MONSTER MH22002 Clarity 8.0 In-Ear Earphone User Guide
- June 5, 2024
- Monster
Table of Contents
MONSTER MH22002 Clarity 8.0 In-Ear Earphone
Product Overview
- In-ear Earphone x 2 (left & right) Charging Case
- USB-C Charging Cable
- Ear Tips × 3 pairs (M size installed)
- Quick Start Guide and Warranty Letter
- Multi-Function Button（MFB）
- Microphones
- Ear Tip
- Charging contacts
- USB-C Charging Port
- Pair/Reset Indicator Light
- Charging Case Indicator Light
Power On/Off Earphones will turn on when the charging case is opened. To
turn off, place the earphones in the charging case, charging will start when
cover is closed.
Charging Case Wired/Wireless Charging Besides using the included USB-C
charging cable to charge the charging case, the charging case can be charged
by compatible wireless charging device.
Noise Cancellation On/Off Press and hold the MFB of the right earphone
for 2 seconds to switch between different modes. [Noise Cancellation Off] –
[Ambient On] – [Noise Cancellation On] Pairing Left and right earphones
will turn on and connected automatically when the charging case is opened,
“pairing” voice prompt will be heard. For new device connection, go to
Bluetooth settings on your device and search for new devices (new Monster
device), “connected” voice prompt will be heard once the earphones are paired.
When turning on, the earphone will try to connect the last connected device.
To pair a new device, turn off the currently connected Bluetooth device.
Connect other devices Keep the earphones in the charging case and leave
the cover open. Press and hold the Pair / Reset to Factory Settings Button for
about 5 seconds until the light indicator start to flash. It is now in pairing
mode. Activate the Bluetooth on your device and set it to search for new
devices.
Volume Control The earphones do not have a volume control function. After
Bluetooth connection, the volume level can be controlled on the connected
device.
Call Answer / End a call: Single tap the MFB. Reject the call: Press and
hold the MFB for about 2 seconds.
Music Play/Pause music: Single tap the MFB. Previous song: Double-tap the
MFB of the left earphone. Next song: Double-tap the MFB of the right earphone.
Voice Control When the earphone is connected to the phone, press and hold
the MFB of the left earphone to activate the voice assistant.
Reset to Factory Settings
Open the cover of the charging case, keep the left & right earphones in the charging case, press and hold the Pair/ Reset to Factory Settings Button for 10 seconds, the Pair/Reset Red Indicator Light will flash quickly, indicating the earphones are restored to factory settings.
LED Indicator Guide
| Mode | Description | Voice Prompt |
|---|
Power On
|
–
| “Power On”
Power Off| –| “Power Off ”
Pairing
| The white LED indicator of the charging case flashes quickly| “Pairing”
Connected
|
After connected, Indicator light goes off
|
“Connected”
Earphones charging
| When the earphone is charging, the indicator light of the charging case flashes and turns off when it is fully charged|
–
Charging case
| During charging, the indicator light of the charging case is on, and the light is off when it is fully charged|
–
Cautions
- Please place the earphones in the correct location (L/R) for normal charging.
- Replacement of battery (on your own) is not recommended.
- Do not expose battery (battery pack) to excessive heat such as direct sunlight or fire.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
- This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
- FCC ID： 2AVD2-MH22002R
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>