LED will then shine red.

RUNNING IN WET CONDITIONS

Your model is designed with features to protect the electronics in the model (receiver, servo, electronic speed control). Although highly water resistant, the model should not be treated as if it is submersible or totally, 100% waterproof. Water resistance applies only to the installed electronic components; the transmitter is not water-resistant. Running in wet conditions requires additional care and maintenance to prevent corrosion and maintain proper function. Download the complete owner’s manual for full precautions and maintenance requirements. Read and understand all precautions before operating your model in wet conditions. The complete owner’s manual for your model can be viewed and downloaded by following the link on the cover of this manual or by scanning the QR code. Please read this entire manual for complete instructions on maintaining your model.

MOTORS AND GEARING

The gear combination that comes stock on each model provides good overall acceleration and top speed. If you want 25+mph top speeds, install the optional high-speed gearing (parts #7590, 7591,and 7592, sold separately). The optional high-speed gearing is only intended for high-speed running on hard surfaces, and is not recommended for off-road or repetitive starting and stopping or the motor will be damaged. Every 10-15 runs, remove and clean the motor by wiping away accumulated dirt and debris from around the motor shaft bushing on the pinion gear side of the motor. After cleaning, lubricate the bushings at each end of the motor with a drop of light-weight electric motor oil.

1/18 LaTrax Rally Parts List

Parts shown in bold are optional accessories. Part categories and individual part listings are arranged numerically.

BEARINGS & BUSHINGS
7541X Bearings: 4x8mm (2), 6x10mm (8), 8x12mm (5)

BODY & ACCESSORIES
7511 Body, LaTrax Rally (clear, requires painting)/decals
7512 Body, LaTrax Rally, yellow (painted)/ decals
7513 Body, LaTrax Rally, green (painted)/ decals
7514 Body, LaTrax Rally, blue (painted)/ decals
7515 Body, LaTrax Rally, red (painted)/ decals
7516 Body mounts, front & rear/ body mount posts, front & rear
7517 Body, LaTrax Rally, orange (painted)/ decals

BUMPERS & SKIDPLATES
7534 Suspension pin retainer, front & rear
7535 Body bumper, foam

CHASSIS & ATTACHMENTS
7516 Body mounts, front & rear/ body mount posts, front & rear
7522 Chassis
7523 Upper chassis/ battery hold-down
7524 Box, receiver/ ESC mount/ rubber plug/ adhesive foam tape (2)
7525 Carbon fiber conversion kit (includes chassis, upper chassis, battery hold-down, adhesive foam tape, hardware)
7529 Servo mount/ servo horn
7530 Bulkhead, front & rear/ differential housing, front & rear
7535 Body bumper, foam
7537 Shock towers, front & rear
7537X Shock towers, front & rear, 6061-T6 aluminum (blueanodized)

DIFFERENTIAL COMPONENTS
7578 Pinion gear, differential (2)
7579X Gear set, differential, metal (output gears (2)/ spider gears (4)/ ring gear, 35T (1)/ 2×14.8mm pin (1))
7581 Spool (solid axle), 6061-T6 aluminum (blue-anodized)

DRIVELINE COMPONENTS
7532 Caster blocks (c-hubs) (2)/ steering block (2)
7536 Camber links (4)/ toe links (2)
7550 Driveshaft assembly, front & rear (4)
7550R Driveshaft assembly, front/rear, 6061-T6
aluminum (blue-anodized) (2)
7552X Carriers, stub axle (2)
7555 Driveshaft, center, aluminum/ pin
7555X Driveshaft, center (one-way)
7569 Wheel hubs, hex (disc brake rotors) (4)

FRONT SUSPENSION
7530 Bulkhead, front & rear/ differential housing, front & rear
7531 Suspension arms, front & rear (4)
7532 Caster blocks (c-hubs) (2)/ steering block (2)
7533 Suspension pin set, complete (front & rear)/ hardware
7534 Suspension pin retainer, front & rear
7536 Camber links (4)/ toe links (2)
7537 Shock towers, front & rear
7537X Shock towers, front & rear, 6061-T6 aluminum (blueanodized)
7539 Camber rods, 2-degree/3-degree (6 each)
7540X Pivot balls: black (6), silver (2), black (long) (2)

HARDWARE
7533 Suspension pin set, complete (front & rear)/ hardware
7540X Pivot balls: black (6), silver (2), black (long) (2)
7541X Bearings: 4x8mm (2), 6x10mm (8), 8x12mm (5)
7542 Body clips (12)
7543 Screw set, complete

MOTORS & ELECTRONICS
2063A Servo case/gaskets (for 2065A waterproof, sub-micro servo)
2063R Servo case/gaskets (for 2065R metal gear, waterproof, sub-micro servo)
2063X Servo case/gaskets (for 2065X metal gear, waterproof, sub-micro servo)
2064 Gear set (for 2065 waterproof sub-micro servo)
2064A Gear set (for 2065A waterproof sub-micro servo)
2064R Gear set, metal (for 2065R waterproof sub-micro servo)
2064X Gear set, metal (for 2065X waterproof sub-micro servo)
2065A Servo, sub-micro, waterproof
2065R Servo, sub-micro, waterproof, metal gear
3045R Electronic Speed Control, LaTrax, waterproof (assembled with bullet connectors)
3046 Receiver, LaTrax micro, 2.4GHz (3-channel)
7575R Motor, 370 (23-turn) (assembled with bullet connectors)

RADIO SYSTEM, BATTERIES & CHARGER
2063A Servo case/gaskets (for 2065A waterproof sub-micro servo)
2063R Servo case/gaskets (for 2065R metal gear, waterproof, sub-micro servo)
2063X Servo case/gaskets (for 2065X metal gear, waterproof, sub-micro servo)
2064 Gear set (for 2065 waterproof sub-micro servo)
2064A Gear set (for 2065A waterproof sub-micro servo)
2064R Gear set, metal (for 2065R waterproof sub-micro servo)
2064X Gear set, metal (for 2065X waterproof sub-micro servo)
2065A Servo, sub-micro, waterproof
2065R Servo, sub-micro, waterproof, metal gear
2914 Battery, Power Cell AA Alkaline (4)
2925X Battery, Series 1 Power Cell, 1200mAh (NiMH, 6-C flat, 7.2V, 2/3A)
2974 Charger, DC, 2 amp (5 – 6 cell, 6.0 – 7.2 volt, NiMH)
2976 AC to DC converter, 40W
3046 Receiver, LaTrax micro, 2.4GHz (3-channel)
3047 Transmitter, LaTrax, 2.4GHz, 2-channel (transmitter only)
7521R Charger, AC, 350 mAh (5 cell, NiMH)
7524 Box, receiver/ ESC mount/ rubber plug/ adhesive foam tape (2)

READY-TO-RACE MODEL
75054-5 LaTrax Rally: 1/18 Scale 4WD Electric Rally Racer

REAR SUSPENSION
7530 Bulkhead, front & rear/ differential housing, front & rear
7531 Suspension arms, front & rear (4)
7533 Suspension pin set, complete (front & rear)/ hardware
7534 Suspension pin retainer, front & rear
7536 Camber links (4)/ toe links (2)
7537 Shock towers, front & rear
7537X Shock towers, front & rear, 6061-T6 aluminum (blueanodized)
7539 Camber rods, 2-degree/3-degree (6 each)
7540X Pivot balls: black (6), silver (2), black (long) (2)
7552X Carriers, stub axle (2)

SHOCKS (GTR)
7540X Pivot balls: black (6), silver (2), black (long) (2)
7560 Shocks, oil-less (assembled with springs) (4)
7560X Shocks, aluminum (blue-anodized) (assembled with springs) (4)
7561 Shocks, oil-filled (assembled with springs) (4)

SPUR GEARS & PINION GEARS
7591 Spur gear, 54-tooth
7592 Gear, 14-T pinion/ set screw
7640 Spur gear, 60-tooth
7641 Spur gear, 61-tooth
7644 Gear, 9-T pinion/ set screw
7645 Gear, 10-T pinion/ set screw

STEERING COMPONENTS
7538 Steering bellcranks, servo saver/ spring/ spring retainer/ posts/ draglink

TIRES & WHEELS
7569 Wheel hubs, hex (disc brake rotors) (4)
7570 Tires, slick (2)
7571 Wheels, 12-spoke (white) (2)
7572 Tires & wheels, assembled, glued (12-spoke white wheels, slick tires) (2)
7573 Tires & wheels, assembled, glued (12-spoke chrome wheels, slick tires) (2)
7573A Tires & wheels, assembled, glued (12-spoke black chrome wheels, slick tires) (2)
7573R Tires & wheels, assembled, glued (12-spoke blue chrome wheels, slick tires) (2)
7573X Tires & wheels, assembled, glued (12-spoke red chrome wheels, slick tires) (2)

TRANSMISSION COMPONENTS
7590X Gearbox housing/ motor plate
7591 Spur gear, 54-tooth
7592 Gear, 14-T pinion/ set screw
1/18 LaTrax Rally Parts List

WARRANTY COVERAGE

Electronic Components
LaTrax electronic components are warranted to be free from defects in materials and workmanship for a period of thirty (30) days from the date of purchase. Electronic components consist of the radio system (transmitter, receiver, servos, switches, chargers, adapters, and receiver battery holders) and any other LaTrax electronic component. See the additional limitations that apply.

Chassis and Driveline
The chassis and driveline consist of all remaining parts of the model that are not considered electronic. This includes electric motors.

Your new model is considered to be a hobby-class model. We have made every effort in component design, material selection, and assembly to make our products as durable as possible. Because our products are high-performance hobby-class models that operate at a much higher level of performance than a “toy”, require periodic maintenance, and are intended to be used in high- performance applications over an extremely wide range of running conditions and situations, no warranties are expressed or implied that cover damage caused by normal use or wear, or cover or imply how long any chassis or motor part will last before requiring replacement due to wear. Parts will wear from use and occasionally require replacement. The chassis and driveline are only covered against manufacturer’s defects in materials, workmanship, or assembly when they are new (before being used).

If any component is found to be defective, incorrectly made, or incorrectly assembled within the warranty coverage time period (where applicable), it will be repaired or replaced at the sole discretion of LaTrax. This will be done within a reasonable time period and free of charge.
If you believe a defect in materials, workmanship, or assembly was not apparent when the product was new and only became evident after the product was used, then please contact LaTrax Technical Support. We stand behind our products and reputation and pledge to do our best to make sure you are satisfied with your LaTrax product.

Limitations
Any and all warranty coverage does not cover replacement of parts and components damaged by abuse, neglect, improper or unreasonable use, crash damage, water or excessive moisture, chemical damage, improper or infrequent maintenance, accident, unauthorized alteration or modification, or items that are considered consumable. LaTrax will not pay for the cost of shipping or transportation of a defective component to us. This warranty is limited to the charger only and does not cover batteries, vehicles, and other accessories used in conjunction with the charger.

Your Hobby Dealer’s Role
All warranty claims are handled directly by LaTrax. Your dealer can assist you in contacting LaTrax and determining which components might be defective, but he is under no obligation to provide free replacement parts or service. LaTrax does not authorize dealers to make over-thecounter exchanges or refunds for LaTrax products that have been used. LaTrax will make the sole and final determination if a product or component can be covered under warranty.

Limitations of Liability
LaTrax makes no other warranties expressed or implied. LaTrax shall not be liable for any special, indirect, incidental, or consequential damages arising out of the assembly, installation, or use of their products or any accessory or chemical required to use their products. By the act of operating/using the product, the user accepts all resulting liability. In no case shall LaTrax’s liability exceed the actual purchase price paid for the product. LaTrax reserves the right to modify warranty provisions without notice. All warranty claims will be handled directly by LaTrax. This warranty gives the customer specific legal rights and possibly other rights that vary from state to state. All dollar amounts stated are in United States dollars. The term “lifetime” shall refer to the product’s production life at LaTrax. LaTrax is not obligated to provide upgraded products at a reduced rate when a previous product’s production cycle has ended. LaTrax encourages you to register your model online at LaTrax.com.

Non-Warranty Service
LaTrax offers a lifetime electronics warranty plan. It requires no payment up front. You only pay when you need the service.

LaTrax Lifetime Electronics Warranty
After the expiration of the warranty period, LaTrax will repair electronic components for a flat rate of $15.00 US, plus $5.00 US shipping and handling. The electronic products covered by this extended service plan include electronic speed controls, transmitters, receivers, servos, and battery chargers. Motors and mechanical speed controls are not covered.

Other mechanical repairs will be estimated separately. The covered repairs are limited to non-mechanical components that have NOT been subjected to abuse, misuse, or neglect. Products damaged by intentional abuse, misuse, or neglect may be subject to additional charges. Electronic speed controls that have been damaged by intentional abuse, misuse, water damage, or neglect may be subject to charges in addition to the warranty charge. The maximum additional charge will be automatically assessed when an electronic speed control has been rewired with non-factory connectors. Factory-installed connectors must be in place in order to connect the speed controls to factory test equipment. LaTrax liability, in no case, shall be greater than the actual purchase price of this product.

Procedure:
The electronic component being returned for repair should be removed from the vehicle and returned to LaTrax, along with:

Full payment in the form of a credit card number (MasterCard, Visa, or Discover) or money order (including shipping and handling)
Completed Lifetime Electronics Warranty form (available online)

Do not send the entire model, only the damaged component. The package shipped to LaTrax should be insured to cover the value of a new replacement. LaTrax cannot be responsible for items lost in transit to LaTrax. Follow the guidelines in the section Preparing Merchandise for Shipment online at LaTrax.com.

International Customers:
International orders must be paid by credit card (MasterCard, Visa, or Discover). Actual shipping charges will apply and are usually higher than $5.00 U.S. If you want to approve the shipping charges prior to your product being returned, then please supply a valid e-mail address and request approval of actual shipping charges on the Lifetime Electronics Warranty form.

How to Obtain Warranty and Repair Service
Call us first! Before you begin the process of obtaining warranty or repair service, please call us at 1-888-TRAXXAS and speak with one of our friendly and knowledgeable support technicians. Often a product might appear defective, or to malfunction, only because it is being used improperly or requires a simple adjustment. One phone call to our experienced support staff just might get you back up and running quickly and easily!
Note: Go online to LaTrax.com for detailed instructions on obtaining warranty or return repair service and preparing your model for shipment.

Additional Non-Warranty Charges
Additional charges can result from the following:
The product being returned for warranty service should be cleaned of excess dirt and grime accumulations that would hinder repair.
Excessively dirty models with large amounts of caked-on mud and oily grime may be subject to an additional cleaning charge of $25.00 US before repairs can proceed. Avoid this potential charge by cleaning the model before returning it for service.

“Basket cases” of disassembled models returned for warranty service may be subject to additional fees for reassembling components not related to the warranty repair, if necessary, to allow the repaired product to be adequately tested. Standard repair fees are currently $45.00/hour, billed in 15-minute increments with a one-hour minimum. To avoid this charge, do not disassemble the model before returning it for service.

Additional Limitations
Detailed Limitations for Electronic Components:

Allowing water, moisture, or other foreign material to enter the component or get onto the PC board
Exceeding the maximum input voltage of the electronic component.
Removing the stock battery connector(s)
Using the same type and (or) gender connectors on the motor and battery connections
Cross connection of the battery/motor
Reverse voltage application
Incorrect installation or wiring
Components worn from use
Splices to the input or switch harnesses
Disassembling the case
Excessive force when adjusting, pressing, or turning any of the controls
Tampering with the internal electronics
Incorrect wiring of an FET servo
Allowing exposed wiring to short circuit
Any damage caused by crash, flooding, or act of God

Rechargeable Batteries
LaTrax-supplied rechargeable batteries are warranted against manufacturer’s defects in materials, workmanship, and assembly when new.
There is no warranty expressed or implied that covers damage caused by normal use, or covers or implies how long the battery pack will run (run time) or last before requiring replacement due to normal use and normal cell degradation.
LaTrax shall not be liable for any damage caused by overcharging, battery failure, improper charging or discharging, use of non-approved chargers, use of non-approved batteries, and alterations or modifications of any kind to the charger, batteries, switches, or wiring.

FCC Compliance

This device contains a module that complies with the limits for a Class B digital device as described in part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
The limits for a Class B digital device are designed to provide reasonable protection against harmful interference in residential settings.
This product generates, uses, and can radiate radio frequency energy, and, if not operated in accordance with the instructions, may cause harmful interference to radio communications.
The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Canada, Industry Canada (IC)
This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. This device complies with Industry Canada license exempt RSS standard(s). Operation is subject to the following two conditions: This device may not cause interference, and this device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency (RF) Exposure Information
The radiated output power of the this device is below the Industry Canada (IC) radio frequency exposure limits. The LaTrax Model should be used in such a manner that the potential for human contact during normal operation is minimized. The antenna for this transmitter must not be co-located with any other transmitters except in accordance with FCC and Industry Canada multi transmitter procedures.
Co-location means having a separation distance of less than 20 cm between transmitting antennas.

TQ Radio System
Operation Frequency: 2406~2453 MHz
Maximum Radio Frequency Power: Maximum Peak Power -1 dBm
Traxxas High-Current Connector
Operation Frequency: 13.56 MHz
Maximum Radio Frequency Power: Maximum Peak Power -29.27 dBuA/m @ 10m

Battery Recycling (for U.S.A.)
The Rechargeable Battery Recycling Corporation (RBRCTM) seal on your model’s included battery indicates that LaTrax is voluntarily participating in an industry program to collect and recycle these batteries at the end of their useful lives, when taken out of service within the United States. The RBRC program provides a convenient alternative to placing used NiMH batteries into the trash or municipal waste system, which is illegal in some areas. Please call 1-800-8-BATTERY(1-800-8-228-8379) for information on battery recycling in your area. LaTrax’s involvement in this program is part of its commitment to protecting the environment and natural resources that we all share. RBRCTM is a trademark of the Rechargeable Battery Recycling Corporation.

CE Compliance for Users in the European Union WEEE Compliance:
Please help the environment by disposing of your product responsibly at the end of its life. The wheeled bin symbol indicates that this product should not be disposed of in your household waste containers. Instead, the product should be disposed of by using a designated collection point for the recycling of waste electrical and electronic equipment. The Waste of Electrical and Electronic

Equipment (WEEE) Directive (2002/96/EC) requires that the best available recycling techniques be employed to minimize the impact on the environment.

Recycling electronics helps by keeping harmful chemicals out of the environment, and also saves money by reusing precious metals.

Remove any batteries and dispose of them and the product at your local authority’s recycling facility. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service, or the location where you purchased this product.

Declaration of Conformity for RED Directive Traxxas LP hereby declares that this product is in compliance with Directive 2014/53/EU.

The full text of the EU Declaration of Conformity is available online at:
https://traxxas.com/compliance.
SIGNATURE ICON