anko 43105205 True Wireless Noise Cancelling Earbuds Instruction Manual
- June 5, 2024
- Anko
Table of Contents
Anko 43105205 True Wireless Noise Cancelling Earbuds
Operating instructions
Includes:
- TWS earphone
- Charging cable
- Extra S/L size ear tips
Function overview
How to use these earphones
Specifications
- Model No: 43105205
- Version: V5.0
- Function Operation
- Pause Press either MF button
- Play Press either MF button
- Voice assistant: Press and hold for 2 seconds to activate voice assistant (LEFT)
- Previous Press the left MF button twice quickly
- Next Press the right MF button twice quickly
Power ON
Removing Earphones from charging case will automatically turn them on
Power OFF
Placing Earphones into the charging case will automatically turn them off
Press and hold for 2 seconds to switch modes between Normal, Transparent, and
ANC (RIGHT)
Pairing the Earphones with Bluetooth® devices
-
Go to ” Bluetooth Settings on your Bluetooth device (phone, tablet, etc.) Turn the Bluetooth ON, on your device Open the charging case and remove the Earphones, they will automatically turn on (or can be turned on manually). The LED indicators on the left and right Earphones will flash blue and red as they automatically sync to each other. Once synced the Earphones will enter pairing mode, which is identifiable by one Earphone slowly flashing Blue while the other continues to flash Blue and Red.
-
on your Bluetooth Device, select the pairing name of your Earphones on the list of available devices. The pairing name is: anko 43105205. The Earphone LED indicator will slowly flash blue once connected (Troubleshooting tip: if the Earphones do not connect to your device, turn the Earphones OFF, turn your device’s Bluetooth OFF and then back ON, then repeat the pairing process).
Your Earphones are designed to automatically sync to each other when turned ON, however, if they ever fail to sync , please follow the below instructions to re-sync the left and right earphone -
then the earphone turn off, long press the L/R button for 10s , then comes a voice prompt and LED indicators flash red and blue , the earphone re-sync to each other successfully now.
Put the earphones into the charging case, then you can repeat the above paring process.
Phone calls
-
When there is an incoming call, the unit will pause the playback and ring to alert you of the call. To answer the call, press either of the earphone MF buttons. To end a call, press either of the earphone MF buttons again. To decline an incoming call, press and hold either MF button for 2 seconds.
Playing music
Press either the left or right earphone MF button once to pause , press either earphone MF button once again to resume playback. Press the left MF button twice to play previous track. Press the right MF button twice to play next track.
Battery Charging -
Using a USB-C to USB cable (included), connect to the USB port of a power on computer or USB power adaptor (not included) to charge the case. When the case is charging the Power & Battery Indicator LEDs will flash white. When fully charged all LEDs will turn solid white.
-
When fully charged, unplug the charging cable from the power socket .
Note:
The charging case will stop working when the battery is low.
Active Noise Canceling & Transparent
The Active Noise Canceling feature will electronically mute background noise. It can be used to enhance the quality of any music or audio that is playing through the earbuds. Transparent Mode enables the earbuds to pick up external sounds, so you can stay aware of your surroundings.
Specifications
- Charging voltage: 5V d.c
- Support profiles: A2DP, AVRCP, HFP
- Working Distance: 10 meters
- Music Time: 4 Hours
- Talk time: 3 Hours
- Standby time: 20 Hours
- Charge time:1.5 Hours
- Earphone Charging Case: 1.5-2 Hours
- Pairing window time: 10 minutes
Non-play automatic power save mode: after 30 seconds the earphone will enter power save mode and then automatically switch off when the low battery alarm sounds.The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc., and any use of such marks by KMART AUSTRALIA is under license.
12-month warranty
Thank you for your purchase from Kmart.Kmart Australia Ltd warrants your new
product to be free from defects in materials and workmanship for the period
stated above, from the date of purchase, provided that the product is used in
accordance with the accompanying recommendations or instructions where
provided. This warranty is in addition to your rights under the Australian
Consumer Law.
Kmart will provide you with your choice of a refund, repair or exchange (where
possible) for this product if it becomes defective within the warranty period.
Kmart will bear the reasonable expense of claiming the warranty. This warranty
will no longer apply where the defect is a result of alteration, accident,
misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer
Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or
alternatively, via Customer Help at kmart.com.au for any difficulties with
your product. Warranty claims and claims for expenses incurred in returning
this product can be addressed to our Customer Service Centre at 690 Springvale
Rd, Mulgrave Vic 3170.Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law. You are entitled to a replacement or refund
for a major failure and compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a
major failure.
For New Zealand customers, this warranty is in addition to statutory rights
observed under New Zealand legislation.
WARNING
-
These Bluetooth earbuds shall be charged by the • Battery and cannot be subjected to high or low pressure at high altitudes during use, storage or transportation.
-
Replacement of a battery with an incorrect type can result in an explosion or the leakage
of flammable liquid or gas. -
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery,
-
that can result in an explosion.
-
Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
-
A battery is subjected to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
-
This product shall not be connected to power supply source exce
-
Please note the earphone working temperature is : 0-40 ℃ . eding PS1 . Rated 5V d.c. 1A
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>